Metal Cloak Jeep JL Wrangler & JT Gladiator Bolt-On 4-Link Front System, 4-Door - Base Option
Couldn't load pickup availability
Want it installed?
Our techs can fit it at the shop in Vancouver, WA. Book an install or call (360) 440-6375.
Shop safely
Secure your shopping experience with various safe and trusted payment methods.
The "Bolt-On" Front Long Arm System provides the most consistent wheelbase measurements throughout the cycle of suspension along with improved pinion angle for your Jeep.
Features Include:
- Fits 2018+ JL Wrangler 4-Door & 2020+ JT Gladiator
- Frame-Mounted Upper/Lower 1/4" Steel Control Arm Brackets
- 2 Upper Long Arm Duroflex Control Arms, 1.25" DOM .1875" (3/16") Wall
- 2 Lower Long Arm Duroflex Control Arms, 2.0" DOM .25" (1/4") Wall
- Beefy 3/16" Steel Replacement Crossmember
- Gold Zinc Protection
- All Required Hardware
- Made in the USA
Fitted with Duroflex™ Joints, the only vulcanized elastomer, self-centering joint enhanced with DuPont™ Kevlar® fiber – providing incredible durability with more misalignment in the control arms and better vibration damping than anything else available. Exclusive to MetalCloak (see detailed info in the main body).
MetalCloak Front JL/JT Long Arm Frame Mounts are used in replacement of the factory mounts when installing the front control arms for a long arm suspension. Fully welded and boxed for strength, the 1/4" steel brackets are low-profile for clearance and are finished in gold zinc for a long-lasting finish.
This system requires cutting off the factory front control arm brackets and is for the rock crawler who demands precision when it comes to wheelbase and pinion angles. MetalCloak's Front Long Arm features our best high-speed handling properties for on- and off-road. The "Bolt-On" Front Long Arm System is made in the USA.
Note: We recommend you have a suspension specialist align your Jeep once a MetalCloak suspension is installed.
Note: This item is being offered as a complete system that contains all the components shown. We cannot customize, replace or remove a component from the kit. If you need a custom order, all components are available individually and our sales team is happy to help you place your order.
Note: If you purchase this system and decide you do not need a component or part of the system, we cannot accept returns.
Note: Some Jeep JL and JT models have a different crossmember configuration. While installation is still possible, it may require some modification of the MetalCloak crossmember to install correctly.
VIDEOS
MetalCloak's Jeep JL Wrangler & JT Gladiator Suspension is the proven leader among production suspension systems
Duroflex 101
This short video covers what you need to know about the basics of the Duroflex Joint: how it should be used and what to expect when using it.
Duroflex Joint Maintenance
It's time for The MetalCloak Minute... where we answer frequently asked questions in about a minute. Today's topic: Joint Maintenance.
Duroflex Joint Revealed
The MetalCloak Duroflex Joint gives better dampening properties over OEM style rubber Clevite Joints and provides more misalignment than "other" inferior Flex Joints.
Vibration Dampening
We tested our Duroflex Joint using a "Shaker Table" and seismometer app to show how much Vibration Dampening the Duroflex Joint gives you compared to other industry-leading joints.
A Comparison of Flex
Comparing the Flex of the Duroflex Joint with that of the Johnny Joint, the Teraflex Monster and the typical Clevite.
What is Corner Travel Index?
Since 2014, MetalCloak has tested thousands and thousands of rigs at events all across the country collecting specs on the build and cataloging the results. The data collected allows us to make our own products better.
FMVSS 126 Compliant
MetalCloak not only has the best off-road flex, but we are also Federal Motor Vehicle Safety Standard 126 certified and compliant. No other company can match our on- and off-road performance.
Proudly Made in the USA
MetalCloak proudly manufactures products in America. Take a glimpse of our incredible team that lives and breathes innovation and quality.
Why Gold Zinc?
It's time for The MetalCloak Minute... where we answer frequently asked questions in about a minute. Today's topic: Gold Zinc.
THE TECH
IT ALL STARTS WITH THE BUSHINGS
The Patented Duroflex™ Joint (metalcloakpatents.com) is the key to getting the greatest flex in a bolt-on suspension kit. Period.
MetalCloak has taken the best features of the most widely used control arm joints and combined those features to create the Duroflex Joint, producing a Low-Maintenance, High-Misalignment (34˚), Self-Centering, Rebuildable Joint with an OEM quality ride.
Now with Kevlar!

DuPont™ Kevlar® Fiber is now compounded in the proprietary elastomer of the Duroflex Bushing, bringing even more strength, durability and performance.
Kevlar® is a synthetic fiber with an extremely high tensile strength-to-weight ratio…five times stronger than steel and commonly used in bulletproof armor applications.
Duroflex Bushings w/Kevlar® can be identified by the MetalCloak "M" located on the outer surface.
Control Arm Duroflex Joint Alignment...
At MetalCloak we take the care to build every product right.
Most manufacturers build their control arms misaligned from center. Why? It simply costs less to do so.
By not cutting any corners, our joints are Centered and Aligned reducing wear and improving performance.
It makes them easier to install, too!

Threaded Forged Ends

Forged for Strength...
The adjustable threaded ends are forged, providing a 37% higher fatigue strength over inferior cast parts; this EXTRA rock bashing strength will hold up to whatever you throw at 'em.
Control Arm Specs
JL Wrangler & JT Gladiator Upper Front (SKU #7291)
- CNC Formed
- 3/16" Wall DOM Steel
- 1.25" OD
- Threaded Forged Ends
- Precision Locking Nut
- Gold Zinc Plate
- Duroflex Joint at Both Ends
- 1/4" Steel Clevis
JL Wrangler & JT Gladiator Lower Front (SKU #7297)
- CNC Formed
- 1/4" Wall DOM Steel
- 2" OD
- Precision Locking Nut
- Threaded Forged Ends
- Designed for Oversize Tire Clearance
- Gold Zinc Plate
- Duroflex Joint at Both Ends
Degrees of Articulation
MetalCloak's Duroflex Joint provides 28˚ more articulation and flex than typical control arms! (Learn More About Duroflex Control Arms)
Front Bolt-On Control Arm Brackets
MetalCloak Front JL/JT Long Arm Frame Mounts are used in replacement of the factory mounts when installing the front control arms for a long arm suspension. Fully welded and boxed for strength, the 1/4" steel brackets are low-profile for clearance and are finished in gold zinc for a long-lasting finish.
Crossmember
Our upgraded 3/16" steel replacement crossmember is the benchmark of strength.
With thicker steel and additional holes for attachment points, there is no better way to support your Jeep.

What's in the Kit?

- Upper Front Long Arms
- Lower Front Long Arms
- Front Control Arm Brackets
- Replacement Crossmember
- All Required Hardware
TECHNICAL SPECIFICATIONS
| Items | Details |
|---|---|
| Compatibility | 2018+ JL Wrangler 4-Door & 2020+ JT Gladiator |
| Front Long Arms | 1.25" x .1875" & 2" x .25" DOM Steel Tubing |
| Duroflex Joint | Proprietary Vulcanized Elastomer Made With DuPont™ Kevlar® Fiber |
| Front Control Arm Brackets | 1/4" Hot Rolled Steel |
| Crossmember | 3/16" Hot Rolled Steel |
| Coating | Gold Zinc |
IMPORTANT NOTES
Suspension Alignment: We recommend you have a suspension specialist align your Jeep once a MetalCloak suspension is installed.
System Customization: This item is being offered as a complete system that contains all the components shown. We cannot customize, replace or remove a component from the kit. If you need a custom order, all components are available individually and our sales team is happy to help you place your order.
System Components: If you purchase this system and decide you do not need a component or part of the system, we cannot accept returns.
Modification: Some Jeep JL and JT models have a different crossmember configuration. While installation is still possible, it may require some modification of the MetalCloak crossmember to install correctly.
INSTALLATION
| Difficulty | Moderate |
| Body Modification | Drilling & Cutting |
| Time to Install | 10-12 Hours |
Fitment & Specifications
| Brand | Metal Cloak |
|---|---|
| Product Type | Control Arms & Links |
| Vehicle Fitment | Jeep Wrangler JL, Jeep Gladiator JT |
| Part Number | 7288 |

$1,706.00