Metal Cloak Jeep JL Wrangler 4xE 3.5" True Dual Rate Lift Kit

Skip to product information
1 of 12
Shock Package
Model & Wheel Backspacing
Regular price $1,974.00
Sale price $1,974.00 Regular price
Shipping calculated at checkout.

Want it installed?

Our techs can fit it at the shop in Vancouver, WA. Book an install or call (360) 440-6375.

Awaiting stock, shipping soon

A perfect kit so you can enjoy your 4xE Jeep with a lift now, with opportunity to build on for the future. This is a mid-lift height for mild off-road use, made with top-level parts. It features patented technology available nowhere else.

Add to Your Kit

JL Front Driveshaft Clearance?

Rear Track Bar Relocation Bracket

Features Include:

  • Fits 2021+ JL Wrangler 4xE
  • Duroflex™ Joints Enhanced with Kevlar
  • True Dual Rate™ Coils
  • Front Coil Isolators
  • Durotrak-Equipped Front Track Bar
  • Specifically Tuned Shocks for True Dual Rate™ Coils
  • Height-Adjustable Bump Stops
The MetalCloak Game-Changing Duroflex™ Joints are the only vulcanized elastomer, self-centering joint enhanced with DuPont™ Kevlar® fiber – providing incredible durability with more misalignment in the control arms and better vibration damping than anything else available. Exclusive to MetalCloak (see detailed info in the main body).

MetalCloak True Dual Rate™ Coils provide the most comfortable and stable ride over traditional single rate lift springs, and provide better load handling than the typical "progressive/multi-rate" coils. Our True Dual Rate coils are extra long in free length to maintain contact for extreme articulation. MetalCloak has over a decade of proven dual rate coil performance.

The front True Dual Rate coils come with MetalCloak's Front Lower Coil Correction Pads. This polymer isolator replaces the OEM plastic part and corrects the coil bow that may be caused by worn factory parts. It fits in the factory location and is a quick upgrade to fine-tune your Jeep.

MetalCloak Thermoset Elastomer Coil Isolator upgrade pads are designed to last and outperform factory parts. The pads are made specifically for MetalCloak True Dual Rate Coils and are model specific.

The Durotrak bushings reduce NVH (noise, vibration and harshness) that can be transferred to the driver and provide a smoother ride while also improving the vehicle's steering input. The patented track bar bushings are a 2-part design that can rotate 360 degrees in a vertical plane unhindered while minimizing horizontal forces to keep the Jeep's axle centered and you going in the right direction.

We offer a choice in shocks; run the shock setup you choose to fit your build needs. If you have a different idea of what shocks will work best for you, go for it. MetalCloak suspensions ARE designed to optimally be used with the patented MetalCloak tuned shocks that provide maximum up and down travel. Our RockSport Shocks (Exclusively at MetalCloak) provide longer travel featured in a standard shock design and share the same valving as our premier 6Paks; this is THE option if you're looking for great shocks at a fantastic price. The choice is yours to buy the suspension with or without shocks and then add whatever shock you choose.

Adjustable-height front and rear bump stops are a MetalCloak first and allow you to tailor the travel to the size of tire you have chosen. Add or remove bump stop to adjust to the clearance you need without having to remove the coils.

This is an entry-level kit made of top-level parts -- a 3.5" lift kit that gives you added clearance for larger tires and unprecedented ride quality at an affordable price, and allows you to build upon the kit if you ever desire to improve off-road performance with Game-Changer components.

MetalCloak patented components have been proven safe with the FMVSS certificate of safety; test done while configured with 37" tires, full body armor and suspension lift.

Note: DRIVESHAFT WARNING Due to the long travel MetalCloak suspensions provide, factory driveshafts will not work. An aftermarket driveshaft will be required. Talk to your MetalCloak Sales Representative for driveshaft dimensions.

Note: If using stock wheels, you must have a 1.75" wheel spacer. If using aftermarket wheels, the backspacing required is a maximum of 4.75".

Note: MetalCloak engineers have chosen shocks that have been proven to have the ideal synergy with our systems. We have not tested other shocks on the market as to whether they complement our Game-Changer system or suppress its performance.

Note: MetalCloak recommends you have a suspension specialist align your Jeep once a MetalCloak suspension is installed.

Note: MetalCloak does not recommend powder coating your True Dual Rate Coils. See instructions for additional details.

Note: This item is being offered as a complete system that contains all the components shown. We cannot customize, replace or remove a component from the kit. If you need a custom order, all components are available individually and our sales team is happy to help you place your order.

Note: If you purchase this system and decide you do not need a component or part of the system, we cannot accept returns.

Note: The stock wheel backspacing will not work with the 4xE Wrangler.



VIDEOS

MetalCloak's Jeep JL Wrangler Suspension is the proven leader among production suspension systems

MetalCloak True Dual Rate Coils vs Rock Krawler, Teraflex & Skyjacker

We take a deep dive into coil spring performance in this side-by-side comparison of MetalCloak's True Dual Rate coils against Rock Krawler, Teraflex, and Skyjacker options.

RockSport Black vs Other Shock Comparison

We put the RockSport Black Shock to the test against other leading shock competitors. Using a dyno machine, we measured performance across multiple settings and tested shaft hardness and size to see how they hold up.

Disassembling a MetalCloak RockSport Black Shock

Take a deep dive into the MetalCloak RockSport Black Shock. Watch as we fully disassemble the shock and break down everything that makes it a top performer on and off the trail.

Duroflex 101

This short video covers what you need to know about the basics of the Duroflex Joint. How it should be used and what to expect when using it.

Why Gold Zinc?

It's time for The MetalCloak Minute... where we answer frequently asked questions in about a minute. Today's topic: Gold Zinc.

Duroflex Joint Maintenance

It's time for The MetalCloak Minute... where we answer frequently asked questions in about a minute. Today's topic: Joint Maintenance.

Duroflex Joint Revealed

The MetalCloak Duroflex Joint gives better dampening properties over OEM style rubber Clevite Joints and provides more misalignment than "other" inferior Flex Joints.

Vibration Dampening

We tested our Duroflex Joint using a "Shaker Table" and seismometer app to show how much Vibration Dampening the Duroflex Joint gives you compared to other industry-leading joints.

A Comparison of Flex

Comparing the Flex of the Duroflex Joint with that of the Johnny Joint, the Teraflex Monster and the typical Clevite.

True Dual Rate Centered Coils 101

This short video covers all you need to know about MetalCloak's True Dual Rate Centered Coils.

Durotrak™ Bushing

Eliminate squeaks and clunks in your steering with the technology of MetalCloak's Durotrak™ bushings, exclusively found in MetalCloak track bars.

What is Corner Travel Index?

Since 2014, MetalCloak has tested thousands and thousands of rigs at events all across the country collecting specs on the build and cataloging the results. The data collected allows us to make our own products better.

FMVSS 126 Compliant

MetalCloak not only has the best off-road flex, but we are also Federal Motor Vehicle Safety Standard 126 certified and compliant. No other company can match our on- and off-road performance.

THE TECH

What's in the Kit?

Contents of the MetalCloak JL Wrangler 4xE 3.5" True Dual Rate Lift Kit, including upper front Duroflex control arms, True Dual Rate coils, coil isolators, Durotrak track bars, adjustable bump stops and sway bar links.
  • Upper Front Duroflex Control Arms
  • Front & Rear True Dual Rate™ Coils
  • Lower Front Coil Isolator Pads
  • Motor Specific Front Coil Isolators
  • Front & Rear Durotrak™ Track Bars
  • Front & Rear Adjustable Bump Stops
  • Front & Rear Sway Bar Links

If You Choose...

  • No Shocks - No Shock Mounts, No Shocks
  • Choose My Own - Get Outboard Shock Mounts, No Shocks
  • Use Stock Shocks - Get Outboard Shock Mounts, Rear Shock Mounts, No Shocks
  • Fox Shocks - Get Fox Shocks & Outboard Shock Mounts
  • RockSport Red Shocks - Get RockSport Red Shocks & Outboard Shock Mounts
  • RockSport Slate Shocks - Get RockSport Slate Shocks & Outboard Shock Mounts
  • RockSport Silver Shocks - Get RockSport Silver Shocks & Outboard Shock Mounts
  • RockSport Black Shocks - Get RockSport Black Shocks & Outboard Shock Mounts

IT ALL STARTS WITH THE BUSHINGS

The Patented Duroflex™ Joint (metalcloakpatents.com) is the key to getting the greatest flex in a bolt-on suspension kit. Period.

A graphical comparison of an OEM Clevite plus a typical Flex Joint equaling a MetalCloak Duroflex Joint.

MetalCloak has taken the best features of the most widely used control arm joints and combined those features to create the Duroflex Joint, producing a Low-Maintenance, High-Misalignment (34˚), Self-Centering, Rebuildable Joint with an OEM quality ride.

Now with Kevlar!

DuPont™ Kevlar® Fiber is now compounded in the proprietary elastomer of the Duroflex Bushing, bringing even more strength, durability and performance.

Kevlar® is a synthetic fiber with an extremely high tensile strength-to-weight ratio…five times stronger than steel and commonly used in bulletproof armor applications.

Duroflex Bushings w/Kevlar® can be identified by the MetalCloak "M" located on the outer surface.

Black Duroflex bushing enhanced with Kevlar, with a metal core.

Control Arm Duroflex Joint Alignment...

Comparison of three control arm joint alignments: MetalCloak centered OEM alignment, misaligned, and parallel offset.

At MetalCloak we take the care to build every product right.

Most manufacturers build their control arms misaligned from center. Why? It simply costs less to do so.

By not cutting any corners, our joints are Centered and Aligned reducing wear and improving performance.

It makes them easier to install, too!

Threaded Forged Ends

Forged for Strength...

The adjustable threaded ends are forged, providing a 37% higher fatigue strength over inferior cast parts; this EXTRA rock bashing strength will hold up to whatever you throw at 'em.

Close-up of a metallic forged end with threading and hexagonal nut, on a blurred background.

Control Arm Specs

JL Wrangler Upper Front (SKU #7602)

  • CNC Machined
  • 3/16" Wall DOM Steel
  • 1.25" OD
  • 3/16" Steel Clevis
  • Precision Locking Nut
  • Gold Zinc Plated
  • Duroflex Joint
  • Threaded Forged Ends
Technical diagram of the JL Wrangler upper front Duroflex control arm with dimensions and specifications.

Degrees of Articulation

MetalCloak's Duroflex Joint provides 28˚ more articulation and flex than typical control arms! (Learn More About Duroflex Upper Front Control Arms)


Illustration of a Dual Duroflex Control Arm with 68° maximum articulation and angular movement indicators. Diagram of a Clevis/Flex Joint Control Arm with 40° articulation range annotations.

What are True Dual Rate Coils?

MetalCloak JL Wrangler True Dual Rate™ Coils have one of the longest free lengths in the industry for greater articulation without sacrificing the OEM ride quality.

Without the advantage of the Dual Rate Design, the required Spring Rate would be too low and "squishy" -- just loading your Jeep up with supplies would affect ride height and quality. (Learn More About True Dual Rate Coils Front / Rear)

Diagram highlighting the suspension coil's dual flex rates: extended, compressed, and at ride height with transition point indicated.
Diagram of a front coil spring with specifications like height, wire diameter, and top/bottom coil diameters. Diagram of a rear coil spring with specifications like height, wire diameter, and top/bottom coil diameters.

Lower Front Coil Isolator Correction Pads

Two black circular lower front coil isolator pads with branding, placed on a white background.

Replace the plastic OE factory coil isolator pads that are problematic and cause coil bow. This polymer isolator replaces the OEM plastic part and corrects the coil bow that may be caused by worn factory parts. It fits in the factory location and is a quick upgrade to fine-tune your JL Wrangler.

Coil Isolators

MetalCloak Thermoset Elastomer Coil Isolator upgrade pads are designed to last and outperform factory parts. The pads are made specifically for MetalCloak True Dual Rate Coils and are model specific.

Two black circular coil isolator pads with branding, placed on a white background.

Not just any track bar bushing...meet the Patented Durotrak

An animation of a black elastomer bushing with a silver hub in two parts threading together, against a white background.

The Patented Durotrak™ Bushing (metalcloakpatents.com) is an NVH (noise, vibration, harshness) bushing made with a proprietary elastomer compound unique to MetalCloak. The Durotrak™ two-part bushing is comprised of two pieces that thread together making this bushing simple to install without a press, reduces vibration and harshness transferred to the driver, and improves vehicle steering input. (Learn More About Durotrak Track Bars Front / Rear)

Forged End

The adjustable threaded ends are forged, providing a 37% higher fatigue strength over inferior cast parts; this EXTRA rock bashing strength will hold up to whatever you throw at 'em.

Gold zinc forged end attached to the factory axle bracket.

Solid Chromoly front track bar keeps you... well... on track

Formed for ultimate Up-Travel & Down-Travel, the JL Wrangler Front Track Bar gives unprecedented strength, clearance, and improved ride stability.

Diagram showing Durotrak Track Bar Specifications with material details.

JL Wrangler Durotrak Rear Track Bar

Diagram showing Durotrak Track Bar Specifications with dimensions and fitment details.

Outboard Shock Mount

Pair of gold zinc brackets for mounting outboard shocks on a Jeep JL Wrangler.

Engineered to move the lower shock mounts away from the Jeep frame rails, increasing clearance for the shock body at the extremes of articulation. Bracket rotates shock eyelet; allows it to swing with the axle vs bind on the limited rubber material. (Learn More About The Outboard Shock Mount)

Important Note: If using OE wheels, 2" spacers will be needed to give proper clearance. These mounts are intended for use for wheels with 4.5" of backspacing or less or an equivalent of a 2" spacer on factory wheels.

Stop The Guesswork. Bump It Up!

MetalCloak Adjustable Bump Stop System...

  • Adjust from 1" - 4" Without Removing Coils
  • Perfect Height Regardless of Tire Size
  • Thermoset Elastomer Dampens Impact
  • Additional Pads Available on Request

(Learn More About Front Adjustable Bump Stops)

Two stacks of four black elastomer pucks with a large gold washer covering the top of the stack with three different length bolts for the different heights options on a white background.

Rear Adjustable Bump Stops!

A stack of black elastomer rectangle bump stops with circular indentations and silver screws on top.

Manufactured from trail-proven natural thermoset elastomer, each puck is designed to work universally with your JL Wrangler.

Designed specifically for the JL Wrangler, the system comes with 4 rectangular pucks, allowing for easy adjustment between 1" - 4". (Learn More About Rear Adjustable Bump Stops)

Choose Your Shocks

The RockSport RED Shock

It's not just a shock, it is a piece in a tuned system. This is not a typical bolt-on shock. RockSport RED shocks are valved and specifically tuned to work with MetalCloak True Dual Rate Coils. The RockSport Red shocks provide long travel and a softer ride.

MetalCloak has refined the RockSport RED Shocks' compression and dampening to provide stable, yet compliant manners for daily driving and also in situations where Long Travel articulation is needed to keep the tires planted on the ground. (Learn More About RockSport RED Shocks)

RockSport RED Front Shock Length:
  • Extended Length: 30.0"
  • Collapsed Length: 17.3"
RockSport RED Rear Shock Length:
  • Extended Length: 30.0"
  • Collapsed Length: 17.3"
A red and black shock extending and compressing, designed for optimal performance in tuned suspension systems and daily driving stability.
A grey and black shock extending and compressing, designed for optimal performance in tuned suspension systems and daily driving stability.

The RockSport Slate Shocks

The MetalCloak RockSport Slate Twin-Tube is not just a shock, it is a refined classic with a new look. Valved and specifically tuned to work with MetalCloak True Dual Rate Coils, these shocks provide a compliant, smooth, controlled ride.

RockSport Slate Shocks have been tuned perfectly for compression and dampening to provide stable, yet compliant manners for daily driving and also in situations where Long Travel articulation is needed to keep the tires planted on the ground. With the RockSport Slate Twin-Tube Shocks, you get an affordable, reliable upgrade that keeps your Jeep handling like it should.

The RockSport Slate shocks: Affordable long travel solution with a softer ride.

RockSport Slate Front Shock Length:
  • Extended Length: 30.7"
  • Collapsed Length: 17.3"
RockSport Slate Rear Shock Length:
  • Extended Length: 30.7"
  • Collapsed Length: 17.3"

Outboard Stand-Off Mounts

The RockSport Slate shocks include built-in outboard upper mounts. This design ensures proper alignment, better articulation, and maximum clearance for your suspension setup. The integration makes installation more straightforward while delivering a precise fit and optimized performance on the trail.

Grey cylinder showcasing built-in offset mounts for extended travel and a convenient OE-like fit.
Close-up view of a shock absorber with an oversized 18mm chrome shaft, featuring a labeled diagram highlighting the shaft.

Oversized Chrome Shaft

The RockSport Slate shocks are equipped with oversized 18mm chrome-plated shafts. The larger diameter provides greater resistance to bending or damage when the suspension is under extreme load, such as when navigating heavy rocks or sudden drops. The chrome finish reduces friction and wear, ensuring long service life and consistent performance in even the harshest conditions.

Double Welded Bushing Eyes

The double-welded bushing eyes add reinforcement, helping the shocks withstand the impacts that come with off-road driving. The result is a stronger, more dependable connection that holds up against years of use and abuse without failure. The shocks are equipped with natural rubber bushings that provide the ideal balance of strength and flexibility. These bushings help absorb vibration and road harshness while maintaining solid connection points, adding longevity to your entire system.

Close-up of a shock absorber end showing double welded bushing eyes, with a labeled diagram pointing to the reinforced bushing area.
A grey and black shock extending and compressing, designed for optimal performance in tuned suspension systems and daily driving stability.

The RockSport Silver 2.0 Shocks

The monotube construction of the RockSport Silver 2.0 provides consistent damping and superior heat dissipation compared to traditional twin-tube shocks. With a monotube design, the shock oil stays cooler, allowing it to maintain performance during long, demanding runs where heat can lead to shock fade.

The nitrogen charge in the shock helps prevent aeration and foaming of the hydraulic oil, a common cause of shock fade. By keeping the oil and gas separate, dampening remains consistent, even during extended runs over rough terrain. The RockSport Silver shocks provide a firmer and sportier feel.

RockSport Silver Front Shock Length:
  • Extended Length: 28.4"
  • Collapsed Length: 18.4"
RockSport Silver Rear Shock Length:
  • Extended Length: 30.6"
  • Collapsed Length: 19.4"

Outboard Stand-Off Mounts

The RockSport Silver 2.0 shocks include built-in outboard upper mounts. This design ensures proper alignment, better articulation, and maximum clearance for your suspension setup. The integration makes installation more straightforward while delivering a precise fit and optimized performance on the trail.

Grey cylinder showcasing built-in offset mounts for extended travel and a convenient OE-like fit.
Close-up view of a shock absorber with an oversized 18mm chrome shaft, featuring a labeled diagram highlighting the shaft.

Oversized Chrome Shaft

The RockSport Silver 2.0 shocks are equipped with oversized 18mm chrome-plated shafts. The larger diameter provides greater resistance to bending or damage when the suspension is under extreme load, such as when navigating heavy rocks or sudden drops. The chrome finish reduces friction and wear, ensuring long service life and consistent performance in even the harshest conditions.

Double Welded Bushing Eyes

The double-welded bushing eyes add reinforcement, helping the shocks withstand the impacts that come with off-road driving. The result is a stronger, more dependable connection that holds up against years of use and abuse without failure. The shocks are equipped with natural rubber bushings that provide the ideal balance of strength and flexibility. These bushings help absorb vibration and road harshness while maintaining solid connection points, adding longevity to your entire system.

Close-up of a shock absorber end showing double welded bushing eyes, with a labeled diagram pointing to the reinforced bushing area.
One black and gold RockSport Black shock, built for on- and off-road performance.

The RockSport Black Shock

The RockSport Remote Reservoir Black shocks are specifically made to work with MetalCloak True Dual Rate Coils; the Digressive valving provides the best of slow and fast speed performance.

Shocks are made with 2.5" diameter, 3/16" thick-wall aluminum with a huge interior for fluid to ensure they stay cool and hold up to on- and off-road abuse.

RockSport Black Front Shock Length:
  • Extended Length: 30.5"
  • Collapsed Length: 18.2"
RockSport Black Rear Shock Length:
  • Extended Length: 32.5"
  • Collapsed Length: 19.2"

Outboard Stand-Off Mounts

Shock attaches with built-in offset mounts that allow for long travel capabilities with the convenience of an OE-like fitment.

Black and gold RockSport Black shock with built-in offset stand-off mounts for extended travel and a convenient OE-like fit.
Close-up of a stainless-steel braided hydraulic hose, optimized for 3000psi shock oil flow.

Braided Hydraulic Hose

The remote reservoir connects to the shock with a high-pressure, polymer overlaid, stainless-steel braided, reinforced, Teflon inner core, hydraulic hose, with optimized flow orifices to allow unhindered shock oil flow.

Eight Settings Compression Adjustment

Large, easy-to-grip billet knob with laser-marked numbers allows you to change the compression setting simply; choose from 8 settings that add an additional 15% compression force at each click to tune in your Gold Standard. Dial in your off-road comfort along with great daily driving performance.

Note: The Eight Setting Compression Adjustment is ONLY on the RockSport Black Adjustable Reservoir Shocks.

Animation of the RockSport Black shock's billet compression adjustment knob with laser-marked numbers for eight settings.
One grey shock absorber with white branding on an isolated background.

The Fox Shock

  • Direct Bolt-On Replacement. Fox designed this shock to be a direct bolt-on replacement for your lifted JL.
  • Designed for use with our 3.5" to 5.5" suspension lift, the Fox Shocks feature an Internal Floating Piston monotube design.
Fox Shock Length:
  • Extended Length: 28.5"
  • Collapsed Length: 17.9"

Optional Rear Track Bar Mounting Bracket

  • CAD Formed 1/4" Hot Rolled Steel Plate
  • Easy Bolt-On Bracket (No Welding)
  • Designed for Massive Up-Travel & Down-Travel
  • No Frame Interference
  • Zinc Chromate Plate

The MetalCloak JL Rear Track Bar Bracket is designed for up-travel as well as down-travel and can be used with MetalCloak's adjustable Rear Durotrak Track Bar.

3D rendering of a gold zinced rear track bar bracket with branding, attached to the factory rear track bar bracket on the rear axle.

Bolt-On Bracket Is A Key Component

The rear relocation and clearance track bar bracket provides what it takes to allow the track bar to keep your axle centered properly under your Jeep.


Rear Durotrak track bar bracket made of CNC formed 1/4" steel for JL vehicles.

TECHNICAL SPECIFICATIONS



Items Details
Compatibility 2021+ JL Wrangler 4xE
Control Arms 1.25" x .1875" DOM Steel Tubing
Duroflex Joint Proprietary Vulcanized Elastomer Made With DuPont™ Kevlar® Fiber
True Dual Rate Coils High-Tensile Chrome-Silicon Steel
Coil Isolators Thermoset Elastomer
Front & Rear Track Bar 4130 Solid Chromoly
Durotrak Bushing Proprietary Vulcanized Elastomer
Front & Rear Adjustable Bump Stops Thermoset Elastomer
Coating Gold Zinc


IMPORTANT NOTES



Driveshaft: DRIVESHAFT WARNING Due to the long travel MetalCloak suspensions provide, factory driveshafts will not work. An aftermarket driveshaft will be required. Talk to your MetalCloak Sales Representative for driveshaft dimensions.

Backspacing: The stock wheel backspacing will not work with the 4xE Wrangler.

Wheel Requirements: If using stock wheels, you must have a 1.75" wheel spacer. If using aftermarket wheels, the backspacing required is a maximum of 4.75".

Shock Options: MetalCloak engineers have chosen shocks that have been proven to have the ideal synergy with our systems. We have not tested other shocks on the market as to whether or not they complement our Game-Changer system or suppress its performance.

True Dual Rate Coils: MetalCloak does not recommend powder coating your True Dual Rate Coils. See instructions for additional details.

Suspension Alignment: We recommend you have a suspension specialist align your Jeep once a MetalCloak suspension is installed.

System Customization: This item is being offered as a complete system that contains all the components shown. We cannot customize, replace or remove a component from the kit. If you need a custom order, all components are available individually and our sales team is happy to help you place your order.

System Components: If you purchase this system and decide you do not need a component or part of the system, we cannot accept returns.

INSTALLATION



Difficulty Moderate
Body Modification None
Time to Install 6 - 8 Hours


Fitment & Specifications

Brand Metal Cloak
Product Type Suspension Kits
Vehicle Fitment Jeep Wrangler JL
Base Kit Number A6135
Metal Cloak Jeep JL Wrangler 4xE 3.5" True Dual Rate Lift Kit

$1,974.00

Questions about this part?
Call the shop.