Metal Cloak Jeep JT Gladiator 2.5" True Dual Rate Lift Kit
Couldn't load pickup availability
Want it installed?
Our techs can fit it at the shop in Vancouver, WA. Book an install or call (360) 440-6375.
Shop safely
Secure your shopping experience with various safe and trusted payment methods.
A perfect kit so you can enjoy your lifted Jeep Truck now and build for the future. Whether overlanding or daily driving, this is a mid-lift height for mild off-road use, made with top-level parts. Featuring patented technology available nowhere else.
Add to Your Kit
JT Front Driveshaft Clearance?
- I Have An Aftermarket Front JT Driveshaft (no added parts)
- “I am a JT Expert”, no Drive Shaft (no added parts)
- I Need A New JT Driveshaft (Metal Cloak JK/JL Front Driveshaft, Auto Transmission)
Features Include:
- Fits Jeep JT Gladiator (Excludes Mojave)
- Duroflex™ Joints Enhanced With Kevlar®
- True Dual Rate™ Coils
- Front Coil Isolators
- Durotrak™ Equipped Track Bars
- Height-Adjustable Bump Stops
- Specifically Tuned Shocks for True Dual Rate Coils
- Designed for Maximum Up and Down Travel
- All Required Hardware
- Made In The USA
True Dual Rate™ Coils provide the most comfortable and stable ride over traditional single rate lift springs, and provide better load handling than the typical "progressive/multi-rate" coils. Our True Dual Rate coils are extra long in free-length to maintain contact for extreme articulation. MetalCloak has over a decade of proven dual-rate coil performance.
The front true dual rate coils come with MetalCloak's Front Lower Coil Correction Pads. This polymer isolator replaces the OEM plastic part and corrects the coil bow that may be caused when using the worn parts. Fits in factory location and is a quick upgrade to fine tune your Jeep.
MetalCloak Thermoset Elastomer Coil Isolator upgrade pads are designed to last and outperform factory parts. The pads are made specifically for MetalCloak True Dual Rate Coils and are model specific.
The Durotrak bushings reduce NVH (noise, vibration and harshness) that can be transferred to the driver and provide a smoother ride while also improving the vehicle's steering input. The patented track bar bushings are a 2-part design that can rotate 360 degrees in a vertical plane unhindered while minimizing horizontal forces to keep the Jeep's axle centered and you going in the right direction.
We offer a choice in shocks; run the shock set-up you choose to fit your build needs. If you have a different idea of what shocks will work best for you - go for it. MetalCloak suspensions ARE designed to optimally be used with the patented MetalCloak tuned Shocks that provide maximum up and down travel. Our RockSport Shocks (Exclusively at MetalCloak) provide longer travel featured in a standard shock design and share the same valving as our premiere 6Paks; this is THE option if looking for great shocks at a fantastic price. The choice is yours to buy the suspension with or without shocks and then add whatever shock you choose.
Adjustable-height front and rear bump stops are a MetalCloak first and allow you to adjust the travel to be tailored to the size of tire you have optioned for. Add more bump stop or remove to adjust to the clearance you need without having to remove the coils.
This is an entry-level kit comprised of top-level parts -- a 3.5" lift kit that gives you added clearance for larger tires, unprecedented ride quality, at an affordable price, and allows you to build upon the kit if you ever desire to improve off-road performance with Game Changer components.
MetalCloak patented components have been proven safe with the FMVSS certificate of safety; testing was done while configured with 37-inch tires, full body armor and suspension lift.
Note: Does not fit a Mojave edition JT.
Note: Due to the long-travel MetalCloak suspensions provide, factory drive shafts will contact OEM components and wear quickly when at the extremes of articulation. An aftermarket driveshaft will be needed. (Front Auto Transmission Drive Shaft)
Note: MetalCloak engineers have chosen shocks that have been proven to have the ideal synergy with our systems. We have not tested other shocks on the market as to whether they complement our Game-Changer system or suppress its performance.
Note: MetalCloak does not recommend powder coating your True Dual Rate Coils. See instructions for additional details.
Note: MetalCloak Recommends You Have a Suspension Specialist Align Your Jeep Once a MetalCloak Suspension is Installed.
Note: This item is being offered as a complete system that contains all the components shown. We cannot customize, replace or remove a component from the kit. If you need a custom order, all components are available individually and our sales team is happy to help you place your order.
Note: If you purchase this system, and decide you do not need a component or part of the system, we cannot accept returns.
Note: RockSport Black Shocks are LARGE BODIED 2.5" diameter long-travel shocks. Specific brackets are provided for mounting, dependent on axle type i.e.: (wide track axle) Rubicon/Max Tow or (standard axle width) Sport Model. Correct wheel backspacing IS required.
VIDEOS
MetalCloak's JT Gladiator Suspension is the proven leader among production suspension systems.
MetalCloak True Dual Rate Coils vs Rock Krawler, Teraflex & Skyjacker
We take a deep dive into coil spring performance in this side-by-side comparison of MetalCloak's True Dual Rate coils against Rock Krawler, Teraflex, and Skyjacker options.
RockSport Black vs Other Shock Comparison
We put the RockSport Black Shock to the test against other leading shock competitors. Using a dyno machine, we measured performance across multiple settings and tested shaft hardness and size to see how they hold up.
Disassembling a MetalCloak RockSport Black Shock
Take a deep dive into the MetalCloak RockSport Black Shock. Watch as we fully disassemble the shock and break down everything that makes it a top performer on and off the trail.
Duroflex 101
This short video covers what you need to know about the basics of the Duroflex Joint. How it should be used and what to expect when using it.
Duroflex Joint Maintenance
It's time for The MetalCloak Minute... where we answer frequently asked questions in about a minute. Today's topic: Joint Maintenance.
Duroflex Joint Revealed
The MetalCloak Duroflex Joint gives better dampening properties over OEM style rubber Clevite Joints and provides more misalignment than "other" inferior Flex Joints.
Vibration Dampening
We tested our Duroflex Joint using a "Shaker Table" and seismometer app to show how much vibration dampening the Duroflex Joint gives you compared to other industry-leading joints.
A Comparison of Flex
Comparing the Flex of the Duroflex Joint with that of the Johnny Joint, the Teraflex Monster and the typical Clevite.
True Dual Rate Centered Coils 101
This short video covers all you need to know about MetalCloak's True Dual Rate Centered Coils.
Durotrak™ Bushing
Eliminate squeaks and clunks in your steering with the technology of MetalCloak's Durotrak™ bushings; exclusively found in MetalCloak track bars.
What is Corner Travel Index?
Since 2014 MetalCloak has tested thousands and thousands of rigs at events all across the country collecting specs on the build and cataloging the results. The data collected allows us to make our own products better.
FMVSS 126 Compliant
MetalCloak not only has the best off road flex, but we are also Federal Motor Vehicle Safety Standard 126 certified and compliant. No other company can match our on- and off-road performance.
Why Gold Zinc?
It's time for The MetalCloak Minute... where we answer frequently asked questions in about a minute. Today's topic: Gold Zinc.
THE TECH
What's in the Kit?
- Upper Front Duroflex Control Arms
- Front & Rear True Dual Rate™ Coils
- Lower Front Coil Isolator Pads
- Motor Specific Front Coil Isolators
- Front & Rear Durotrak™ Track Bars
- Front & Rear Adjustable Bump Stops
- Front & Rear Sway Bar Links
- Rear Brake Lines
- Shock Mounts

If You Choose...
- No Shocks - No Shock Mounts, No Shocks
- Choose My Own - Get Outboard Shock Mounts, No Shocks
- Use Stock Shocks - Get Outboard Shock Mounts, Rear Shock Mounts, No Shocks
- Fox Shocks - Get Fox Shocks & Outboard Shock Mounts
- RockSport Red Shocks - Get RockSport Shocks & Outboard Mounts
- RockSport Black Shocks - Get RockSport Shocks & Outboard Mounts
IT ALL STARTS WITH THE BUSHINGS
The Patented Duroflex™ Joint (metalcloakpatents.com) is the key to getting the greatest flex in a bolt-on suspension kit. Period.
MetalCloak has taken the best features of the most widely used control arm joints and combined those features to create the Duroflex Joint, producing a Low-Maintenance, High-Misalignment (34°), Self-Centering, Rebuildable Joint with an OEM quality ride.
Now With Kevlar!

DuPont™ Kevlar® Fiber is now compounded in the proprietary elastomer of the Duroflex Bushing, bringing even more strength, durability and performance.
Kevlar® is a synthetic fiber with an extremely high tensile strength-to-weight ratio… five times stronger than steel and commonly used in bulletproof armor applications.
Duroflex Bushings w/Kevlar® can be identified by the MetalCloak "M" located on the outer surface.
Control Arm Duroflex Joint Alignment...
At MetalCloak we take the care to build every product right.
Most manufacturers build their control arms misaligned from center. Why? It simply costs less to do so.
By not cutting any corners, our joints are Centered and Aligned reducing wear and improving performance.
It makes them easier to install, too!

Threaded Forged Ends

Forged for Strength...
The adjustable threaded ends are forged, providing a 37% higher fatigue strength over inferior cast parts; this EXTRA rock bashing strength will hold up to whatever you throw at 'em.
Control Arm Specs
JT Gladiator Upper Front (SKU #7602)
- CNC Machined
- 3/16" Wall DOM Steel
- 1.25" OD
- 3/16" Steel Clevis
- Precision Locking Nut
- Gold Zinc Plated
- Threaded Forged Ends
- Duroflex Joint
Degrees of Articulation
MetalCloak's Duroflex Joint provides 28° more articulation and flex than typical control arms!
What are True Dual Rate Coils?
MetalCloak True Dual Rate™ Coils have one of the longest free lengths in the industry for greater articulation without sacrificing the OEM ride quality.
Without the advantage of the Dual Rate Design, the required Spring Rate would be too low and "squishy" , just loading your Jeep up with supplies would affect ride height and quality.
Lower Front Coil Isolator Correction Pads
Replace the plastic OE factory coil isolator pads that are problematic and cause coil bow. This polymer isolator replaces the OEM plastic part and corrects the coil bow that may be caused when using the worn parts. Fits in factory location and is a quick upgrade to fine tune your JT Gladiator.

Coil Isolators

MetalCloak Thermoset Elastomer Coil Isolator upgrade pads are designed to last and outperform factory parts. The pads are made specifically for MetalCloak True Dual Rate Coils and are model specific.
Not just any track bar bushing...meet the Patented Durotrak
The Patented Durotrak™ Bushing (metalcloakpatents.com) is an NVH (noise, vibration, harshness) bushing made with a proprietary elastomer compound unique to MetalCloak. The Durotrak™ two-part bushing is comprised of two pieces that thread together making this bushing simple to install without a press, reduces vibration and harshness transferred to the driver, and improves vehicle steering input.

Forged End

The adjustable threaded ends are forged, providing a 37% higher fatigue strength over inferior cast parts; this EXTRA rock bashing strength will hold up to whatever you throw at 'em.
Solid Chromoly front track bar keeps you... well.. on track
Formed for ultimate Up-Travel & Down-Travel, the Front Track Bar gives unprecedented strength, clearance, and improved ride stability.
Stop The Guesswork. Bump It Up!
MetalCloak Adjustable Bump Stop System...
- Adjust from 1" - 4" Without Removing Coils
- Perfect Height Regardless of Tire Size
- Thermoset Elastomer Dampens Impact
- Additional Pads Available on Request
(Learn More About Front Adjustable Bump Stops)

Rear Adjustable Bump Stops!

Manufactured from trail-proven natural thermoset elastomer, each puck is designed to work universally with your JT Gladiator.
Designed specifically for the JT Gladiator, the system comes with 4 rectangular pucks, allowing for easy adjustment between 1" - 4". (Learn More About Rear Adjustable Bump Stops)
Outboard Shock Mount
MetalCloak Jeep JT Outboard Front Lower Shock Mount Spacer Kit:
- Engineered to move the lower shock mounts away from the Jeep frame rails increasing clearance for the shock body at the extremes of articulation.
- All Grade 8 hardware provided.
- Treated with Gold Zinc Chromate for the ultimate in defense against the elements.
- Manufactured from laser-cut 3/16" steel and CNC bent for superior strength and exact fitment.
Bracket rotates shock eyelet; allows it to swing with the axle vs bind on the limited elastomer material. The Outboard Front Lower Shock Mount Spacer comes in the NO Shock and RockSport Shock Kits only. The 6Pak Shocks do not require the outboard shock mount. (Learn More About The Outboard Shock Mount)
Important Note: If using OE wheels, 2" spacers will be needed to give proper clearance. These mounts are intended for use for wheels with 4.5" of backspacing or less or an equivalent of a 2" spacer on factory wheels.

Choose Your Shocks
The RockSport RED Shock

It's not just a shock, it is a piece in a tuned system. This is not a typical bolt-on shock. RockSport RED shocks are valved and specifically tuned to work with MetalCloak True Dual-Rate Coils.
MetalCloak has refined the RockSport RED Shocks' compression and dampening to provide stable, yet compliant manners for daily driving and also in situations where Long Travel articulation is needed to keep the tires planted on the ground.
RockSport RED Front Shock Length:
- Extended Length: 30.0"
- Collapsed Length: 17.7"
RockSport RED Rear Shock Length:
- Extended Length: 28.0"
- Collapsed Length: 16.8"
The RockSport Black Shock
The RockSport Remote Reservoir Black shocks are specifically made to work with MetalCloak True Dual-Rate Coils; the digressive valving provides the best of slow and fast speed performance.
Shocks are made with 2.5" diameter, 3/16" thick wall aluminum with a huge interior for fluid to ensure they stay cool and hold up to on and off-road abuse.
RockSport Black Front Shock Length:
- Extended Length: 28.5"
- Collapsed Length: 17.2"
RockSport Black Rear Shock Length:
- Extended Length: 28.5"
- Collapsed Length: 17.2"

Outboard Stand-Off Mounts

Shock attaches with built-in offset mounts that allow for long travel capabilities with the convenience of an OE-like fitment.
Braided Hydraulic Hose
The remote reservoir connects to the shock with a high-pressure, polymer overlaid, stainless-steel braided, reinforced, Teflon inner core, hydraulic hose, with optimized flow orifices to allow unhindered shock oil flow.

Eight Settings Compression Adjustment

Large, easy-to-grip billet knob with laser-marked numbers allows you to change the compression setting simply; choose from 8 settings that add an additional 15% compression force at each click to tune in your Gold Standard. Dial in your off-road comfort along with great daily driving performance.
Note: The Eight Setting Compression Adjustment is ONLY on the RockSport Black Adjustable Reservoir Shocks.
TECHNICAL SPECIFICATIONS
| Items | Details |
|---|---|
| Compatibility | 2020+ JT Gladiator |
| Control Arms | 1-1/2" x .187 DOM Steel Tubing |
| Duroflex Joint | Proprietary Vulcanized Elastomer made with DuPont™ Kevlar® fiber |
| True Dual Rate Coils | High Tensile Chrome Steel |
| Track Bar | 4130 Solid Chromoly |
| Durotrak Bushing | Proprietary Vulcanized Elastomer |
| Front Adjustable Bump Stops | Thermoset Elastomer |
| Rear Adjustable Bump Stops | Thermoset Elastomer |
| Steel Coating | Gold Zinc |
IMPORTANT NOTES
Fitment: Does not fit a Mojave Edition JT Gladiator.
Driveshaft: Due to the long-travel MetalCloak suspensions provide, factory drive shafts will contact OEM components and wear quickly when at the extremes of articulation. An aftermarket driveshaft will be needed. (Front Auto Transmission Drive Shaft)
Shock Options: MetalCloak engineers have chosen shocks that have been proven to have the ideal synergy with our systems. We have not tested other shocks on the market as to whether or not they complement our Game-Changer system or suppress its performance.
True Dual Rate Coils: MetalCloak does not recommend powder coating your True Dual Rate Coils. See instructions for additional details.
Suspension Alignment: We recommend you have a suspension specialist align your Jeep once a MetalCloak suspension is installed.
System Customization: This item is being offered as a complete system that contains all the components shown. We cannot customize, replace or remove a component from the kit. If you need a custom order, all components are available individually and our sales team is happy to help you place your order.
System Components: If you purchase this system, and decide you do not need a component or part of the system, we cannot accept returns.
RockSport Black: RockSport Black Shocks are LARGE BODIED 2.5" diameter long-travel shocks. Specific brackets are provided for mounting, dependent on axle type i.e.: (wide track axle) Rubicon/Max Tow or (standard axle width) Sport Model. Correct wheel backspacing IS required.
INSTALLATION
| Installation Difficulty | Moderate |
| Body Modification | None |
| Time to Install | 3-5 Hours |
Fitment & Specifications
| Brand | Metal Cloak |
|---|---|
| Product Type | Suspension Kits |
| Vehicle Fitment | Jeep Gladiator JT |
| Base Kit Number | A3130 |

$2,217.00