Metal Cloak Jeep JK Wrangler 5.5" 4-Link, Bolt-On Long Arm Suspension & Lift Kit
Couldn't load pickup availability
Want it installed?
Our techs can fit it at the shop in Vancouver, WA. Book an install or call (360) 440-6375.
Shop safely
Secure your shopping experience with various safe and trusted payment methods.
The Jeep JK Wrangler 4-Link Long Arm Suspension System integrates advanced technology with bolt-on long arm correction brackets, optimizing control arm geometry for superior performance at the 5.5" lift height. (metalcloakpatents.com).
Add to Your Kit
Front Driveshaft Clearance?
- I Have An Aftermarket Front JK Driveshaft (no added parts)
- '07-'11 (No Exhaust Spacer Required) (no added parts)
- '12-'18 (Exhaust Spacer Required) (Metal Cloak Jeep JK Wrangler Exhaust Spacer Kit ('12 - '18))
- ‘12-’18 Automatic Trans Front Driveshaft (Metal Cloak JK/JL Front Driveshaft, Auto Transmission)
- ‘07-’11 Automatic/'07 - '18 Manual Front Driveshaft (Metal Cloak JK Front Driveshaft, ('07 - '11 Auto) ('07 - '18 Manual))
Features Include:
- Fits 2007-2018 JK Wrangler & Wrangler Unlimited
- Front Weld-On Upper Control Arm Brackets
- Rear Bolt-On Long Arm Brackets
- High-Misalignment Vibration Dampening Duroflex™ Control Arms
- Front Durotrak™ Bushing-Equipped Track Bar
- Rear Durotrak™ Bushing-Equipped Track Bar
- Rear Coil Alignment Retainers
- True Dual Rate™ Coils
- Front Coil Isolators
- 6Pak Shocks
- Steering Stabilizer
- HD Drag Link
- Track Bar and Stabilizer Relocation Bracket
- Hi-Clearance Rear Track Bar Bracket
- Shock Mount Relocation Brackets
- Adjustable Bump Stops
- 3-Layer Stainless Steel Extended Brake Lines
- Made in the USA
The upper front arms, made from 1.5" OD x 9/32" wall DOM tubing, include forged ends for enhanced strength and are fully adjustable in length. Both front and rear control arms incorporate our patented Duroflex™ bushings, ensuring bind-free, maintenance-free articulation.
The rear long arms require the removal of factory rear control arm brackets but offer the best geometry MetalCloak has engineered. This optimized design enhances acceleration response, minimizes wheelbase changes, and delivers superior handling at high speeds.
The lower rear long arms, crafted from thick 2.0" OD x .250" wall DOM steel, provide exceptional strength and durability with forged threaded ends. The upper rear control arms, made from 1.5" OD x .1875" wall DOM tubing, are specially formed for maximum clearance during suspension travel.
For easy installation, the 100% bolt-on rear long-arm brackets are constructed from fully welded 1/4" steel plate with angled surfaces to help glide over obstacles effortlessly.
This system combines cutting-edge technologies, including True Dual Rate™ Coils, revolutionary DuPont™ Kevlar® fiber-enhanced Duroflex™ Joints, and two-piece Durotrak™ bushing-equipped track bars, resulting in an unmatched off-road experience.
Designed for straightforward installation, this complete long-arm system includes everything needed: front and rear long arms, shocks, track bars, a steering stabilizer, brake lines, bump stops, and all required hardware.
With superior travel, articulation, clearance, and flex, this system delivers a smooth, predictable ride both on and off-road, all at a fraction of the modifications required by other long-arm kits, offering outstanding value.
Note: All 2012+ JK Wranglers will require either exhaust spacers or a driveshaft. Please see the "What's This?" link on the front driveshaft clearance option.
Note: 6Pak Shocks are not shipped outside of North America. If you are outside of the USA or Canada and order 6Pak shocks or any kit with 6Pak shocks, you are waiving the rights to the lifetime customer service and manufacturer's warranty.
Note: Due to the long travel MetalCloak suspensions provide, factory driveshafts will contact OEM components and wear quickly at the extremes of articulation. Aftermarket front and rear driveshafts are required.
Note: This suspension requires an Exhaust Loop Bypass Pipe on 2012+ JK Wranglers.
Note: MetalCloak engineers have chosen shocks that have been proven to have the ideal synergy with our systems. We have not tested other shocks on the market as to whether or not they complement our Game-Changer system or suppress its performance.
Note: We recommend you have a suspension specialist align your Jeep once a MetalCloak suspension is installed.
Note: MetalCloak does not recommend powder coating your True Dual Rate Coils. See instructions for additional details.
Note: This item is being offered as a complete system that contains all the components shown. We cannot customize, replace or remove a component from the kit. If you need a custom order, all components are available individually and our sales team is happy to help you place your order.
Note: If you purchase this system and decide you do not need a component or part of the system, we cannot accept returns.
VIDEOS
MetalCloak's Jeep JK Wrangler Suspension Systems are the proven leader among production suspension systems
MetalCloak True Dual Rate Coils vs Rock Krawler, Teraflex & Skyjacker
We take a deep dive into coil spring performance in this side-by-side comparison of MetalCloak's True Dual Rate coils against Rock Krawler, Teraflex, and Skyjacker options.
Disassembling a MetalCloak RockSport Black Shock
Take a deep dive into the MetalCloak RockSport Black Shock. Watch as we fully disassemble the shock and break down everything that makes it a top performer on and off the trail.
Duroflex 101
This short video covers what you need to know about the basics of the Duroflex Joint. How it should be used and what to expect when using it.
Why Gold Zinc?
It's time for The MetalCloak Minute, where we answer frequently asked questions in about a minute. Today's topic: Gold Zinc.
Duroflex Joint Maintenance
It's time for The MetalCloak Minute, where we answer frequently asked questions in about a minute. Today's topic: Joint Maintenance.
Duroflex Joint Revealed
The MetalCloak Duroflex Joint gives better dampening properties over OEM style rubber Clevite Joints and provides more misalignment than "other" inferior Flex Joints.
Vibration Dampening
We tested our Duroflex Joint using a "Shaker Table" and seismometer app to show how much Vibration Dampening the Duroflex Joint gives you compared to other industry-leading joints.
A Comparison of Flex
Comparing the Flex of the Duroflex Joint with that of the Johnny Joint, the Teraflex Monster and the typical Clevite.
True Dual Rate Centered Coils 101
This short video covers all you need to know about MetalCloak's True Dual Rate Centered Coils.
Durotrak™ Bushing
Eliminate squeaks and clunks in your steering with the technology of MetalCloak's Durotrak™ bushings, exclusively found in MetalCloak track bars.
Outboard Shock Mount
Move the front lower shock mounts away from the Jeep frame rails and rotate the shock eyelet from the factory position by 90 degrees, allowing it to swing with the axle vs bind on the bushing.
What is Corner Travel Index?
Since 2014, MetalCloak has tested thousands and thousands of rigs at events all across the country collecting specs on the build and cataloging the results. The data collected allows us to make our own products better.
FMVSS 126 Compliant
MetalCloak not only has the best off-road flex, but we are also Federal Motor Vehicle Safety Standard 126 certified and compliant. No other company can match our on- and off-road performance.
THE TECH
What's in the Kit?

- Front Long Arm Duroflex Control Arms
- Rear Long Arm Duroflex Control Arms
- Front & Rear True Dual Rate™ Coils
- Front Coil Isolators
- Rear Long Arm Bracket
- Drag Link
- Track Bar and Stabilizer Relocation Bracket
- Front & Rear Durotrak™ Track Bars
- Rear Track Bar Bracket
- Front & Rear Adjustable Bump Stops
- Front & Rear Extended Brake Lines
- Front & Rear Sway Bar Links
- Choose Your Shock Option
If You Choose...
- Choose My Own - Get Outboard Shock Mounts, No Shocks
- RockSport Red - Get RockSport Red Shocks & Outboard Shock Mounts
- RockSport Black - Get RockSport Black Shocks & Outboard Shock Mounts
- 6Pak Shocks - Get 6Pak Shocks & Mounting Hardware
IT ALL STARTS WITH THE BUSHINGS
The Patented Duroflex™ Joint (metalcloakpatents.com) is the key to getting the greatest flex in a JK Wrangler bolt-on suspension kit. Period.
MetalCloak has taken the best features of the most widely used control arm joints and combined those features to create the Duroflex Joint, producing a Low-Maintenance, High-Misalignment (34˚), Self-Centering, Rebuildable Joint with an OEM quality ride.
Now with Kevlar!
DuPont™ Kevlar® Fiber is now compounded in the proprietary elastomer of the Duroflex Bushing, bringing even more strength, durability and performance.
Kevlar® is a synthetic fiber with an extremely high tensile strength-to-weight ratio…five times stronger than steel and commonly used in bulletproof armor applications.
Duroflex Bushings w/Kevlar® can be identified by the MetalCloak "M" located on the outer surface.

Control Arm Duroflex Joint Alignment...

At MetalCloak we take the care to build every product right.
Most manufacturers build their control arms misaligned from center. Why? It simply costs less to do so.
By not cutting any corners, our joints are Centered and Aligned reducing wear and improving performance.
It makes them easier to install, too!
Lower Front 4-Link Long Arms
The Lower Front Control Arms are precision-engineered for our 4-link front suspension. Mounted using a bolt-on bracket, the control arms are designed for lift heights of 4.5" and up, provide amazing flex, the best pinion angle control for taller lifts, and still give incredible handling and the smoothest ride on- or off-road.

Upper Front 4-Link Long Arms

The Upper Front Control Arms are installed using a welded-on bracket for precise geometry.
Equipped with the Duroflex™ joints at the frame end, the arms use the stock bushings or the MetalCloak Bushing Upgrade Kit (not included) at the axle end.
Threaded Forged Ends
Forged for Strength...
The adjustable threaded ends are forged, providing a 37% higher fatigue strength over inferior cast parts; this EXTRA rock bashing strength will hold up to whatever you throw at 'em.

Control Arm Specs
JK Wrangler Lower Front (SKU #7224)
- CNC Machined
- 1/4" Wall DOM Steel
- 2.0" OD
- Threaded Forged Ends
- Precision Locking Nut
- Gold Zinc Plated
- Duroflex Joint at Both Ends
JK Wrangler Upper Front (SKU #7291)
- CNC Machined
- 9/32" Wall DOM Steel
- 1.5" OD
- 1/4" Steel Clevis
- Precision Locking Nut
- Gold Zinc Plated
- Threaded Forged Ends
- Duroflex Joint
JK Wrangler Lower Rear (SKU #7294)
- CNC Machined
- 1/4" Wall DOM Steel
- 2.0" OD
- Precision Locking Nut
- Gold Zinc Plated
- Duroflex Joint at Both Ends
- Lengthened for Best Axle Position
- Threaded Forged Ends
JK Wrangler Upper Rear (SKU #7293)
- CNC Formed
- 3/16" Wall DOM Steel
- 1.5" OD
- Precision Locking Nut
- Threaded Forged Ends
- Designed for Oversize Tire Clearance
- Gold Zinc Plated
- Duroflex Joint at Both Ends
- Lengthened for Best Axle Position
Degrees of Articulation
MetalCloak's Duroflex Joint provides 28˚ more articulation and flex than typical control arms! (Learn More About Duroflex Control Arms)
What are True Dual Rate Coils?
MetalCloak JK Wrangler True Dual Rate™ Coils have one of the longest free lengths in the industry for greater articulation without sacrificing the OEM ride quality.
Without the advantage of the Dual Rate Design, the required Spring Rate would be too low and "squishy" -- just loading your Jeep up with supplies would affect ride height and quality. (Learn More About True Dual Rate Coils)
4-Door True Dual Rate Coils
2-Door True Dual Rate Coils
Coil Isolators

MetalCloak Thermoset Elastomer Coil Isolator upgrade pads are designed to last and outperform factory parts. The pads are made specifically for MetalCloak True Dual Rate Coils and are model specific.
Not just any track bar bushing...meet the Patented Durotrak
The Patented Durotrak™ Bushing (metalcloakpatents.com) is an NVH (noise, vibration, harshness) bushing made with a proprietary elastomer compound unique to MetalCloak. The Durotrak™ two-part bushing is comprised of two pieces that thread together, making this bushing simple to install without a press; it reduces vibration and harshness transferred to the driver and improves vehicle steering input. (Learn More About Durotrak Track Bars Front / Rear)

Front Track Bar Forged End

The adjustable threaded ends are forged, providing a 37% higher fatigue strength over inferior cast parts; this EXTRA rock bashing strength will hold up to whatever you throw at 'em.
Solid Chromoly front track bar keeps you... well... on track
Formed for ultimate Up-Travel & Down-Travel, the JK Wrangler Front Track Bar gives unprecedented strength, clearance, and improved ride stability.
JK Wrangler Durotrak rear track bar - A first in Hi-Clearance!
The Solid Chromoly track bar is uniquely designed to clear on up-travel as well as down-travel. No other track bar is designed with up-travel in mind.
Rear bolt-on bracket is a key component
The rear relocation and clearance track bar bracket provides what it takes to allow the track bar to keep your axle centered properly under your Jeep.
Lower Rear Long Arm Brackets
This system requires cutting off the factory rear control arm brackets and is for the rock crawler that demands precision when it comes to wheelbase and pinion angles. The Rear Long Arm System comes with rear "BOLT-ON" control arm brackets that are formed of 1/4" steel plate and angled to slide over obstacles without catching.

Drag Link With Greasable 1-Ton Ends
High-misalignment rod ends, double adjustable, 1.375" OD, .375" wall DOM, and clears aftermarket diff covers. (Learn More About Hi Steer Kit)
Dog Leg Tie Rod Ends

Boot Sealed - Keeps grease in and dirt out
Anti-Flop Feature - Precision range of movement
Massive 1-Ton Rod Ends - Provides additional strength
JK Specific OE Bolt Taper - Secure mount
Anti-Flop Feature
This specially designed rod end has been engineered just for the JK Wrangler steering.
Full side-to-side range of motion ensures bind-free steering when pushing the extremes of your Jeep's travel and articulation, while a limited "front to back" range of movement is built into the rod end and eliminates the possibility of the offset allowing the rod end to "flop".

Track Bar and Stabilizer Relocation Bracket

The bracket raises the track bar to re-correct steering geometry when lifting over 3.5 inches; this is to be used in conjunction with the flipped drag link hi-steer setup ONLY when lifting a Jeep JK over 3.5 inches. The bracket also incorporates a raised mount for the steering stabilizer, providing additional clearance!
Rear Coil Alignment Retainers
Corrects the alignment for your rear coils and keeps them from bowing during compression and interfering with other components.
This system also features a retainer that ensures your coil spring stays seated in the coil bucket at the extremes of articulation and prevents rattling in the coil bucket. (Learn More About Rear Coil Retainers)

Stop The Guess Work. Bump It Up!

MetalCloak Adjustable Bump Stop System...
- Adjust from 1" - 4" Without Removing Coils
- Perfect Height Regardless of Tire Size
- Thermoset Elastomer Dampens Impact
- Additional Pads Available on Request
(Learn More About Front Adjustable Bump Stops)
Rear Adjustable Bump Stops!
Manufactured from trail-proven natural thermoset elastomer, each puck is designed to work universally with your JK Wrangler.
Designed specifically for the JK Wrangler, the system comes with 4 rectangular pucks, allowing for easy adjustment between 1" - 4". (Learn More About Rear Adjustable Bump Stops)

JK Wrangler Replacement Brake Lines, 24.5"
From the Teflon Inner Core, to the Stainless Steel Braid and Poly Safety Coat, the MetalCloak replacement Brake Lines are the best available on the market today.
Longer than typical brake lines of similar lift heights because of our additional clearance and travel. (Learn More About Replacement Brake Lines)
Outboard Shock Mount
MetalCloak Jeep JK Outboard Front Lower Shock Mount Spacer Kit:
- Engineered to move the lower shock mounts away from the Jeep frame rails increasing clearance for the shock body at the extremes of articulation.
- All Grade 8 hardware provided.
- Treated with Gold Zinc Chromate for the ultimate in defense against the elements.
- Manufactured from laser-cut 3/16" steel and CNC bent for superior strength and exact fitment.

Bracket rotates shock eyelet; allows it to swing with the axle vs bind on the limited elastomer material. The Outboard Front Lower Shock Mount Spacer comes in the No Shock and RockSport shock kits only. The 6Pak Shocks do not require the outboard shock mount. (Learn More About The Outboard Shock Mount)
Important Note: If using OE wheels, 2" spacers will be needed to give proper clearance. These mounts are intended for use for wheels with 4.5" of backspacing or less or an equivalent of a 2" spacer on factory wheels.
Choose Your Shocks
The 6Pak™ Black Shock
The MetalCloak 6Pak™ Black Shock (Patented) is the first and only shock engineered to deliver maximum travel in the shortest compressed length possible.
This revolutionary design gives your Jeep more articulation than any conventional shock while maintaining ride comfort and control on any terrain. The 6Pak™ shock allows your suspension to reach its full potential, delivering stability, performance, and confidence.
The 6Pak Floating Shock Body Technology provides a game-changing platform featuring parallel shafts extending from the 6-tube floating body. The shock is centralized with dual opposed, nitrogen-charged reservoirs that give additional cooling capacity.

6Pak Shock Bushing Ends
The precision-machined billet rod ends are completely rebuildable, giving you the ability to service your shocks and keep them performing. The billet cap ends add a refined, finished look while maintaining the strength and integrity of the shock assembly.

6Pak Shock Internals
The engineered main seal material increases durability and longevity, standing up to the elements and heavy use for reliable performance. Combined with its patented design, which delivers more travel in a shorter package, the 6Pak™ maximizes suspension articulation while preserving up-travel. Precision-tuned valving balances daily driving comfort with confident control on technical trails.
6Pak Shock Shafts
The 6Pak™ features a robust 5/8" shaft designed for strength and stability under extreme use. This larger shaft size resists bending and flexing, ensuring consistent performance no matter how hard you push your suspension.
Each shaft is Titanium Nitride coated, providing a slick, low-friction surface that resists wear, reduces stiction, and extends the life of the shock.


The RockSport RED Long Travel Shock
It's not just a shock, it is a piece in a tuned system. This is not a typical bolt-on shock. RockSport RED shocks are valved and specifically tuned to work with MetalCloak True Dual Rate Coils.
MetalCloak has refined the RockSport RED LT Shocks' compression and dampening to provide stable, yet compliant manners for daily driving and also in situations where Long Travel articulation is needed to keep the tires planted on the ground. (Learn More About RockSport RED Shocks Front / Rear)
RockSport RED Front LT Shock Length:- Extended Length: 28.5"
- Collapsed Length: 17.1"
- Extended Length: 28.0"
- Collapsed Length: 16.8"
The RockSport Black Shock
The RockSport Remote Reservoir Black shocks are specifically made to work with MetalCloak True Dual Rate Coils; the Digressive valving provides the best of slow and fast speed performance.
Shocks are made with 2.5" diameter, 3/16" thick-wall aluminum with a huge interior for fluid to ensure they stay cool and hold up to on- and off-road abuse.
RockSport Black Front Shock Length:- Extended Length: 30.7"
- Collapsed Length: 18.4"
- Extended Length: 30.8"
- Collapsed Length: 18.5"


Eight Settings Compression Adjustment
Large, easy-to-grip billet knob with laser-marked numbers allows you to change the compression setting simply; choose from 8 settings that add an additional 15% compression force at each click to tune in your Gold Standard. Dial in your off-road comfort along with great daily driving performance.
Braided Hydraulic Hose
The remote reservoir connects to the shock with a high-pressure, polymer overlaid, stainless-steel braided, reinforced, Teflon inner core, hydraulic hose, with optimized flow orifices to allow unhindered shock oil flow.


Inner Recessed Cap
Our completed package allows for maximum shaft length to be utilized and provides more travel than any similar size monotube shock; even the internals of the end caps are machined out for additional travel. A removable bump cap protects the seal assembly from full compression damage and provides access for servicing the shock.
TECHNICAL SPECIFICATIONS
| Items | Details |
|---|---|
| Compatibility | 2007-2018 JK Wrangler & Wrangler Unlimited |
| Long Arm Control Arms | 2.0" x .25" DOM Steel Tubing
1.5" x 9/32" DOM Steel Tubing 1.5" x .1875" DOM Steel Tubing |
| Rear Long Arm Bracket | 1/4" Hot-Rolled Steel |
| Duroflex Joint | Proprietary Vulcanized Elastomer Made With DuPont™ Kevlar® Fiber |
| Coils | High Tensile Chrome Steel |
| Track Bar | 4130 Solid Chromoly |
| Durotrak Bushing | Proprietary Vulcanized Elastomer |
| Track Bar Bracket | 3/16" Hot-Rolled Steel |
| Shock Mounts | 3/16" Hot-Rolled Steel |
| Drag Link | 1.375" OD x .375" Wall DOM |
| Drag Link Ends | Serviceable |
| Drag Link Length | 40-1/4" |
| Flip Bracket | 3/16" Hot-Rolled Steel |
| Rear Coil Correction Bracket | 3/16" Hot-Rolled Steel |
| Coil Isolators | Thermoset Elastomer |
| Front & Rear Adjustable Bump Stops | Thermoset Elastomer |
| Brake Lines | Braided Stainless Hose |
| Coating | Gold Zinc |
IMPORTANT NOTES
Exhaust Modification: All 2012+ JK Wranglers will require either exhaust spacers or a driveshaft. Please see the "What's This?" link on the front driveshaft clearance option.
Warranty: 6Pak Shocks are not shipped outside of North America. If you are outside of the USA or Canada and order 6Pak shocks or any kit with 6Pak shocks, you are waiving the rights to the lifetime customer service and manufacturer's warranty.
Exhaust Loop: This suspension requires an Exhaust Loop Bypass Pipe on 2012+ JK Wranglers.
Shock Options: MetalCloak engineers have chosen shocks that have been proven to have the ideal synergy with our systems. We have not tested other shocks on the market as to whether or not they complement our Game-Changer system or suppress its performance.
Driveshafts: Due to the long travel MetalCloak suspensions provide, factory driveshafts will contact OEM components and wear quickly at the extremes of articulation. Aftermarket front and rear driveshafts are required.
True Dual Rate Coils: MetalCloak does not recommend powder coating your True Dual Rate Coils. See instructions for additional details.
Suspension Alignment: We recommend you have a suspension specialist align your Jeep once a MetalCloak suspension is installed.
System Customization: This item is being offered as a complete system that contains all the components shown. We cannot customize, replace or remove a component from the kit. If you need a custom order, all components are available individually and our sales team is happy to help you place your order.
System Components: If you purchase this system and decide you do not need a component or part of the system, we cannot accept returns.
INSTALLATION
| Difficulty | Difficult |
| Body Modification | Cutting & Welding |
| Time to Install | 24 Hours |
Fitment & Specifications
| Brand | Metal Cloak |
|---|---|
| Product Type | Suspension Kits |
| Vehicle Fitment | Jeep Wrangler JK |
| Base Kit Number | A1655 |

$5,765.00