{"product_id":"metal-cloak-jl-wrangler-and-jt-gladiator-rocksport-xd-baller-steering-solution","title":"Metal Cloak JL Wrangler \u0026 JT Gladiator RockSport XD Baller Steering Solution","description":"\u003cp\u003eUpgrade your Jeep JL Wrangler or JT Gladiator steering system with the RockSport Black Steering Kit, featuring the \u003cstrong\u003eRockSport Black XD Steering Stabilizer and 1.625\" OD clamp\u003c\/strong\u003e paired with \u003cstrong\u003eMetalCloak's Baller Joints\u003c\/strong\u003e for unmatched strength and control. Engineered for drivers who demand precise handling and durability without compromise, this system combines the proven performance of a through-shaft stabilizer with the superior articulation and rigidity of the Baller Joints.\u003c\/p\u003e\n\u003cp\u003eFeatures Include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for JL Wrangler \u0026amp; JT Gladiator\u003c\/li\u003e\n\u003cli\u003e1.625\" OD Billet Clamp\u003c\/li\u003e\n\u003cli\u003eOn-Shaft 6-Position Adjustable Damping\u003c\/li\u003e\n\u003cli\u003eThrough-Shaft Design For Neutral Steering Feel\u003c\/li\u003e\n\u003cli\u003eClockable Shock Reservoir For Clearance Flexibility\u003c\/li\u003e\n\u003cli\u003eGold Titanium Nitride Coated (TiN) Shaft\u003c\/li\u003e\n\u003cli\u003eMil-Spec Type III HARD Anodized Black Infinity Finish\u003c\/li\u003e\n\u003cli\u003eCNC Aluminum Billet Tie Rod Mount\u003c\/li\u003e\n\u003cli\u003eLoad Bearing Upper and Lower Joints\u003c\/li\u003e\n\u003cli\u003eHardened Steel Races\u003c\/li\u003e\n\u003cli\u003eInduction-Hardened Chromoly Spindle \u0026amp; Ball\u003c\/li\u003e\n\u003cli\u003eComposite Bushing For Radial Loads \u003cem\u003e(Side to Side Movement)\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003eFully Sealed Top and Bottom O-Ring AND Shaft Wiper Seals\u003c\/li\u003e\n\u003cli\u003eRecessed Zerk Fittings For Easy Service\/Grease\u003c\/li\u003e\n\u003cli\u003eAdjustable Pre-Load for Upper \u0026amp; Lower Joints\u003c\/li\u003e\n\u003cli\u003eMetalCloak Lock Ring Wrench Included\u003c\/li\u003e\n\u003cli\u003eIn-Jeep Rebuildable Upper \u0026amp; Lower\u003c\/li\u003e\n\u003cli\u003eBaller Joints: Gold Zinc, Clear Zinc \u0026amp; Anodized Black Finish\u003c\/li\u003e\n\u003cli\u003eQuick \u0026amp; Easy Installation\u003c\/li\u003e\n\u003cli\u003eMade In The USA\u003c\/li\u003e\n\u003c\/ul\u003e\nThe \u003cstrong\u003eRockSport Black XD Steering Stabilizer\u003c\/strong\u003e through-shaft design applies equal damping force in both directions, preventing the stabilizer from \npushing the steering wheel to one side. This results in balanced, predictable steering and improved on-center feel, especially noticeable at highway speeds and on uneven surfaces.\n\u003cbr\u003e\n\u003cbr\u003e\nThe stabilizer comes with a simple-to-use six-position adjustment knob to change the compression settings with ease, no tools required. Choose from 6 settings that add an additional 10% compression force at each click to tune in your Gold Standard. The adjustment knob provides precise tuning to match vehicle setup and driving conditions. Whether dialing in lighter damping for daily driving or firmer control for oversized tires and aggressive terrain, adjustments can be made quickly without removing the stabilizer.\n\u003cbr\u003e\n\u003cbr\u003e\nThe steering stabilizer reservoir can be clocked to accommodate unique clearance requirements, making it ideal for custom suspension layouts and high-articulation builds. This flexibility allows optimal fitment around track bars, tie rods, and other steering components without compromising performance or travel.\n\u003cbr\u003e\n\u003cbr\u003e\nThe shaft is finished in a titanium nitride coating \u003cem\u003e(TiN)\u003c\/em\u003e to reduce friction and wear at the sealing surfaces, resulting in a smoother operation as well as improved longevity. The low-friction surface allows the stabilizer to react quickly to steering inputs and impacts, delivering consistent damping while standing up to dirt and repeated high-load cycles.\n\u003cbr\u003e\n\u003cbr\u003e\nThe stabilizer body is finished in a Mil-Spec Type III HARD anodized black infinity finish for durability in harsh environments. It provides increased resistance to corrosion, abrasion, and trail debris while maintaining a clean, understated look.\n\u003cbr\u003e\n\u003cbr\u003e\nThe stabilizer comes with a two-piece, CNC aluminum billet tie rod mount. The mount was designed specifically for the MetalCloak tie rod for the Jeep JK\/JL\/JT but will fit any 1.625\" OD tie rod (call in for a different size clamp mount). The tie rod mount has recessed bolt hole locations to protect the hardware from damage and is finished in an anodized black finish for a clean look.\n\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eMetalCloak's Baller Joints\u003c\/strong\u003e use the best features and combine them with top quality materials to create a ball joint replacement set that is unrivaled; this is the only ball joint that is Fully Sealed, Captured, Adjustable, On-Jeep rebuildable and made in the USA. Replace your worn ball joints with the best you can get.\n\u003cbr\u003e\n\u003cbr\u003e\nMetalCloak ball joints start with a Chromoly spindle \u0026amp; ball with an induction-hardened surface strength that resists wear and provides a maximized bearing area to distribute force loads; the material gives superior ability to absorb energy without fracture over inferior materials.\n\u003cbr\u003e\n\u003cbr\u003e\nComposite bearing sleeves slide over the spindle to handle shock loads and are the most resistant to deformation. Ball and spindle are both load bearing and utilize metal-on-metal strength captured with Tool Steel Races that eliminate memory steer and are long-lasting.\n\u003cbr\u003e\n\u003cbr\u003e\nBoth upper and lower joints are adjustable for preload tension, have recessed zerk fittings for servicing and are sealed with multiple Buna-N Rubber O-Rings along with wiper seals on the shafts to keep contaminants out and grease in.\n\u003cbr\u003e\n\u003cbr\u003e\nAluminum lock nut and thread-on top cap capture the joints so there is no possibility of pulling the joints out of the C.\n\u003cbr\u003e\n\u003cbr\u003e\nAnodized black aluminum with Silver and Gold Zinc steel plated components highlight the quality and craftsmanship and are sure to let others know you appreciate American-made quality and top-notch performance. The ONLY joints that are Sealed, Captured, Adjustable, and On-Jeep rebuildable; the last ball joints you will ever need.\n\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e \u003cem\u003eThe billet tie rod mount is designed to fit a 1.625\" OD tie rod.\u003c\/em\u003e\n\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e \u003cem\u003eHardware supplied mounts to OE track bar bracket on axle end. If using a high steer bracket, different hardware to match your application may be required.\u003c\/em\u003e\n\u003cbr\u003e\n\u003cbr\u003e\n\n\u003cbr\u003e\n\u003cbr\u003e\n\u003cdiv\u003e\n\u003ch2\u003eVIDEOS\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003ch3\u003eMetalCloak's Jeep Suspension\u003c\/h3\u003e\n\n\n\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003ch4\u003eBall Joints\u003c\/h4\u003e\n\u003cp\u003eThe MetalCloak Ball Joints are Upper\/Lower Bearing, Captured, Fully Sealed, Adjustable, and in-Jeep rebuildable. Made in the USA.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ciframe allowfullscreen=\"allowfullscreen\" frameborder=\"0\" src=\"https:\/\/player.vimeo.com\/video\/873186889?title=0\u0026amp;byline=0\u0026amp;portrait=0\" style=\"width:100%;aspect-ratio:16\/9;height:auto;border:0;\"\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003ciframe allowfullscreen=\"allowfullscreen\" frameborder=\"0\" src=\"https:\/\/player.vimeo.com\/video\/764017204?title=0\u0026amp;byline=0\u0026amp;portrait=0\" style=\"width:100%;aspect-ratio:16\/9;height:auto;border:0;\"\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch4\u003eProudly Made in the USA\u003c\/h4\u003e\n\u003cp\u003eMetalCloak proudly manufactures products in America. Take a glimpse of our incredible team that lives and breathes innovation and quality.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003ch4\u003eWhat is Corner Travel Index?\u003c\/h4\u003e\n\u003cp\u003eSince 2014 MetalCloak has tested thousands and thousands of rigs at events all across the country collecting specs on the build and cataloging the results. The data collected allows us to make our own products better.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ciframe allowfullscreen=\"allowfullscreen\" frameborder=\"0\" src=\"https:\/\/player.vimeo.com\/video\/719260295?title=0\u0026amp;byline=0\u0026amp;portrait=0\" style=\"width:100%;aspect-ratio:16\/9;height:auto;border:0;\"\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003ciframe allowfullscreen=\"allowfullscreen\" frameborder=\"0\" src=\"https:\/\/player.vimeo.com\/video\/372755776?title=0\u0026amp;byline=0\u0026amp;portrait=0\" style=\"width:100%;aspect-ratio:16\/9;height:auto;border:0;\"\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\n\u003ch4\u003eWhy Gold Zinc?\u003c\/h4\u003e\n\u003cp\u003eIt's time for The MetalCloak Minute... where we answer frequently asked questions in about a minute. Today's topic: Gold Zinc.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch2\u003eTHE TECH\u003c\/h2\u003e\n\u003cdiv\u003e\n\n\u003cdiv\u003e\n\u003ch2\u003eRockSport Black Steering Stabilizer\u003c\/h2\u003e\n\u003ciframe allowfullscreen=\"allowfullscreen\" frameborder=\"0\" src=\"https:\/\/metalcloak.sirv.com\/JL\/2550\/2550.spin\" style=\"width:100%;aspect-ratio:16\/9;height:auto;border:0;\"\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003cdiv\u003e\n\u003ch2\u003eThrough-Shaft Design\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe RockSport Black Steering Stabilizer's through-shaft design applies equal damping force in both directions, preventing the stabilizer from pushing the steering wheel to one side. This results in balanced, predictable steering and improved on-center feel, especially noticeable at highway speeds and on uneven surfaces.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cimg alt=\"Full view of the RockSport Black through-shaft steering stabilizer resting on a workbench, showing the complete assembly with billet mount and reservoir.\" src=\"https:\/\/images.metalcloak.com\/MetalCloak-Magento\/Products\/2550-RockSport-Black-Steering-Stabilizer\/2550-RockSport-Black-Steering-Stabilizer-Through-Shaft-Design.jpg\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv\u003e\n\u003ch2\u003eSix-Position Adjustment\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cimg alt=\"Macro view of the RockSport Black steering stabilizer adjustment knob showing six-position adjustable damping with plus and minus markings.\" src=\"https:\/\/images.metalcloak.com\/MetalCloak-Magento\/Products\/2550-RockSport-Black-Steering-Stabilizer\/2550-RockSport-Black-Steering-Stabilizer-Six-Positions.jpg\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe stabilizer comes with a simple-to-use six-position adjustment knob to change the compression settings with ease, no tools required. Choose from 6 settings that add an additional 10% compression force at each click to tune in your Gold Standard. The adjustment knob provides precise tuning to match vehicle setup and driving conditions. Whether dialing in lighter damping for daily driving or firmer control for oversized tires and aggressive terrain, adjustments can be made quickly without removing the stabilizer.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv\u003e\n\u003ch2\u003eClockable Shock Reservoir\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe steering stabilizer reservoir can be clocked to accommodate unique clearance requirements, making it ideal for custom suspension layouts and high-articulation builds. This flexibility allows optimal fitment around track bars, tie rods, and other steering components without compromising performance or travel.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cimg alt=\"Detailed view of the RockSport Black steering stabilizer featuring a clockable shock reservoir mounted on the stabilizer body with branding visible.\" src=\"https:\/\/images.metalcloak.com\/MetalCloak-Magento\/Products\/2550-RockSport-Black-Steering-Stabilizer\/2550-RockSport-Black-Steering-Stabilizer-Clockable-Shock-Reservoir.jpg\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv\u003e\n\u003ch2\u003eGold Titanium Nitride Coated Shafts\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cimg alt=\"Close-up of the RockSport Black steering stabilizer highlighting the gold titanium nitride-coated shaft and rod end hardware.\" src=\"https:\/\/images.metalcloak.com\/MetalCloak-Magento\/Products\/2550-RockSport-Black-Steering-Stabilizer\/2550-RockSport-Black-Steering-Stabilizer-Gold-Shafts.jpg\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe shaft is finished in a titanium nitride coating \u003cem\u003e(TiN)\u003c\/em\u003e to reduce friction and wear at the sealing surfaces, resulting in a smoother operation as well as improved longevity. The low-friction surface allows the stabilizer to react quickly to steering inputs and impacts, delivering consistent damping while standing up to dirt and repeated high-load cycles.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv\u003e\n\u003ch2\u003eAluminum Billet Tie Rod Mount\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe stabilizer comes with a two-piece, CNC aluminum billet tie rod mount. The mount was designed specifically for the MetalCloak tie rod for the Jeep JK\/JL\/JT but will fit any 1.625\" OD tie rod. The tie rod mount has recessed bolt hole locations to protect the hardware from damage and is finished in an anodized black finish for a clean look.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e \u003cem\u003eThe billet tie rod mount is designed to fit a 1.625\" OD tie rod.\u003c\/em\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cimg alt=\"Close-up of a RockSport Black steering stabilizer showing the aluminum billet tie rod mount clamped together with gold titanium nitride-coated shaft visible.\" src=\"https:\/\/images.metalcloak.com\/MetalCloak-Magento\/Products\/2550-RockSport-Black-Steering-Stabilizer\/2550-RockSport-Black-Steering-Stabilizer-Billet-Mount.jpg\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv\u003e\n\u003ch2\u003eBillet Mount Captured Bolt Design\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cimg alt=\"RockSport Black steering stabilizer tie rod clamp with captured through-bolt, top nut, and retained spherical bearing.\" src=\"https:\/\/images.metalcloak.com\/MetalCloak-Magento\/Products\/2550-RockSport-Black-Steering-Stabilizer\/2550-RockSport-Black-Steering-Stabilizer-Captured-Bolt.jpg\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe RockSport Black Steering Stabilizer uses a through-bolt tie rod mount captured by a nut rather than threaded aluminum, eliminating thread loading to reduce stress risers and improve long-term durability. When installed, the bolt is positively captured by the tie rod and top-side nut to prevent the clamp bracket from becoming unsecured. A retained spherical bearing inside the clamp supports the bolt, allowing smooth articulation while isolating clamp forces from the aluminum mount.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv\u003e\n\u003ch2\u003eUpper \u0026amp; Lower \"Baller\" Ball Joints\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003eMetalCloak offers the ONLY ball joints that are comprised of top level materials with ALL the best features contained in one package; this is the last ball joint you will need. Upper and Lower Load Bearing, Captured, Fully Sealed, Adjustable, In-Jeep rebuildable and made in the USA.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cimg alt=\"Two renderings of ball joints, one black and gold and one gold, on a white background.\" src=\"https:\/\/images.metalcloak.com\/MetalCloak-Magento\/Products\/1911-JL-Wrangler-Ball-Joint-Upgrade\/1911-Ball-Joint-Upgrade-Kit.jpg\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv\u003e\n\u003ch2\u003eUpper \"Baller\" Ball Joint\u003c\/h2\u003e\n\u003cp\u003e(Give it a spin to see a 360 view)\u003c\/p\u003e\n\u003ciframe allowfullscreen=\"allowfullscreen\" frameborder=\"0\" src=\"https:\/\/metalcloak.sirv.com\/JL\/1911%20v4%20alt\/1911%20v4%20alt.spin\" style=\"width:100%;aspect-ratio:16\/9;height:auto;border:0;\"\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003cdiv\u003e\n\u003ch2\u003eUpper Ball Joint Diagram\u003c\/h2\u003e\n\u003cimg alt=\"Labeled diagram of the MetalCloak upper Baller ball joint, including the black anodized cap, O-rings, wave spring, and split pin.\" src=\"https:\/\/images.metalcloak.com\/MetalCloak-Magento\/Products\/1911-JL-Wrangler-Ball-Joint-Upgrade\/1911-Upper-Ball-Joint-Diagram.jpg\" style=\"max-width:100%;height:auto;\"\u003e\n\u003c\/div\u003e\n\n\u003cdiv\u003e\n\u003ch2\u003eThread Together Captured Design\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cimg alt=\"Front view of an axle C, featuring secure ball joints and an aluminum lock nut for stability.\" src=\"https:\/\/images.metalcloak.com\/MetalCloak-Magento\/Products\/1911-JL-Wrangler-Ball-Joint-Upgrade\/1911-Ball-Joint-Captured-Design.gif\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eBall joints press in from the bottom of the C. Aluminum lock nut and top cap thread on to capture the joints so there is no possibility of the joint pulling out.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv\u003e\n\u003ch2\u003eLoad Bearing Joints\u003c\/h2\u003e\n\u003cp\u003ePre-load on MetalCloak upper ball joints share force-loads from the lower joint and divide the load between both pivot locations unlike most \"other\" ball joints.\u003c\/p\u003e\n\u003cimg alt='Comparison of axle designs showing force load distribution differences between \"Other Manufacturers\" and \"Metalcloak\".' src=\"https:\/\/images.metalcloak.com\/MetalCloak-Magento\/Products\/1911-JL-Wrangler-Ball-Joint-Upgrade\/1911-Force-Load-Comparison.jpg\" style=\"max-width:100%;height:auto;\"\u003e\n\u003c\/div\u003e\n\n\u003cdiv\u003e\n\u003ch2\u003eSpindle \u0026amp; Ball Benefits\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003eMetalCloak \"Baller\" ball joint Spindle\/Ball units are formed of solid Chromoly steel for durability and then are induction hardened for incredible surface strength that resists wear. The oversized bearing surface provides maximum area to distribute force loads from on- and off-road use and abuse. The induction hardening provides unsurpassed longevity for smooth bearing operation. The Baller Joint Spindle\/Ball composition is the best you can get to absorb energy without possibility of fracture while maintaining an ideal hardened bearing surface that ensures a long service life; it's quality you can count on.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cimg alt=\"A metal spindle and ball with a lathe tailstock taper laying on a wooden surface.\" src=\"https:\/\/images.metalcloak.com\/MetalCloak-Magento\/Products\/1911-JL-Wrangler-Ball-Joint-Upgrade\/1911-JL-Wrangler-Shaft-And-Ball-Benefits.jpg\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv\u003e\n\u003ch2\u003eBearing Races\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cimg alt=\"Two-part metal bearing races with a circular design, on a wooden surface.\" src=\"https:\/\/images.metalcloak.com\/MetalCloak-Magento\/Products\/1911-JL-Wrangler-Ball-Joint-Upgrade\/1911-JL-Wrangler-Ball-Joint-Bearing-Races.jpg\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe Concave Bearing Races are high-impact, shock-resistant, machined and heat-treated tool steel with maximum surface contact to spread force loads; this allows more pre-load relief while still resisting memory steer. Races are indexed to prevent rotation inside the ball joint housing.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv\u003e\n\u003ch2\u003eLower \"Baller\" Ball Joint\u003c\/h2\u003e\n\u003cp\u003e(Give it a spin to see a 360 view)\u003c\/p\u003e\n\u003ciframe allowfullscreen=\"allowfullscreen\" frameborder=\"0\" src=\"https:\/\/metalcloak.sirv.com\/JL\/1911%20lower\/1911%20lower.spin\" style=\"width:100%;aspect-ratio:16\/9;height:auto;border:0;\"\u003e\u003c\/iframe\u003e\n\u003c\/div\u003e\n\n\u003cdiv\u003e\n\u003ch2\u003eLower \"Baller\" Ball Joint Diagram\u003c\/h2\u003e\n\u003cimg alt=\"Exploded diagram of a mechanical joint with labeled parts, including races, seals, and tensioner.\" src=\"https:\/\/images.metalcloak.com\/MetalCloak-Magento\/Products\/1911-JL-Wrangler-Ball-Joint-Upgrade\/1911-Lower-Ball-Joint-Diagram.jpg\" style=\"max-width:100%;height:auto;\"\u003e\n\u003c\/div\u003e\n\n\u003cdiv\u003e\n\u003ch2\u003eBall Joint Wrench\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe included wrench is specially designed and laser-cut to precisely fit the lower ball joint lock ring and allows for ease of installation. The wrench is made of laser-cut 3\/16\" hot-rolled steel, the tool is finished in gold zinc for a classic premium look and long-lasting MetalCloak quality.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cimg alt=\"A hand holding a spanner wrench with lower ball joint over a vise, with tool bins in the background.\" src=\"https:\/\/images.metalcloak.com\/MetalCloak-Magento\/Products\/1911-JL-Wrangler-Ball-Joint-Upgrade\/1911-Ball-Joint-Upgrade-Wrench.jpg\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv\u003e\n\u003ch2\u003eHand Built and Made in America\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\u003cimg alt=\"Hands assembling a black cap on a ball joint on a white workbench.\" src=\"https:\/\/images.metalcloak.com\/MetalCloak-Magento\/Products\/1911-JL-Wrangler-Ball-Joint-Upgrade\/1911-Made-In-America.jpg\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/div\u003e\n\u003cdiv\u003e\n\u003cp\u003eThe MetalCloak Upper and Lower \"Baller\" Ball Joints are each meticulously assembled in-house with hand-built craftsmanship right here in the USA.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003cdiv\u003e\n\u003ch2\u003eWhat's in the Kit?\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cul\u003e\n\u003cli\u003eSteering Stabilizer\u003c\/li\u003e\n\u003cli\u003eStabilizer Billet Mount\u003c\/li\u003e\n\u003cli\u003eUpper Ball Joints\u003c\/li\u003e\n\u003cli\u003eLower Ball Joints\u003c\/li\u003e\n\u003cli\u003eBall Joint Wrench\u003c\/li\u003e\n\u003cli\u003eAll Required Hardware\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e\u003cimg alt=\"Contents of the MetalCloak JL Wrangler \u0026amp; JT Gladiator RockSport Black Steering Kit, including the steering stabilizer, stabilizer billet mount, upper and lower ball joints, ball joint wrench, and all required hardware.\" src=\"https:\/\/images.metalcloak.com\/MetalCloak-Magento\/Products\/7720-JL-Wrangler-RockSport-Black-Steering-Kit\/7720-Whats-In-The-Kit.jpg\" style=\"max-width:100%;height:auto;\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eTECHNICAL SPECIFICATIONS\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cbr\u003e\n\u003cbr\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eItems\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatibility\u003c\/td\u003e\n\u003ctd\u003e2018+ JL Wrangler \u0026amp; 2020+ JT Gladiator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStabilizer\u003c\/td\u003e\n\u003ctd\u003e2\" OD x 1\/4\" Wall 6061-T6511 Aluminum Tube\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShafts\u003c\/td\u003e\n\u003ctd\u003e.625\" Round Bar\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBillet Mount\u003c\/td\u003e\n\u003ctd\u003eAluminum 6061-T6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRockSport Black Stabilizer Coating\u003c\/td\u003e\n\u003ctd\u003eHard Anodized Black Finish - Stabilizer Body\u003cbr\u003eGold Titanium Nitride - Shaft\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Ball Joint Cap\u003c\/td\u003e\n\u003ctd\u003e6061 Aluminum Hex\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Ball Joint Spindle\u003c\/td\u003e\n\u003ctd\u003eChromoly Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUpper Ball Joint Housing\u003c\/td\u003e\n\u003ctd\u003e1045 Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLower Ball Joint Cup\u003c\/td\u003e\n\u003ctd\u003e1045 Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLower Ball Joint Spindle\u003c\/td\u003e\n\u003ctd\u003eChromoly Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBall Joint Wrench\u003c\/td\u003e\n\u003ctd\u003e3\/16\" Hot-Rolled Steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBaller Joint Coating\u003c\/td\u003e\n\u003ctd\u003eGold Zinc | Clear Zinc | Black Anodized\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eIMPORTANT NOTES\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eTie Rod Mount:\u003c\/strong\u003e \u003cem\u003eThe billet tie rod mount is designed to fit a 1.625\" OD tie rod.\u003c\/em\u003e\n\u003cbr\u003e\n\u003cbr\u003e\n\u003cstrong\u003eHi-Steer Bracket:\u003c\/strong\u003e \u003cem\u003eHardware supplied mounts to OE track bar bracket on axle end. If using a high steer bracket, different hardware to match your application may be required.\u003c\/em\u003e\n\u003cbr\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\n\u003ch2\u003eINSTALLATION\u003c\/h2\u003e\n\u003cdiv\u003e\n\u003cdiv\u003e\n\u003cbr\u003e\n\u003cbr\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eDifficulty\u003c\/td\u003e\n\u003ctd\u003eEasy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBody Modification\u003c\/td\u003e\n\u003ctd\u003eNone\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTime to Install\u003c\/td\u003e\n\u003ctd\u003e4-5 Hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003cbr\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch4\u003eFitment \u0026amp; Specifications\u003c\/h4\u003e\n\u003ctable style=\"border-collapse:collapse;width:100%;\"\u003e\n\u003ctr\u003e\n\u003cth style=\"padding:6px 10px;border:1px solid #ddd;text-align:left;background:#f5f5f5;\"\u003eBrand\u003c\/th\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eMetal Cloak\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"padding:6px 10px;border:1px solid #ddd;text-align:left;background:#f5f5f5;\"\u003eProduct Type\u003c\/th\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eShocks \u0026amp; Shock Mounts\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"padding:6px 10px;border:1px solid #ddd;text-align:left;background:#f5f5f5;\"\u003eVehicle Fitment\u003c\/th\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003eJeep Wrangler JL, Jeep Gladiator JT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth style=\"padding:6px 10px;border:1px solid #ddd;text-align:left;background:#f5f5f5;\"\u003ePart Number\u003c\/th\u003e\n\u003ctd style=\"padding:6px 10px;border:1px solid #ddd;\"\u003e7720\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e","brand":"Metal Cloak","offers":[{"title":"Default Title","offer_id":53258126852383,"sku":"7720","price":1298.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0913\/9932\/3935\/files\/7720-new-with-logo.jpg?v=1794739900","url":"https:\/\/offroadtoyoutfitters.com\/products\/metal-cloak-jl-wrangler-and-jt-gladiator-rocksport-xd-baller-steering-solution","provider":"Offroad Toy Outfitters","version":"1.0","type":"link"}