Metal Cloak DB3" Rear Control Arm Bolt-On System, JL Wrangler | JK Wrangler
Couldn't load pickup availability
Want it installed?
Our techs can fit it at the shop in Vancouver, WA. Book an install or call (360) 440-6375.
Shop safely
Secure your shopping experience with various safe and trusted payment methods.
The MetalCloak Jeep JL Wrangler & JK Wrangler DB3 Rear Control Arm Add-On System represents two patented innovations in suspension components. Our Patented (metalcloakpatents.com) Duroflex Joints are designed to stay centered and aligned to the frame and axle for the best long-term performance, and the patented "DB3" brackets correct rear control arm geometry.
Features Include:
- Fits 2007-2018 JK Wrangler & 2018+ JL Wrangler
- CNC-Formed 1-1/2" OD x .187" Wall DOM Steel Tubing (Rear Upper Control Arms)
- CNC-Formed 1-5/8" OD x .250" Wall DOM Steel Tubing (Rear Lower Control Arms)
- 3/16" Steel Rear Drop Bracket
- Adjustable Forged Threaded Ends
- High-Clearance Bends
- Duroflex™ Joints Enhanced with Kevlar
- Vibration-Dampening & Self-Centering (Best Ride Quality)
- 68° of Maximum Articulation (Typical Arms Only 40°)
- Maintenance-Free and Easily Rebuildable
- Gold Zinc Plated for Protection Against the Elements
- Designed for Maximum UP and DOWN Travel
- Drop Bracket is Fully Welded
- Angled for Approach & Departure
- Trail-Tested Built-In Skid Plate
- All Required Hardware
- Made in the USA
Fitted with Duroflex™ Joints, the only vulcanized elastomer, self-centering joint enhanced with DuPont™ Kevlar® fiber – providing incredible durability with more misalignment in the control arms and better vibration dampening than anything else available. Exclusive to MetalCloak.
Our simple-to-install, bolt-on bracket repositions the rear control arms to operate within a corrected radius. This system drastically reduces the feel of bump-steer/axle steer on lifted Jeeps and provides handling characteristics comparable to, if not better than, a stock-height Jeep.
Feel the improvement in acceleration, braking, climbing, and steering with the DB3. The DB3 is only available from MetalCloak.
Note: The DB3 is not compatible with the 392 JL Wrangler.
VIDEOS
MetalCloak's Jeep JL Wrangler & JK Wrangler Suspension Components are second to none
Rear Duroflex Control Arms
MetalCloak JL Wrangler & JK Wrangler Jeep Duroflex™ Control Arms represent one of our best innovations in suspension components.
Duroflex 101
This short video covers what you need to know about the basics of the Duroflex Joint, how it should be used, and what to expect when using it.
Why Gold Zinc?
It's time for The MetalCloak Minute... where we answer frequently asked questions in about a minute. Today's topic: Gold Zinc.
Duroflex Joint Maintenance
It's time for The MetalCloak Minute... where we answer frequently asked questions in about a minute. Today's topic: Joint Maintenance.
Duroflex Joint Revealed
The MetalCloak Duroflex Joint gives better dampening properties over OEM style rubber Clevite Joints and provides more misalignment than "other" inferior Flex Joints.
Vibration Dampening
We tested our Duroflex Joint using a "Shaker Table" and seismometer app to show how much vibration dampening the Duroflex Joint gives you compared to other industry-leading joints.
A Comparison of Flex
Comparing the Flex of the Duroflex Joint with that of the Johnny Joint, the Teraflex Monster and the typical Clevite.
Introducing the DB3
The "DB3" Rear Control Arm Correction Bracket is the ONLY bolt-on solution to correct rear control arm geometry.
FMVSS 126 Compliant
MetalCloak not only has the best off-road flex, but we are also Federal Motor Vehicle Safety Standard 126 certified and compliant. No other company can match our on- and off-road performance.
THE TECH
IT ALL STARTS WITH THE BUSHINGS
The Patented Duroflex™ Joint (metalcloakpatents.com) is the key to getting the greatest flex in a bolt-on suspension kit. Period.
MetalCloak has taken the best features of the most widely used control arm joints and combined those features to create the Duroflex Joint, producing a Low-Maintenance, High-Misalignment (34˚), Self-Centering, Rebuildable Joint with an OEM quality ride.
Now with Kevlar!

DuPont™ Kevlar® Fiber is now compounded in the proprietary elastomer of the Duroflex Bushing, bringing even more strength, durability and performance.
Kevlar® is a synthetic fiber with an extremely high tensile strength-to-weight ratio…five times stronger than steel and commonly used in bulletproof armor applications.
Duroflex Bushings w/Kevlar® can be identified by the MetalCloak "M" located on the outer surface.
The Duroflex Joint Provides The Best Ride. Period.
High Vibration Dampening & Self-Centering...
Made of a Proprietary Elastomer Compound, the High Vibration Dampening and Self-Centering characteristics of the Duroflex Joint mean you will always get...
- The Best Ride Quality
- No Binding of Your Control Arms
- None of the Micro-Wear That DESTROYS Flex Joints


High Misalignment...
By adapting the High Transverse Flex characteristics of a typical Flex Joint, the Duroflex Joint gives you...
- Over 34° of Misalignment
- Over 68° per Control Arm
Absorbs Micro-Movements...
Because the Duroflex Bushing absorbs the millions of Rotational Micro-Movements found in your daily driving, you get...
- Improved Ride Quality
- None of the Micro-Wear That DESTROYS Flex Joints


True Bearing Surface...
The outer surface of the Duroflex Bushing acts as a bearing, breaking free when called for, giving you...
- Maximum Rotation & Articulation
- No "Binding Up" of the Control Arms
Low Maintenance & Rebuildable...
Unlike typical Flex Joints, the Duroflex does not require replacing key parts every year like others...
But, when you do need to rebuild it, it is MetalCloak Easy!
Just pull out the Duroflex Bushing, clean it up, add some new Teflon-impregnated, synthetic silicone grease. Reassemble.
Done.


Forged for Strength...
The adjustable threaded ends are forged, providing a 37% higher fatigue strength over inferior cast parts; this EXTRA rock-bashing strength will hold up to whatever you throw at it.
At MetalCloak We Take The Care To Build It Right...
Control Arm Duroflex Joint Alignment...
At MetalCloak we take the care to build every product right.
Most manufacturers build their control arms misaligned from center. Why? It simply costs less to do so.
By not cutting any corners, our joints are Centered and Aligned reducing wear and improving performance.
It makes them easier to install, too!

Control Arm Specs
JL/JK Wrangler Lower Rear (SKU #7003)
- CNC Machined
- 1/4" Wall DOM Steel
- 1.625" OD
- Precision Locking Nut
- Gold Zinc Plated
- Duroflex Joint at Both Ends
- Lengthened 5/8" for Best Axle Position
- Threaded Forged Ends
JL/JK Wrangler Upper Rear (SKU #7004)
- CNC Formed
- 3/16" Wall DOM Steel
- 1.5" OD
- Precision Locking Nut
- Threaded Forged Ends
- Designed for Oversize Tire Clearance
- Gold Zinc Plated
- Duroflex Joint at Both Ends
- Lengthened for Best Axle Position
Degrees of Articulation
MetalCloak's Duroflex Joint provides 28˚ more articulation and flex than typical control arms! (Learn More About Duroflex Control Arms)
Rear Control Arm Correction Bracket "DB3"

The green line shows the DB3 and how it tucks behind the wheel for optimal approach.
The red line shows a "typical" long arm hang-up point MUCH farther forward, increasing the chance of hanging up.
The DB3 provides superior control arm angles for a better ride AND provides better approach angles over a rear long arm all in a simple bolt-on application.
Correction Bracket Features
This product adjusts the roll center of your Jeep, and corrects the geometry of the control arms enabling the full use of up and down travel.
The entire bracket assembly is welded together for incredible strength, has built-in approach skids, and all surfaces are angled to keep from catching on obstacles. Installs into factory locations, bolting securely in place.

What Does It Do?
Adding this system improves rear control arm geometry and adjusts rear axle caster for lifted JK & JL Wranglers. The flatter the control arms are, the better; the benefits are immediately felt with a smoother ride and stable handling as the roll center has been adjusted. Braking performance also improves, maximizing safety along with the comfort and performance of your Jeep.

What's in the Kit?

- DB3 Correction Bracket
- Rear Upper Control Arms
- Rear Lower Control Arms
- All Required Hardware
TECHNICAL SPECIFICATIONS
| Items | Details |
|---|---|
| Compatibility | 2007-2018 JK Wrangler | 2018+ JL Wrangler |
| Control Arms | 1-5/8" OD x .250" Wall DOM Steel Tubing (Lower) 1-1/2" OD x .187" Wall DOM Steel Tubing (Upper) |
| Duroflex Joint | Proprietary Vulcanized Elastomer made with DuPont™ Kevlar® fiber |
| Correction Bracket | 3/16" Steel Sheet |
| Coating | Gold Zinc |
IMPORTANT NOTES
392 JL Wrangler: The DB3 is not compatible with the 392 JL Wrangler.
INSTALLATION
| Difficulty | Moderate |
| Body Modification | None |
| Time to Install | 4-6 Hours |
Fitment & Specifications
| Brand | Metal Cloak |
|---|---|
| Product Type | Control Arms & Links |
| Vehicle Fitment | Jeep Wrangler JL, Jeep Wrangler JK |
| Part Number | 7260 |

$1,447.00