Metal Cloak Adjustable Control Arm & Track Bar Kit | Toyota FJ Cruiser, 4Runner | Lexus GX460, 470
Couldn't load pickup availability
Want it installed?
Our techs can fit it at the shop in Vancouver, WA. Book an install or call (360) 440-6375.
Shop safely
Secure your shopping experience with various safe and trusted payment methods.
MetalCloak's Toyota Rear Control Arm Kit combines adjustable Duroflex™ rear upper and lower control arms with a Durotrak™ adjustable rear track bar to provide strength, articulation, and suspension geometry adjustment for your lifted vehicle.
Features Include:
- Fits Toyota FJ Cruiser, 4Runner, Lexus GX460 & GX470 Applications
- Duroflex™ Adjustable Rear Upper Control Arms
- Duroflex™ Adjustable Rear Lower Control Arms
- Durotrak™ Adjustable Rear Track Bar
- 1.25" OD x .187" Wall DOM Steel Upper Control Arms
- 1.625" OD x .25" Wall DOM Steel Lower Control Arms
- Solid 1.25" OD 4130 Chromoly Steel Track Bar
- Adjustable Length
- Precision Locking Nuts
- 1/8" Steel Dual Shoehorn Washers
- Protective Gold Zinc Finish
- All Required Hardware
- Made in the USA
The Duroflex™ Joints are housed in forged adjustable ends threaded into DOM steel tubing. The upper control arms use 1.25" OD x .187" wall tubing, while the lower control arms use 1.625" OD x .25" wall tubing. Adjustable length allows suspension geometry correction, and precision locking nuts secure the adjustment.
Included 1/8" steel dual shoehorn washers help guide the rear upper control arm joints into their mounting brackets for easier installation.
The Durotrak™ Adjustable Rear Track Bar features solid 1.25" OD 4130 chromoly steel construction and patented two-piece Durotrak™ bushings at both ends. Its adjustable length allows you to recenter the rear axle after lifting.
MetalCloak's signature gold zinc finish helps protect the control arms and track bar against corrosion and the elements.
MetalCloak suspension components have been tested for FMVSS 126 compliance in a vehicle configuration equipped with 37" tires, full body armor, and a suspension lift.
Compatibility: The Toyota Rear Control Arm Kit is compatible with 2007+ Toyota FJ Cruiser, 2003 - 2024 Toyota 4Runner, 2003 - 2009 Lexus GX470, and 2010+ Lexus GX460.
Vehicle Alignment: We recommend having a suspension specialist align your vehicle after installing a MetalCloak suspension.
Complete System: This item is offered as a complete system containing all components shown. We cannot customize, replace, or remove components from the kit. If you need a custom order, all components are available individually, and our sales team can help you place your order.
Returns: If you purchase this system and decide you do not need a component or part of the system, we cannot accept returns.
VIDEOS
MetalCloak's Toyota Suspension Components
Duroflex™ 101
Learn the basics of the Duroflex™ Joint, including how it works and what to expect from its performance.
Why Gold Zinc?
In this MetalCloak Minute, learn why we use gold zinc to protect suspension components against corrosion and the elements.
Duroflex™ Joint Maintenance
This MetalCloak Minute covers maintenance for your Duroflex™ Joints.
Duroflex™ Joint Revealed
Explore how the Duroflex™ Joint combines vibration damping with high misalignment for ride comfort and suspension articulation.
Vibration Damping
Watch a shaker-table comparison using a seismometer app to demonstrate how the Duroflex™ Joint damps vibration compared with other suspension joints.
A Comparison of Flex
Compare the articulation of the Duroflex™ Joint with the Johnny Joint, Teraflex Monster, and a typical Clevite joint.
Durotrak™ Bushing
Learn how MetalCloak's Durotrak™ bushings reduce noise, vibration, and harshness while allowing controlled suspension movement.
FMVSS 126 Compliant
Learn about MetalCloak's suspension testing for Federal Motor Vehicle Safety Standard 126 compliance.
THE TECH
It All Starts with the Bushings
The patented Duroflex™ Joint (metalcloakpatents.com) combines ride comfort with the articulation needed for a flexible bolt-on suspension system.
MetalCloak combines the features of widely used control arm joints in a low-maintenance, self-centering, rebuildable design with 34° of misalignment and an OEM-quality ride.
Reinforced with Kevlar®
DuPont™ Kevlar® fiber is compounded into MetalCloak's proprietary Duroflex™ elastomer for added strength and durability.
Duroflex™ Bushings containing Kevlar® can be identified by the MetalCloak “M” on the outer surface.
Threaded Forged Ends
Forged threaded ends provide strength for demanding off-road use while allowing control arm length adjustment. Precision locking nuts secure the adjustment.
Shoehorn Washers
The included 1/8" steel dual shoehorn washers help guide the rear upper control arm joints into their mounting brackets. MetalCloak's signature gold zinc finish helps protect the washers against corrosion.
Control Arm Specifications
Rear Lower Control Arms (SKU #7801)
- 1.625" OD x .25" Wall DOM Steel Tubing
- Threaded Forged Ends
- Adjustable Length
- Precision Locking Nuts
- Protective Gold Zinc Finish
- Duroflex™ Joints at Both Ends
Rear Upper Control Arms (SKU #7802)
- 1.25" OD x .187" Wall DOM Steel Tubing
- Threaded Forged Ends
- Adjustable Length
- Precision Locking Nuts
- Protective Gold Zinc Finish
- Duroflex™ Joints at Both Ends
Degrees of Articulation
The comparison below illustrates 68° of articulation for a control arm with Duroflex™ Joints at both ends, compared with 40° for the illustrated Clevite/flex joint combination.
Patented Durotrak™ Bushings
The patented Durotrak™ Bushing (metalcloakpatents.com) uses MetalCloak's proprietary elastomer compound to reduce noise, vibration, and harshness (NVH).
Its two-piece design threads together for installation without a press. Durotrak™ bushings at both ends of the track bar help reduce vibration and harshness while allowing controlled suspension movement.
Solid Chromoly Strength
Toyota Durotrak™ Adjustable Rear Track Bar Specifications
The specifications shown are starting points. Track bar adjustment varies by vehicle and suspension setup. MetalCloak recommends having a suspension specialist determine the correct track bar length for your vehicle.
What's in the Kit?
- Duroflex™ Adjustable Rear Lower Control Arms
- Duroflex™ Adjustable Rear Upper Control Arms
- Durotrak™ Adjustable Rear Track Bar
- All Required Hardware
TECHNICAL SPECIFICATIONS
| Items | Details |
|---|---|
| Compatibility | 2007+ Toyota FJ Cruiser 2003 - 2024 Toyota 4Runner 2003 - 2009 Lexus GX470 2010+ Lexus GX460 |
| Control Arms | Lower: 1.625" OD x .25" Wall DOM Steel Tubing Upper: 1.25" OD x .187" Wall DOM Steel Tubing |
| Duroflex™ Joints | Proprietary Vulcanized Elastomer with DuPont™ Kevlar® Fiber |
| Track Bar | Solid 1.25" OD 4130 Chromoly Steel |
| Durotrak™ Bushings | Proprietary Vulcanized Elastomer |
| Coating | Gold Zinc |
IMPORTANT NOTES
Vehicle Alignment: We recommend having a suspension specialist align your vehicle after installing a MetalCloak suspension.
System Customization: This item is offered as a complete system containing all components shown. We cannot customize, replace, or remove components from the kit. If you need a custom order, all components are available individually, and our sales team can help you place your order.
System Components: If you purchase this system and decide you do not need a component or part of the system, we cannot accept returns.
INSTALLATION
| Installation Difficulty | Easy |
| Body Modification | Some Drilling |
| Time to Install | 2 - 3 Hours |
Fitment & Specifications
| Brand | Metal Cloak |
|---|---|
| Product Type | Control Arms & Links |
| Vehicle Fitment | Toyota 4Runner, Toyota FJ Cruiser, Lexus GX460, Lexus GX470 |
| Part Number | 7803 |

$1,074.00