Metal Cloak Frame-Built Bumper #231002, TJ - Base Option
Couldn't load pickup availability
Want it installed?
Our techs can fit it at the shop in Vancouver, WA. Book an install or call (360) 440-6375.
Shop safely
Secure your shopping experience with various safe and trusted payment methods.
MetalCloak's Jeep TJ & LJ Wrangler Frame-Built Bumper (Pre-Configured) - one of our most popular builds.
Features Include:
- Fits 1997-2006 TJ/LJ Wrangler
- Frame-Built Bumper Base
- 43" Hi-Crawler Caps
- Hi-Mount Shackles
- Hi-Mount Stinger
- All Required Hardware
- Easy to Install
- Made in the USA
The base is designed to mount all popular winch brands; the unique design ensures the winch is as low as possible for the best possible airflow through the Seven Slot grille.
The hi-crawler caps mount directly to the MetalCloak frame-built bumper base, measuring 43" from end to end when installed. The hi-crawler caps are designed to work in conjunction with the hi-mount shackle kit, are made of strong laser-cut 3/16" steel, have built-in approach angles to help slide up and over obstacles and are finished in MetalCloak's signature black textured powder coat to help protect them against the elements.
The hi-mount shackles mount directly to the MetalCloak bumper base and are designed to hold 3/4" D-ring shackles. The 2" thick aluminum structure provides a strong recovery point when out on the trail. The hi-mount shackles are finished in a Type III mil-spec black anodized finish to help protect them against the elements. The hi-mount shackles come with a rounded-edge design that allows for the use of either a standard metal D-ring or a soft shackle.
The Hi-Mount Stinger's low-profile design adds protection without obstructing your line of sight. It is made of strong 3/16" hot-rolled steel and 1-3/4" steel tubing and works in conjunction with the MetalCloak Hi-Mount Shackle Kit. The stinger protects the winch from damage when out on the trail while providing no loss in approach angle like typical bulky front bumpers. The stinger comes with welded-on shackle mount recovery points for when you or others are stuck on the trail.
Note: In January 2024, the shackle mount design was improved. The "rounded edge" design allows for the use of either standard metal D-rings or soft shackles.
Note: All TJ/LJ/YJ hoops come with weld-on shackles.
Note: Shackle mounts are engineered to be used as recovery points only; the shackle mounts are NOT designed for flat-towing.
VIDEOS
MetalCloak's Jeep Wrangler Bumpers
TJ/LJ/YJ Frame-Built Bumper Base
The Frame-Built Base is rugged in function and sleek in design.
Premium Black Powder Coat
Our signature black textured powder coat provides a micro-texture, semi-gloss finish that is easily repairable after trail damage. Watch the video to learn more.
THE TECH
Front Bumper Base
The MetalCloak Front Bumper for the Jeep YJ/TJ/LJ Wrangler provides a customized look.
- 3/16" Steel Plate
- 45° Approach Angle
- 30K PSI Yield Strength (Bend Point)
- 49K PSI Tensile Strength (Break Point)
- Seamless Construction (Zero Welds)
- Premium Black Textured Powder Coating

Front Bumper Base Specifications

The Frame-Built Bumper Base replaces the weak factory bumper with a 3/16" steel plate that is a sturdy platform for mounting a winch.
Bolts directly on and works with all components.

43" Hi-Crawler Caps
The MetalCloak 43" Hi-Crawler Caps for the Jeep CJ/YJ/TJ/LJ Wrangler provide a customized look for MetalCloak frame-built front bumpers.
- 3/16" Hot-Rolled Steel Plate
- 45° Approach Angle
- 50° Front Turning Clearance
- 45° Side Clearance Angle
- Seamless Construction (Zero Welds)
- Premium Black Textured Powder Coating

43" Hi-Crawler Caps Specifications

The 43" Hi-Crawler Caps mount directly to the MetalCloak bumper base and are designed for mounting with the hi-mount shackle kit. The crawler caps are made of 3/16" hot-rolled steel plate and provide minimal obstructions and the best in approach angles.
Bolts directly on and works with all components.

Hi-Mount Shackle Systems
The MetalCloak Hi-Mount Shackle System for the CJ/YJ/TJ/LJ Jeep Wrangler Frame-Built bumper provides a unique upper recovery mount that is trail-tested tough, capable of handling anything you can throw at it.
- T6 Aircraft-Grade Aluminum
- Type III Mil-Spec Anodized Hard Coat Finish
- Holds up to 3/4" Shackles/D-Rings

Round Edge Design

The Billet Shackle System (as of January 2024) has a rounded-edge design that allows for the use of either a standard metal D-ring or a soft shackle.
Hi-Mount Shackle Specifications
The hi-mount shackles mount directly to the MetalCloak bumper base and are designed to hold 3/4" D-ring shackles. The hi-mount shackles are made of 2" aluminum and provide a strong recovery point when out on the trail. The hi-mount shackles are finished in a Type III mil-spec black anodized finish to help protect them against the elements.
Like all our components, they are Frame-Built and can be bolted directly to the frame with or without the Frame-Built Base.


Hi-Mount Stinger

The MetalCloak Hi-Mount Stinger for the Jeep YJ/TJ/LJ Wrangler provides a customized look for MetalCloak frame-built front bumpers.
- 1-3/4" .120" Wall Tubing
- Hot-Formed 3/16" Steel Plate
- 45° Approach Angle
- 59° Support Angle
- 15-1/2" Height Above Bumper
- 21-1/4" Stinger Width
- Premium Black Textured Powder Coating
Hi-Mount Stinger Specifications
The Hi-Mount Stinger's low-profile design adds protection without obstructing your line of sight. It is made of strong 3/16" hot-rolled steel and 1-3/4" steel tubing. The stinger protects the winch from damage when out on the trail while providing no loss in approach angle like typical bulky front bumpers.
Bolts directly on and works with all components.


What's in the Kit?

- Front Bumper
- 43" Hi-Crawler Caps
- Hi-Mount Shackles
- Hi-Mount Stinger
- All Required Hardware
TECHNICAL SPECIFICATIONS
| Items | Details |
|---|---|
| Compatibility | 1997-2006 TJ/LJ Wrangler |
| Front Bumper Base | 3/16" Hot-Rolled Steel Plate |
| 43" Hi-Crawler Caps | 3/16" Hot-Rolled Steel Plate |
| Hi-Mount Shackles | 2" x 1-1/4" 6061-T6 Aluminum |
| Hi-Mount Stinger | 1-3/4" OD x .120" Wall Steel Tubing 3/16" Hot-Rolled Steel Plate |
| Coating | Black Powder Coat - Bumper, End Caps & Stinger Black Anodized - Hi-Mount Shackles |
IMPORTANT NOTES
Soft Shackles: In January 2024, the shackle mount design was improved. The "rounded edge" design allows for the use of either standard metal D-rings or soft shackles.
Hoops: All TJ/LJ/YJ hoops come with weld-on shackles.
Recovery Points: Shackle mounts are engineered to be used as recovery points only; the shackle mounts are NOT designed for flat-towing.
INSTALLATION
| Difficulty | Easy |
| Body Modification | None |
| Time to Install | 1-2 Hours |
Fitment & Specifications
| Brand | Metal Cloak |
|---|---|
| Product Type | Bumpers & Recovery |
| Vehicle Fitment | Jeep Wrangler TJ |
| Part Number | FB-TJ-231002 |

$854.00