Metal Cloak Bronco 6G Duroflex Adjustable Control Arms, Rear, Full Set
Couldn't load pickup availability
Want it installed?
Our techs can fit it at the shop in Vancouver, WA. Book an install or call (360) 440-6375.
Shop safely
Secure your shopping experience with various safe and trusted payment methods.
VIDEOS
MetalCloak's Bronco 6G Suspension Components are second to none.
Featured Product: Bronco 6G Rear Duroflex™ Control Arms
MetalCloak Bronco 6G Rear Duroflex™ Control Arms represent one of our best innovations in suspension components.
Duroflex™ 101
This short video covers the basics of the Duroflex™ Joint, how it should be used, and what to expect when using it.
Why Gold Zinc?
It's time for The MetalCloak Minute... where we answer frequently asked questions in about a minute. Today's topic: Gold Zinc.
Duroflex™ Joint Maintenance
It's time for The MetalCloak Minute... where we answer frequently asked questions in about a minute. Today's topic: Joint Maintenance
Duroflex™ Joint Revealed
The MetalCloak Duroflex™ Joint gives better damping properties over OEM-style rubber Clevite Joints and provides more misalignment than “other” inferior Flex Joints.
Vibration Damping
We tested our Duroflex™ Joint using a "Shaker Table" and seismometer app to show how much Vibration Damping the Duroflex™ Joint gives you compared to other industry leading joints.
A Comparison of Flex
Comparing the Flex of the Duroflex™ Joint with that of the Johnny Joint, the Teraflex Monster and the typical Clevite.
What is Corner Travel Index?
Since 2014, MetalCloak has tested thousands of rigs at events across the country, collecting build specifications and cataloging the results. The data collected helps us make our products better.
FMVSS 126 Compliant
MetalCloak not only has the best off road flex, but we are also Federal Motor Vehicle Safety Standard 126 certified and compliant. No other company can match our on- and off-road performance.
THE TECH
IT ALL STARTS WITH THE BUSHINGS
The Patented Duroflex™ Joint ( metalcloakpatents.com ) is the key to getting the greatest flex in a bolt-on suspension kit. Period.
MetalCloak has taken the best features of the most widely used control arm joints and combined those features to create the Duroflex™ Joint, producing a Low-Maintenance, High-Misalignment (34°), Self-Centering, Rebuildable Joint with an OEM-quality ride.
Now with Kevlar!
DuPont™ Kevlar® Fiber is now compounded in the proprietary elastomer of the Duroflex™ Bushing, bringing even more strength, durability and performance.
Kevlar® is a synthetic fiber with extremely high tensile strength to weight ratio…five times stronger than steel and commonly used in bullet proof armor applications.
Duroflex™ Bushings w/Kevlar® can be identified by the MetalCloak “M” located on the outer surface.
The Duroflex™ Joint Provides The Best Ride. Period.
Made of a proprietary elastomer compound, the Duroflex™ Joint provides high vibration damping and self-centering characteristics for:
- The best ride quality
- No binding of your control arms.
- None of the micro-wear that DESTROYS Flex Joints
High Misalignment...
By adapting the High Transverse Flex characteristics of a typical Flex Joint, the Duroflex™ Joint gives you...
- Over 34° of Misalignment
- Over 68° per Control Arm
Absorbs Micro-Movements...
Because the Duroflex™ Bushing absorbs the millions of Rotational Micro-Movements found in your daily driving, you get...
- Improved Ride Quality
- None of the micro-wear that DESTROYS Flex Joints
True Bearing Surface...
The outer surface of the Duroflex™ Bushing acts as a bearing, breaking free when called for, giving you...
- Maximum Rotation & Articulation
- No "Binding Up" of the Control Arms
Low Maintenance & Rebuildable...
Unlike typical Flex Joints, the Duroflex™ does not require replacing key parts every year like others...
But, when you do need to rebuild it, it is MetalCloak Easy!
Remove the Duroflex™ Bushing, clean it, apply fresh Teflon-impregnated synthetic silicone grease, and reassemble.
Done.
Forged for Strength...
The adjustable threaded ends are forged, providing 37% higher fatigue strength than inferior cast parts. This extra strength helps them withstand repeated rock impacts on the trail.
Control Arm Duroflex™ Joint Alignment...
At MetalCloak we take the care to build every product right.
Most manufacturers build their control arms misaligned from center. Why? It simply costs less to do so.
By not cutting any corners, our joints are Centered and Aligned reducing wear and improving performance.
It makes them easier to install, too!
Bronco Upper Rear (SKU #B0301)
- CNC Machined
- 3/16" Wall DOM Steel
- 1.5" OD
- Precision Locking Nut
- Gold Zinc Plated
- Duroflex™ Joint at Both Ends
- Lengthened for Best Axle Position
- Threaded Forged Ends
Bronco Lower Rear (SKU #B0302)
- CNC Machined
- 1/4" Wall DOM Steel
- 1 5/8" OD
- Precision Locking Nut
- Gold Zinc Plated
- Duroflex™ Joint at Both Ends
- Lengthened for Best Axle Position
- Threaded Forged Ends
Degrees of Articulation
MetalCloak's Duroflex™ Joint provides 28° more articulation and flex than typical control arms!
What's In The Kit?
- Rear Upper Control Arms
- Rear Lower Control Arms
TECHNICAL SPECIFICATIONS
| Items | Details |
|---|---|
| Compatibility | 2021 - Current Bronco 6G |
| Rear Upper Control Arms | 1 1/2" x .188" DOM Steel Tubing |
| Rear Lower Control Arms | 1 5/8" x .25" DOM Steel Tubing |
| Duroflex™ Joint | Proprietary Vulcanized Elastomer made with DuPont™ Kevlar® fiber |
| Coating | Gold Zinc |
IMPORTANT NOTES
Gas Tank: Replacement of the Bronco rear control arms requires the removal of the gas tank.
INSTALLATION
| Installation Difficulty | Moderate |
| Body Modification | None |
| Time to Install | 2 - 3 Hours |
Fitment & Specifications
| Brand | Metal Cloak |
|---|---|
| Product Type | Control Arms & Links |
| Vehicle Fitment | Ford Bronco 6G |
| Part Number | B0303 |

$849.00