Metal Cloak Jeep JL Wrangler, JT Gladiator, Knurled Baller Joints™, HD Ball Joints, Full Set

Skip to product information
Regular price $699.00
Sale price $699.00 Regular price
Shipping calculated at checkout.

Want it installed?

Our techs can fit it at the shop in Vancouver, WA. Book an install or call (360) 440-6375.

"BALLER" Informal adjective: extremely good, impressive or excellent.

MetalCloak's Baller Joints™ HD Knurled Ball Joints for the Jeep JL Wrangler and JT Gladiator are specifically engineered for worn or oversized axle C bores where standard ball joints may no longer maintain the proper press fit. Precision knurled housing increases retention inside the axle C to help restore a secure fit without replacing the housing.

These are the ONLY ball joints that are comprised of top-level materials with ALL the best features contained in one package. This is the last ball joint you will ever need. Upper and Lower Load Bearing, Captured, Fully Sealed, Adjustable, In-Jeep rebuildable and made in the USA.

Features Include:

  • Load Bearing Upper & Lower Joints
  • Knurled Housing For Worn or Oversized Axle C Bores
  • Increased Press-Fit Retention Strength
  • Hardened Steel Races
  • Induction-Hardened Chromoly Spindle & Ball
  • Composite Bushing For Radial Loads (Side to Side Movement)
  • Fully Sealed Top & Bottom O-Ring AND Shaft Wiper Seals
  • Recessed Zerk Fittings For Easy Service/Grease
  • Adjustable Pre-Load for Upper & Lower Joints
  • MetalCloak Lock-Ring Wrench Included
  • In-Jeep Rebuildable Upper & Lower
  • Gold Zinc, Clear Zinc & Type-III Anodized Black Finish
  • Made In The USA
MetalCloak uses the best features and combines them with top quality materials to create a ball joint replacement set that is unrivaled. Designed specifically for worn or oversized axle C bores, the knurled outer housing provides additional bite during installation to help restore proper retention in axle housings that may no longer securely hold standard ball joints.

MetalCloak ball joints start with a Chromoly spindle & ball with an induction-hardened surface strength that resists wear and provides a maximized bearing area to distribute force loads. The material gives superior ability to absorb energy without fracture over inferior materials.

The precision-machined knurled housing helps compensate for slightly enlarged or worn ball joint bores commonly found in high-mileage or heavily abused axles. This increased interference fit helps reduce unwanted movement inside the axle C and improves overall ball joint retention.

Composite bearing sleeves slide over the spindle to handle shock loads and are highly resistant to deformation. Ball and spindle are both load bearing and utilize metal-on-metal strength captured with Tool Steel Races that eliminate memory steer and provide long-lasting durability.

Both upper and lower joints are adjustable for preload tension, have recessed zerk fittings for servicing and are sealed with multiple Buna-N Rubber O-Rings along with shaft wiper seals to keep contaminants out and grease in.

Aluminum lock nuts and threaded top caps capture the joints so there is no possibility of pulling the joints out of the C.

Anodized black aluminum with Silver and Gold Zinc steel plated components highlight the quality and craftsmanship and are sure to let others know you appreciate American-made quality and top-notch performance. The ONLY joints that are Sealed, Captured, Adjustable and In-Jeep rebuildable; the last ball joints you will ever need.

Like other ball joints, only better.



VIDEOS

MetalCloak's Jeep Wrangler Accessories

Proudly Made in the USA

MetalCloak proudly manufactures products in America. Take a glimpse of our incredible team that lives and breathes innovation and quality.

Why Gold Zinc?

It's time for The MetalCloak Minute... where we answer frequently asked questions in about a minute. Today's topic: Gold Zinc.

THE TECH

Upper & Lower Knurled "Baller" Ball Joints

MetalCloak's Baller Joints™ HD Knurled Ball Joints for the Jeep JL Wrangler and JT Gladiator are specifically engineered for worn or oversized axle C bores where standard ball joints may no longer maintain the proper press fit. Precision knurled housing increases retention inside the axle C to help restore a secure fit without replacing the housing.

MetalCloak offers the ONLY ball joints that are comprised of top level materials with ALL the best features contained in one package; this is the last ball joint you will need. Upper and Lower Load Bearing, Captured, Fully Sealed, Adjustable, In-Jeep rebuildable and made in the USA.

Two renderings of ball joints, one black and gold and one gold, on a white background.

Upper "Baller" Ball Joint

(Give it a spin to see a 360 view)

Upper Ball Joint Diagram

Labeled diagram of the MetalCloak upper knurled Baller ball joint, including the black anodized cap, O-rings, wave spring, and split pin.

Load Bearing Joints

Pre-load on MetalCloak upper ball joints share force-loads from the lower joint and divide the load between both pivot locations unlike most "other" ball joints.

Comparison of axle designs showing force load distribution differences between "Other Manufacturers" and "Metalcloak".

Thread Together Captured Design

Front view of an axle C, featuring secure ball joints and an aluminum lock nut for stability.

Ball joints press in from the bottom of the C. Aluminum lock nut and top cap thread on to capture the joints so there is no possibility of the joint pulling out.

Spindle & Ball Benefits

MetalCloak "Baller" ball joint Spindle/Ball units are formed of solid Chromoly steel for durability and then are induction hardened for incredible surface strength that resists wear. The oversized bearing surface provides maximum area to distribute force loads from on- and off-road use and abuse. The induction hardening provides unsurpassed longevity for smooth bearing operation. The Baller Joint Spindle/Ball composition is the best you can get to absorb energy without possibility of fracture while maintaining an ideal hardened bearing surface that ensures a long service life; it's quality you can count on.

A metal spindle and ball with a lathe tailstock taper laying on a wooden surface.

Bearing Races

Two-part metal bearing races with a circular design, on a wooden surface.

The Concave Bearing Races are high-impact, shock-resistant, machined and heat-treated tool steel with maximum surface contact to spread force loads; this allows more pre-load relief while still resisting memory steer. Races are indexed to prevent rotation inside the ball joint housing.

Lower "Baller" Ball Joint

(Give it a spin to see a 360 view)

Lower "Baller" Ball Joint Diagram

Exploded diagram of a mechanical joint with labeled parts, including races, seals, and tensioner.

Ball Joint Wrench

The included wrench is specially designed and laser-cut to precisely fit the lower ball joint lock ring and allows for ease of installation. The wrench is made of laser-cut 3/16" hot-rolled steel, the tool is finished in gold zinc for a classic premium look and long-lasting MetalCloak quality.

A hand holding a spanner wrench with lower ball joint over a vise, with tool bins in the background.

Hand Built and Made in America

Hands assembling a black cap on a ball joint on a white workbench.

The MetalCloak Upper and Lower "Baller" Ball Joints are each meticulously assembled in-house with hand-built craftsmanship right here in the USA.

What's in the Kit?

  • Upper Ball Joints
  • Lower Ball Joints
  • Ball Joint Wrench
Contents of the MetalCloak JL Wrangler & JT Gladiator Baller Joints HD Knurled Ball Joints kit, including the upper ball joints, lower ball joints, and ball joint wrench.

TECHNICAL SPECIFICATIONS



Items Details
Compatibility 2018+ JL Wrangler & 2020+ JT Gladiator
Upper Ball Joint Cap 6061 Aluminum Hex
Upper Ball Joint Spindle Chromoly Steel
Upper Ball Joint Housing 1045 Steel
Lower Ball Joint Cup 1045 Steel
Lower Ball Joint Spindle Chromoly Steel
Ball Joint Wrench 3/16" Hot-Rolled Steel
Coating Gold Zinc | Clear Zinc | Black Anodized


INSTALLATION



Difficulty Moderate
Body Modification None
Time to Install 4-5 Hours


Fitment & Specifications

Brand Metal Cloak
Product Type Joints & Bushings
Vehicle Fitment Jeep Wrangler JL, Jeep Gladiator JT
Part Number 1914
Metal Cloak Jeep JL Wrangler, JT Gladiator, Knurled Baller Joints™, HD Ball Joints, Full Set

$699.00

Questions about this part?
Call the shop.