Metal Cloak Bronco 6G Rear Control Arm Duroflex Bushing Kit
Couldn't load pickup availability
Want it installed?
Our techs can fit it at the shop in Vancouver, WA. Book an install or call (360) 440-6375.
Shop safely
Secure your shopping experience with various safe and trusted payment methods.
A complete package to replace all the MetalCloak Duroflex™ Joints in your MetalCloak Bronco 6G Rear Control Arms.
Features Include:
- Fits MetalCloak Bronco 6G Rear Control Arms
- (4) SS-3084-K 3.0" D X 2.92" L X .65" ID
- (4) SS-3087-K 3.0" D X 2.75" L X .65" ID
- Duroflex™ Joints
- Maximum Vibration Damping
- Self-Centering
- High Misalignment
- Unconstrained Rotational Flex
- Low-Maintenance And Easily Rebuildable
The Duroflex™ Joint's Kevlar-infused rubber provides excellent noise, vibration, and harshness (NVH) damping along with durability. High misalignment capability allows greater flex, while the joints self-center to provide a quiet, smooth, bind-free suspension.
Note: Warranty valid ONLY if Duroflex™ Joints are installed on both ends of the control arm.
Note: MetalCloak recommends you have a suspension specialist align your Bronco once a MetalCloak suspension is installed.
VIDEOS
MetalCloak's Bronco Suspension Components Are Second to None
Why Gold Zinc?
It's time for The MetalCloak Minute... where we answer frequently asked questions in about a minute. Today's topic: Gold Zinc.
Duroflex™ 101
This short video covers the basics of the Duroflex™ Joint, how it should be used, and what to expect when using it.
A Comparison of Flex
Compare the flex of the Duroflex™ Joint with the Johnny Joint, Teraflex Monster, and a typical Clevite joint.
Duroflex™ Joint Maintenance
It's time for The MetalCloak Minute... where we answer frequently asked questions in about a minute. Today's topic: Joint Maintenance.
Duroflex™ Joint Revealed
The MetalCloak Duroflex™ Joint provides better vibration damping than OEM-style rubber Clevite joints and more misalignment than other flex joints.
Vibration Damping
We tested our Duroflex™ Joint using a shaker table and a seismometer app to demonstrate its vibration damping compared to other industry-leading joints.
FMVSS 126 Compliant
MetalCloak not only has the best off-road flex, but we are also Federal Motor Vehicle Safety Standard 126 certified and compliant. No other company can match our on- and off-road performance.
THE TECH
Duroflex™ Bushings
IT ALL STARTS WITH THE BUSHINGS
The patented Duroflex™ Joint (metalcloakpatents.com) is the key to getting the greatest flex in a bolt-on suspension kit. Period.
MetalCloak has combined the best features of widely used control arm joints to create the Duroflex™ Joint: a low-maintenance, self-centering, rebuildable joint with high misalignment capability and an OEM-quality ride.
Now with Kevlar!
DuPont™ Kevlar® fiber is compounded into the proprietary elastomer of the Duroflex™ Bushing, bringing even more strength, durability, and performance.
Kevlar® is a synthetic fiber with an extremely high tensile strength-to-weight ratio, five times stronger than steel by weight, and is commonly used in ballistic armor applications.
Duroflex™ Bushings with Kevlar® can be identified by the MetalCloak "M" on the outer surface.
The Duroflex™ Joint Provides The Best Ride. Period.
High Vibration Damping & Self-Centering...
Made of a proprietary elastomer compound, the Duroflex™ Joint provides high vibration damping and self-centering characteristics for:
- The best ride quality
- No binding of your control arms
- None of the micro-wear that destroys flex joints
High Misalignment...
By incorporating the transverse flex characteristics of a typical flex joint, the Duroflex™ Joint provides:
- Incredible Misalignment
- Self-Centering Control Arms
Absorbs Micro-Movements...
The Duroflex™ Bushing absorbs the millions of rotational micro-movements that occur during daily driving, providing:
- Improved Ride Quality
- None of the micro-wear that destroys flex joints
True Bearing Surface...
The outer surface of the Duroflex™ Bushing acts as a bearing, breaking free when needed to provide:
- Maximum Rotation & Articulation
- No Binding of the Control Arms
Low-Maintenance & Rebuildable...
Unlike typical flex joints, the Duroflex™ Joint does not require annual replacement of key parts.
When you do need to rebuild it, it is MetalCloak Easy!
Remove the Duroflex™ Bushing, clean it, apply fresh Teflon-impregnated synthetic silicone grease, and reassemble.
Done.
What's in the Kit?
- (4) SS-3084-K 3.0" D x 2.92" L x .65" ID
- (4) SS-3087-K 3.0" D x 2.75" L x .65" ID
TECHNICAL SPECIFICATIONS
| Items | Details |
|---|---|
| Duroflex™ Joint | Proprietary Vulcanized Elastomer Made with DuPont™ Kevlar® Fiber |
IMPORTANT NOTES
Warranty: Warranty valid ONLY if Duroflex™ Joints are installed on both ends of the control arm.
Alignment Specialist: MetalCloak recommends you have a suspension specialist align your Bronco once a MetalCloak suspension is installed.
INSTALLATION
| Installation Difficulty | Easy |
| Body Modification | None |
| Time to Install | 1 Hour |
Fitment & Specifications
| Brand | Metal Cloak |
|---|---|
| Product Type | Control Arms & Links |
| Vehicle Fitment | Ford Bronco 6G |
| Part Number | B0340 |

$179.00