Metal Cloak Front Duroflex Weld-On Bracket and Axle Bushing Kit, Jeep TJ/LJ Wrangler

Skip to product information
1 of 4
Regular price $124.00
Sale price $124.00 Regular price
Shipping calculated at checkout.

Want it installed?

Our techs can fit it at the shop in Vancouver, WA. Book an install or call (360) 440-6375.

MetalCloak's Front Duroflex Weld-On Bracket and Axle Bushing Kit replaces the factory Clevite bushings with a reinforced and gusseted insert and Duroflex Kevlar-enhanced bushings for your Jeep TJ/LJ Wrangler.

Features Include:

  • Fits 1997-2006 TJ/LJ Wrangler with MetalCloak Duroflex Control Arms
  • Duroflex Joints
  • Press-In Housing
  • Tower Gusset
  • Retaining Washers
  • Retaining Clip
  • All Required Hardware
  • Maximum Rotation & Articulation
  • Made in the USA

Factory Clevite bushings will work in conjunction with Duroflex bushings; however, they have a very limited range of performance.

Optimize the Duroflex Joints in your MetalCloak control arms and fully benefit from increased NVH dampening (noise/vibration/harshness), more misalignment for articulation (34 degrees per end) and rotation (360 degrees). Upgrading your bushings with the MetalCloak Front Duroflex Weld-On Bracket and Axle Bushing Kit also strengthens the weak stock tower-housing! Better bushings and more strength!

The Front Duroflex Weld-On Bracket & Axle Bushing Kit comes complete with a press-in Duroflex bushing for the cast side and a reinforced weld-on bracket to contain the Duroflex Bushing on the other side.

Note: MetalCloak's Front Duroflex Weld-On Bracket and Axle Bushing Kit ONLY works with MetalCloak's Duroflex Control Arms. MetalCloak's Front Duroflex Weld-On Bracket and Axle Bushing Kit is not recommended for any other control arms.



VIDEOS

MetalCloak's Jeep TJ Wrangler Suspension Components are second to none

Duroflex 101

This short video covers what you need to know about the basics of the Duroflex Joint, how it should be used, and what to expect when using it.

Why Gold Zinc?

It's time for The MetalCloak Minute... where we answer frequently asked questions in about a minute. Today's topic: Gold Zinc.

Duroflex Joint Maintenance

It's time for The MetalCloak Minute... where we answer frequently asked questions in about a minute. Today's topic: Joint Maintenance.

Duroflex Joint Revealed

The MetalCloak Duroflex Joint gives better dampening properties over OEM style rubber Clevite Joints and provides more misalignment than "other" inferior Flex Joints.

Vibration Dampening

We tested our Duroflex Joint using a "Shaker Table" and seismometer app to show how much vibration dampening the Duroflex Joint gives you compared to other industry-leading joints.

A Comparison of Flex

Comparing the Flex of the Duroflex Joint with that of the Johnny Joint, the Teraflex Monster and the typical Clevite.

What is Corner Travel Index?

Since 2014, MetalCloak has tested thousands and thousands of rigs at events all across the country collecting specs on the build and cataloging the results. The data collected allows us to make our own products better.

FMVSS 126 Compliant

MetalCloak not only has the best off-road flex, but we are also Federal Motor Vehicle Safety Standard 126 certified and compliant. No other company can match our on- and off-road performance.

THE TECH

Front Duroflex Weld-On Bracket & Axle Bushing Kit

The included gusset welds to the axle and provides additional strength over the factory bracket. Get the unparalleled ride performance and increased strength with the MetalCloak Front Duroflex Weld-On Bracket & Axle Bushing Kit.

Exploded view of the axle upgrades: the Duroflex bushing pressed into the bracket and the steel gusset for the axle bracket.

Noise Vibration Dampening

Duroflex bushings provide the best vibration dampening (NVH) anywhere, along with more self-centering misalignment than any other bushing available.

MetalCloak's Front Duroflex Weld-On Bracket and Axle Bushing Kit ONLY works with MetalCloak's Steel and Aluminum Duroflex Control Arms.

Close-up of the black axle bushing housing labeled "Driver Side" with the Duroflex bushing pressed in. A 3D rendering of a Jeep axle housing with the weld-on bracket labeled "Passenger Side."

IT ALL STARTS WITH THE BUSHINGS

The Patented Duroflex™ Joint (metalcloakpatents.com) is the key to getting the greatest flex in a bolt-on suspension kit. Period.

A graphical comparison of an OEM Clevite plus a typical Flex Joint equaling a MetalCloak Duroflex Joint.

MetalCloak has taken the best features of the most widely used control arm joints and combined those features to create the Duroflex Joint, producing a Low-Maintenance, High-Misalignment (34˚), Self-Centering, Rebuildable Joint with an OEM quality ride.

Now with Kevlar!

Black Duroflex bushing enhanced with Kevlar, with a metal core.

DuPont™ Kevlar® Fiber is now compounded in the proprietary elastomer of the Duroflex Bushing, bringing even more strength, durability and performance.

Kevlar® is a synthetic fiber with an extremely high tensile strength-to-weight ratio…five times stronger than steel and commonly used in bulletproof armor applications.

Duroflex Bushings w/Kevlar® can be identified by the MetalCloak "M" located on the outer surface.

The Duroflex Joint Provides The Best Ride. Period.

High Vibration Dampening & Self-Centering...

Made of a Proprietary Elastomer Compound, the High Vibration Dampening and Self-Centering characteristics of the Duroflex Joint mean you will always get...

  • The Best Ride Quality
  • No Binding of Your Control Arms
  • None of the Micro-Wear That DESTROYS Flex Joints
A close-up shot of a duroflex bushing illustrating its effective vibration dampening and self-centering capabilities.
A 3D animation of the metal core rotating back and forth showing the high misalignment and flex properties of the joint.

High Misalignment...

By adapting the High Transverse Flex characteristics of a typical Flex Joint, the Duroflex Joint gives you...

  • Over 34° of Misalignment
  • Over 68° per Control Arm

Absorbs Micro-Movements...

Because the Duroflex Bushing absorbs the millions of Rotational Micro-Movements found in your daily driving, you get...

  • Improved Ride Quality
  • None of the Micro-Wear That DESTROYS Flex Joints
A close-up shot of a Duroflex bushing illustrating its absorption of micro movements during driving.
A close-up shot of a Duroflex bushing illustrating its full rotational range preventing binding up of the control arms.

True Bearing Surface...

The outer surface of the Duroflex Bushing acts as a bearing, breaking free when called for, giving you...

  • Maximum Rotation & Articulation
  • No "Binding Up" of the Control Arms

Low Maintenance & Rebuildable...

Unlike typical Flex Joints, the Duroflex does not require replacing key parts every year like others...

But, when you do need to rebuild it, it is MetalCloak Easy!

Just pull out the Duroflex Bushing, clean it up, add some new Teflon-impregnated, synthetic silicone grease. Reassemble.

Done.

A black Duroflex™ Rebuild Kit part against a white background.

What's in the Kit?

Contents of the MetalCloak TJ/LJ Wrangler front Duroflex weld-on bracket and axle bushing kit, including the Duroflex joints, press-in housing, tower gusset, retaining washers, retaining clip and all required hardware.
  • Duroflex Joints
  • Press-In Housing
  • Tower Gusset
  • Retaining Washers
  • Retaining Clip
  • All Required Hardware

TECHNICAL SPECIFICATIONS



Items Details
Compatibility 1997-2006 TJ/LJ Wrangler with MetalCloak Duroflex Control Arms
Billet Tower A36 Steel
Press-In Housing 2.0" OD x 1.5" ID x .25" Wall DOM A513
Duroflex Joint Proprietary Vulcanized Elastomer Made with DuPont™ Kevlar® Fiber
Coating Raw


IMPORTANT NOTES



Compatibility: MetalCloak's Front Duroflex Weld-On Bracket and Axle Bushing Kit ONLY works with MetalCloak's Duroflex Control Arms. MetalCloak's Front Duroflex Weld-On Bracket and Axle Bushing Kit is not recommended for any other control arms.

INSTALLATION



Difficulty Difficult
Body Modification Welding
Time to Install 1-2 Hours


Fitment & Specifications

Brand Metal Cloak
Product Type Joints & Bushings
Vehicle Fitment Jeep Wrangler TJ, Jeep Wrangler LJ
Part Number 7349
Metal Cloak Front Duroflex Weld-On Bracket and Axle Bushing Kit, Jeep TJ/LJ Wrangler

$124.00

Questions about this part?
Call the shop.