Metal Cloak DB3" Rear Control Arm Correction Bracket JK Wrangler | JL Wrangler
Couldn't load pickup availability
Want it installed?
Our techs can fit it at the shop in Vancouver, WA. Book an install or call (360) 440-6375.
Shop safely
Secure your shopping experience with various safe and trusted payment methods.
The MetalCloak Jeep JK & JL Wrangler "DB3" Rear Control Arm Correction Bracket system is the ONLY bolt-on solution to correct rear control arm geometry.
Features Include:
- Fits 2007-2018 JK Wrangler & 2018+ JL Wrangler
- 3/16" Steel
- CAD Designed
- Laser-Cut
- Fully Welded
- Angled for Approach & Departure
- Trail-Tested Built-In Skid Plate
- Gold Zinc Finish
- All Required Hardware
- Made in the USA
Feel the improvement in acceleration, braking, climbing, and steering with the DB3. The DB3 is only available from MetalCloak.
Note: The DB3 is not compatible with the 392 JL Wrangler.
Note: This alignment bracket is designed to be used with adjustable rear control arms. Not to be used with stock control arms.
VIDEOS
MetalCloak's Jeep Wrangler Suspension
Introducing the DB3
The "DB3" Rear Control Arm Correction Bracket is the ONLY bolt-on solution to correct rear control arm geometry.
Why Gold Zinc?
It's time for The MetalCloak Minute... where we answer frequently asked questions in about a minute. Today's topic: Gold Zinc.
What is Corner Travel Index?
Since 2014, MetalCloak has tested thousands and thousands of rigs at events all across the country collecting specs on the build and cataloging the results. The data collected allows us to make our own products better.
FMVSS 126 Compliant
MetalCloak not only has the best off-road flex, but we are also Federal Motor Vehicle Safety Standard 126 certified and compliant. No other company can match our on- and off-road performance.
THE TECH
Rear Control Arm Correction Bracket "DB3"
(Give it a spin to see a 360 view)
Approach Angles and Ride Quality
The green line shows the DB3 and how it tucks behind the wheel for optimal approach.
The red line shows a "typical" long arm hang-up point MUCH farther forward, increasing the chance of hanging up.
The DB3 provides superior control arm angles for a better ride AND provides better approach angles over a rear long arm all in a simple bolt-on application.

Correction Bracket Features

This product adjusts the roll center of your Jeep, and corrects the geometry of the control arms enabling the full use of up and down travel.
The entire bracket assembly is welded together for incredible strength, has built-in approach skids, and all surfaces are angled to keep from catching on obstacles. Installs into factory locations, bolting securely in place.
What Does It Do?
Adding this system improves rear control arm geometry and adjusts rear axle caster for lifted JK & JL Wranglers. The flatter the control arms are, the better; the benefits are immediately felt with a smoother ride and stable handling as the roll center has been adjusted. Braking performance also improves, maximizing safety along with the comfort and performance of your Jeep.

What's in the Kit?
- DB3 Correction Bracket
- Bracket Spacers
- All Required Hardware

TECHNICAL SPECIFICATIONS
| Items | Details |
|---|---|
| Compatibility | 2007-2018 JK Wrangler | 2018+ JL Wrangler |
| Correction Bracket | 3/16" Steel Sheet |
| Coating | Gold Zinc |
IMPORTANT NOTES
392 JL Wrangler: The DB3 is not compatible with the 392 JL Wrangler.
Control Arms: This alignment bracket is designed to be used with adjustable rear control arms. Not to be used with stock control arms.
INSTALLATION
| Difficulty | Easy |
| Body Modification | Some Drilling |
| Time to Install | 2 Hours |
Fitment & Specifications
| Brand | Metal Cloak |
|---|---|
| Product Type | Control Arms & Links |
| Vehicle Fitment | Jeep Wrangler JL, Jeep Wrangler JK |
| Part Number | 7697 |

$489.00