Metal Cloak Jeep JT Gladiator Bolt-On Rear Long Arm Upgrade Kit

Skip to product information
1 of 5
Regular price $1,909.00
Sale price $1,909.00 Regular price
Shipping calculated at checkout.

Want it installed?

Our techs can fit it at the shop in Vancouver, WA. Book an install or call (360) 440-6375.

The "Bolt-On" JT Gladiator Rear Long Arm System provides the most consistent wheelbase measurements throughout the suspension cycle along with improved pinion angle.

Features Include:

  • Fits Jeep JT Gladiator
  • 2 Frame-Mounted Control Arm Brackets
  • 2 Axle-Mounted Control Arm Brackets
  • 2 Upper Long Arm Duroflex Control Arms - 1.5" OD x 3/16" Wall DOM Steel
  • 2 Lower Long Arm Duroflex Control Arms - 2.0" OD x 1/4" Wall DOM Steel
  • Gold Zinc Plated for Protection Against the Elements
  • All Required Hardware
  • Made In The USA
If you want to switch your suspension to rear long arms, MetalCloak provides you with everything you need. Thick 2.0" OD x 1/4" wall DOM steel lower control arms provide the strength to take abuse, with forged threaded ends for the ultimate in durability. Upper control arms are 1.5" OD x 3/16" wall DOM steel, formed to provide clearance for up and down travel. Upper and lower control arms utilize patented Duroflex™ joints (metalcloakpatents.com) for bind-free, service-free articulation. The Duroflex joints are made with DuPont™ Kevlar® fiber, the first Jeep suspension components manufactured with Kevlar® for industry-leading durability.

Rear "Bolt-On" control arm brackets are formed of 1/4" steel plate and angled to slide over obstacles without catching.

The rear axle control arm brackets improve drivability in your lifted JT Gladiator Jeep Truck by reducing the angle of the upper control arms AND correcting pinion angle issues with optimal driveline phase. The gusseted, solid-welded, 1-piece 3/16" Hot-Rolled steel plate brackets ensure strength where you need it.

This system requires cutting off the factory rear control arm brackets and is for the rock crawler that demands precision when it comes to wheelbase and pinion angles.

MetalCloak's Rear Long Arm System features our best high-speed handling properties for on- and off-road and will increase a CTI score over a similar-height DB3 system. The "Bolt-On" Rear Long Arm System is made in the USA.

The Rear Long Arm Kit is finished in MetalCloak's signature gold zinc to protect it against the elements and provide a long-lasting, durable finish.

MetalCloak components have been proven safe with the FMVSS certificate of safety configured with 37" tires, full body armor and suspension lift.

Note: Fitment for 2026 models has not been confirmed.

Note: MetalCloak recommends you have a suspension specialist align your Jeep once MetalCloak suspension is installed.

System Customization: This item is being offered as a complete system that contains all the components shown. We cannot customize, replace or remove a component from the kit. If you need a custom order, all components are available individually and our sales team is happy to help you place your order.

System Components: If you purchase this system and decide you do not need a component or part of the system, we cannot accept returns.



VIDEOS

MetalCloak's Jeep Suspension is the proven leader among production suspension systems

Duroflex Joint Maintenance

It's time for The MetalCloak Minute... where we answer frequently asked questions in about a minute. Today's topic: Joint Maintenance.

Duroflex Joint Revealed

The MetalCloak Duroflex Joint gives better dampening properties over OEM style rubber Clevite Joints and provides more misalignment than "other" inferior Flex Joints.

Vibration Dampening

We tested our Duroflex Joint using a "Shaker Table" and seismometer app to show how much vibration dampening the Duroflex Joint gives you compared to other industry-leading joints.

A Comparison of Flex

Comparing the Flex of the Duroflex Joint with that of the Johnny Joint, the Teraflex Monster and the typical Clevite.

What is Corner Travel Index?

Since 2014 MetalCloak has tested thousands and thousands of rigs at events all across the country collecting specs on the build and cataloging the results. The data collected allows us to make our own products better.

FMVSS 126 Compliant

MetalCloak not only has the best off-road flex, but we are also Federal Motor Vehicle Safety Standard 126 certified and compliant. No other company can match our on- and off-road performance.

Why Gold Zinc?

It's time for The MetalCloak Minute... where we answer frequently asked questions in about a minute. Today's topic: Gold Zinc.

THE TECH

IT ALL STARTS WITH THE BUSHINGS

The Patented Duroflex™ Joint (metalcloakpatents.com) is the key to getting the greatest flex in a bolt-on suspension kit. Period.

A graphical comparison of an OEM Clevite plus a typical Flex Joint equaling a MetalCloak Duroflex Joint.

MetalCloak has taken the best features of the most widely used control arm joints and combined those features to create the Duroflex Joint, producing a Low-Maintenance, High-Misalignment (34°), Self-Centering, Rebuildable Joint with an OEM quality ride.

Now with Kevlar!

Black Duroflex bushing enhanced with Kevlar, with a metal core.

DuPont™ Kevlar® Fiber is now compounded in the proprietary elastomer of the Duroflex Bushing, bringing even more strength, durability and performance.

Kevlar® is a synthetic fiber with an extremely high tensile strength-to-weight ratio… five times stronger than steel and commonly used in bulletproof armor applications.

Duroflex Bushings w/Kevlar® can be identified by the MetalCloak "M" located on the outer surface.

Control Arm Duroflex Joint Alignment...

At MetalCloak we take the care to build every product right.

Most manufacturers build their control arms misaligned from center. Why? It simply costs less to do so.

By not cutting any corners, our joints are Centered and Aligned reducing wear and improving performance.

It makes them easier to install, too!

Comparison of three control arm joint alignments: MetalCloak centered OEM alignment, misaligned, and parallel offset.

Threaded Forged Ends

Close-up of a metallic forged end with threading and hexagonal nut, on a blurred background.

Forged for Strength...

The adjustable threaded ends are forged, providing a 37% higher fatigue strength over inferior cast parts; this EXTRA rock-bashing strength will hold up to whatever you throw at it.

Control Arm Specs

JT Gladiator Rear Upper Control Arms (SKU #7711)

  • CNC Formed
  • 3/16" Wall DOM Steel
  • 1.5" OD
  • Threaded Forged Ends
  • Precision Locking Nut
  • Gold Zinc Plated
  • Duroflex Joint at Both Ends
Technical diagram of the JT Gladiator upper rear Duroflex long arm control arm with dimensions and specifications.

JT Gladiator Rear Lower Control Arms (SKU #7712)

  • CNC Formed
  • 1/4" Wall DOM Steel
  • 2.0" OD
  • Threaded Forged Ends
  • Precision Locking Nut
  • Gold Zinc Plated
  • Duroflex Joint at Both Ends
Technical diagram of the JT Gladiator lower rear Duroflex long arm control arm with dimensions and specifications.

Degrees of Articulation

MetalCloak's Duroflex Joint provides 28° more articulation and flex than typical control arms! (Learn More About Duroflex Control Arms)

Illustration of a Dual Duroflex Control Arm with 68° maximum articulation and angular movement indicators. Diagram of a Clevis/Flex Joint Control Arm with 40° articulation range annotations.

Rear Frame Long Arm Brackets

This system requires cutting off the factory rear control arm brackets and is for the rock crawler that demands precision when it comes to wheelbase and pinion angles. The Rear Long Arm System comes with rear "Bolt-On" control arm brackets that are formed of 1/4" steel plate and angled to slide over obstacles without catching.

Two gold zinc rear long arm mounts with protruding flag nuts on white background.

Rear Axle Upper Control Arm Correction Brackets

Close-up of a black rear axle with a gold control arm bracket, mounted to the factory rear lower control arm bracket, with both the upper and lower control arms installed to the bracket.

Improve the drivability in your lifted JT Gladiator Jeep Truck by reducing the angle of your control arms AND correcting pinion angle issues. The control arm brackets bolt into factory locations for ease of installation and are gold zinc plated for a durable, long-lasting finish.

  • Flattened Control Arm Angles
  • Corrected Pinion Angle
  • 3/16" Hot-Rolled Steel Plate
  • Fully Welded 1-Piece Design
  • Gusseted And Boxed-In for Strength

What's in the Kit?

  • Upper Rear Long Arms
  • Lower Rear Long Arms
  • Rear Frame Long Arm Brackets
  • Rear Axle Upper Control Arm Correction Brackets
  • All Required Hardware
Contents of the MetalCloak JT Gladiator Rear Long Arm System kit, including the upper rear long arms, lower rear long arms, rear frame long arm brackets, rear axle upper control arm correction brackets, and all required hardware.

TECHNICAL SPECIFICATIONS



Items Details
Compatibility 2020+ JT Gladiator
Control Arms 1.5" OD x .187" Wall DOM Steel Tubing
2.0" OD x .25" Wall DOM Steel Tubing
Duroflex Joint Proprietary Vulcanized Elastomer made with DuPont™ Kevlar® fiber
Rear Frame Long Arm Brackets 1/4" Steel Plate
Rear Axle Upper Control Arm Correction Brackets 3/16" Hot-Rolled Steel Plate
Coating Gold Zinc


IMPORTANT NOTES



Fitment: Fitment for 2026 models has not been confirmed.

Suspension Alignment: MetalCloak recommends you have a suspension specialist align your Jeep once MetalCloak suspension is installed.

System Customization: This item is being offered as a complete system that contains all the components shown. We cannot customize, replace or remove a component from the kit. If you need a custom order, all components are available individually and our sales team is happy to help you place your order.

System Components: If you purchase this system and decide you do not need a component or part of the system, we cannot accept returns.

INSTALLATION



Difficulty Moderate
Body Modification Cutting & Drilling
Time to Install 6-8 Hours


Fitment & Specifications

Brand Metal Cloak
Product Type Control Arms & Links
Vehicle Fitment Jeep Gladiator JT
Part Number 7713
Metal Cloak Jeep JT Gladiator Bolt-On Rear Long Arm Upgrade Kit

$1,909.00

Questions about this part?
Call the shop.