Metal Cloak JL Wrangler | JT Gladiator HD RockSport Steering System, Non-Rubicon Edition
Couldn't load pickup availability
Want it installed?
Our techs can fit it at the shop in Vancouver, WA. Book an install or call (360) 440-6375.
Shop safely
Secure your shopping experience with various safe and trusted payment methods.
THIS IS FOR THE NON-RUBICON EDITION ONLY!
The Heavy Duty RockSport RED Steering System for the JL Wrangler & JT Gladiator is stylish strength for your Jeep's vulnerable and all important steering system.
Features Include:
- Tubular 1.625" OD .375" Wall Chromoly Tie Rod
- Drag Link
- Gold Zinc Chromate Finish
- 1-Ton Forged Heat-Treated Dog-Leg Rod Ends
- Rod End Design Controls Tie Rod Flop
- OE Taper Pin and Lock Nut For Exact Fitment
- Sealed With Durable Rubber Grease Boots
- Adjustable While Installed
- Specifically Tuned RockSport Stabilizer/Damper
- Black Anodized Billet Aluminum Tie Rod Mount
The high-clearance bends of the strong 1.375" OD drag link tubing are engineered for up and down travel providing the needed space for aftermarket axles and differential covers and are coated with gold zinc chromate for a long-lasting finish. Factory-like fitment with OE taper pin and lock nut are found with the dual 1-ton forged and heat-treated rod ends, which have extra strength right where it is needed and are designed to control directional misalignment to prevent drag link flop. Sealed with durable rubber grease boots, the ends are simple to service via zerk fittings.
The assembly is easily adjusted while mounted on the vehicle for fine-tuning of axle placement.
The heavy duty 3/16" axle side steering stabilizer mount bracket installs into factory locations and re-positions the stabilizer up and out of harm's way. The RockSport steering stabilizer/damper has increased compression and extension damping performance over the original equipment and is tuned specifically for the JL Wrangler & JT Gladiator.
The tie rod mount is a two-piece aluminum billet design, is simple to install, and allows you to position the stabilizer for maximum performance. Finished in anodized black with a laser-engraved "M" around the recessed bolt holes for a clean and custom look.
The improved performance of this system will assist in the overall improvement of ride and control of your Jeep.
Note: The RockSport steering stabilizer kit works with left-hand drive applications only.
Note: Raised steering stabilizer requires at least 2" of bump stop to clear frame.
Note: Does NOT work with stock wheel backspacing.
Note: MetalCloak highly recommends using anti-seize on all billet tie rod mount bolts.
VIDEOS
MetalCloak's Jeep JL Wrangler & JT Gladiator Suspension
MetalCloak Heavy Duty Steering System
MetalCloak's Heavy Duty Steering System is built strong to handle the extra stresses of a modified Jeep while improving steering control.
What is Corner Travel Index?
Since 2014 MetalCloak has tested thousands and thousands of rigs at events all across the country collecting specs on the build and cataloging the results. The data collected allows us to make our own products better.
FMVSS 126 Compliant
MetalCloak not only has the best off-road flex, but we are also Federal Motor Vehicle Safety Standard 126 certified and compliant. No other company can match our on- and off-road performance.
Why Gold Zinc?
It's time for The MetalCloak Minute... where we answer frequently asked questions in about a minute. Today's topic: Gold Zinc.
THE TECH
Chromoly Steel For Added Strength
Making a tie rod is easy, but we don't do easy; we chose Normalized 4130 Chromoly 1.625" OD .375" wall tube that can take a beating without breaking (97,200 pounds per square inch).
Dog-Leg Tie Rod Ends
Anti-Flop Feature - Precision range of movement
Massive 1-Ton Rod Ends - Provides additional strength
Maximum Tire/Wheel Clearance - Correct steering radius
Oversized 1" Threads - More material at critical area

Oversized, Forged, & Heat-Treated Housing - Exclusive
Anti-Flop Feature

This specially designed rod end has been engineered just for the JL Wrangler & JT Gladiator steering.
Full side-to-side range of motion ensures bind-free steering when pushing the extremes of your Jeep's travel and articulation, while a limited "front to back" range of movement is built into the rod end and eliminates the possibility of the offset to allow the tie rod to "flop".
Drag Link With Greasable 1-Ton Ends
High misalignment rod ends, double adjustable, 1.375" OD DOM, and clears aftermarket diff covers.
Dog-Leg Drag Link Ends
Anti-Flop Feature - Precision range of movement
Massive 1-Ton Rod Ends - Provides additional strength
JL Specific OE Bolt Taper - Secure mount

Anti-Flop Feature

This specially designed rod end has been engineered just for the JL Wrangler & JT Gladiator steering.
Full side-to-side range of motion ensures bind-free steering when pushing the extremes of your Jeep's travel and articulation, while a limited "front to back" range of movement is built into the rod end and eliminates the possibility of the offset to allow the rod end to "flop".
Axle Side Steering Stabilizer Mount
The MetalCloak Steering Stabilizer, Axle Side Mount relocates the axle side of the steering stabilizer to better protect the steering stabilizer from debris by moving the stabilizer up and out of harm's way from where the factory steering stabilizer is mounted. Simple to install using existing factory holes for a bolt-on application. The steering stabilizer axle side mount requires a minimum 2" lift.

RockSport Steering Stabilizer

The RockSport RED JL Steering Stabilizer replaces the factory stabilizer and relocates the specifically tuned RockSport damper up and out of harm's way with replacement bolt-on brackets.
RockSport Stabilizer Length:
- Extended Length: 19.75"
- Collapsed Length: 12.25"
Billet Tie Rod Mount
The MetalCloak Billet Steering Stabilizer Tie Rod Mount is designed for the MetalCloak JK Wrangler, JL Wrangler & JT Gladiator Tie Rod. The billet clamp is fitted for 1.625" outer diameter.
- CNC Aluminum Billet
- Two-Piece Design
- Recessed Bolt Locations
- Laser-Engraved "M" Logo
- Black Anodized Finish

What's in the Kit?
- Tie Rod
- Dog-Leg Tie Rod Ends
- Drag Link
- Drag Link Anti-Flop Rod Ends
- Billet Tie Rod Mount
- Axle Mount
- RockSport Steering Stabilizer
- All Required Hardware
TECHNICAL SPECIFICATIONS
| Items | Details |
|---|---|
| Compatibility | 2018+ JL Wrangler Non-Rubicon & 2020+ JT Gladiator Non-Rubicon (Minimum 2" Lift Required) |
| Tie Rod | 1.625" OD .375" Wall 4130 CDS |
| Tie Rod Mount | 2" x 3" 6061-T6 Aluminum Black Anodized |
| Tie Rod Length | 59-5/16" |
| Drag Link | 1.375" OD x .375" Wall DOM |
| Drag Link Ends | Serviceable |
| Drag Link Length | 41" |
| Stabilizer Mount | 3/16" Hot-Rolled Steel Plate |
| Stabilizer Valving | 9-Stage Coil Spring |
| Stabilizer Piston Rod | 14mm (stronger than stock) |
| Stabilizer Elastomer Dust Boot | Protects from stone damage |
| Stabilizer Piston & Bore | 35mm (increased oil volume) |
| Stabilizer Tube Design | Twin Tube (Protects internals against stone damage) |
| Stabilizer Lip Seal | Multiple Seal (prevents oil loss) |
| Coating | Gold Zinc |
IMPORTANT NOTES
Requirements: Minimum 2" lift required.
Backspacing: Does NOT work with stock wheel backspacing.
Left-Hand Drive: The RockSport steering stabilizer kit works with left-hand drive applications only.
Clearance: Raised steering stabilizer requires at least 2" of bump stop to clear frame.
Billet Mount: MetalCloak highly recommends using anti-seize on all billet tie rod mount bolts.
INSTALLATION
| Difficulty | Easy |
| Body Modification | None |
| Time to Install | 1 Hour |
Fitment & Specifications
| Brand | Metal Cloak |
|---|---|
| Product Type | Shocks & Shock Mounts |
| Vehicle Fitment | Jeep Wrangler JL, Jeep Gladiator JT |
| Part Number | 7668 |

$987.00