Metal Cloak Jeep TJ / YJ / XJ / MJ / ZJ D30/D44 Knurled Baller Joints™, HD Ball Joints, Full Set
Couldn't load pickup availability
Want it installed?
Our techs can fit it at the shop in Vancouver, WA. Book an install or call (360) 440-6375.
Shop safely
Secure your shopping experience with various safe and trusted payment methods.
"BALLER" Informal adjective: extremely good, impressive or excellent.
MetalCloak's Baller Joints™ HD Knurled Ball Joints for Jeep TJ/YJ/XJ/MJ/ZJ D30/D44 axles are specifically engineered for worn or oversized axle C bores where standard ball joints may no longer maintain the proper press fit. Precision knurled housing increases retention inside the axle C to help restore a secure fit without replacing the housing.
These are the ONLY ball joints that combine premium materials with every top-tier feature in one complete package. Upper and Lower Load Bearing, Captured, Fully Sealed, Adjustable, In-Jeep rebuildable and made in the USA.
Features Include:
- Fits 1997-2006 TJ Wrangler, 1987-1995 YJ Wrangler, 1984-2001 XJ Cherokee, 1986-1992 MJ Comanche & 1993-1998 ZJ Grand Cherokee D30/D44
- Load Bearing Upper & Lower Joints
- Knurled Housing for Worn or Oversized Axle C Bores
- Increased Press-Fit Retention Strength
- Hardened Steel Races
- Induction-Hardened Chromoly Spindle & Ball
- Composite Bushing for Radial Loads (Side to Side Movement)
- Fully Sealed Top & Bottom O-Ring AND Shaft Wiper Seals
- Recessed Zerk Fittings for Easy Service/Grease
- Adjustable Pre-Load for Upper & Lower Joints
- MetalCloak Lock-Ring Wrench Included
- In-Jeep Rebuildable Upper & Lower
- Gold Zinc, Clear Zinc & Anodized Black Finish
- Made in the USA
MetalCloak ball joints start with a Chromoly spindle & ball with an induction-hardened surface strength that resists wear and provides a maximized bearing area to distribute force loads. The material offers superior ability to absorb energy without fracture over inferior materials.
The precision-machined knurled housing helps compensate for slightly enlarged or worn ball joint bores commonly found in high-mileage or heavily abused axles. This increased interference fit helps reduce unwanted movement inside the axle C and improves overall ball joint retention.
Composite bearing sleeves slide over the spindle to handle shock loads and are highly resistant to deformation. Ball and spindle are both load bearing and utilize metal-on-metal strength captured with Tool Steel Races that eliminate memory steer and provide long-lasting durability.
Both upper and lower joints are adjustable for preload tension, have recessed zerk fittings for servicing and are sealed with multiple Buna-N Rubber O-Rings along with shaft wiper seals to keep contaminants out and grease in.
Aluminum lock nuts and threaded top caps capture the joints so there is no possibility of pulling the joints out of the C.
Anodized black aluminum with Silver and Gold Zinc steel plated components highlight the quality and craftsmanship and are sure to let others know you appreciate American-made quality and top-notch performance. The ONLY joints that are Sealed, Captured, Adjustable and In-Jeep rebuildable; the last ball joints you will ever need.
Like other ball joints, only better.
Note: The TJ Baller Joints do NOT work with RCV Axles.
VIDEOS
MetalCloak's Jeep Wrangler Accessories
Why Gold Zinc?
It's time for The MetalCloak Minute... where we answer frequently asked questions in about a minute. Today's topic: Gold Zinc.
Proudly Made in the USA
MetalCloak proudly manufactures products in America. Take a glimpse of our incredible team that lives and breathes innovation and quality.
THE TECH
Upper & Lower Knurled Upgraded Ball Joints

MetalCloak's Baller Joints™ HD Knurled Ball Joints for Jeep TJ/LJ/YJ/XJ/MJ/ZJ D30/D44 axles are specifically engineered for worn or oversized axle C bores where standard ball joints may no longer maintain the proper press fit. Precision knurled housing increases retention inside the axle C to help restore a secure fit without replacing the housing.
MetalCloak offers the ONLY ball joints that are comprised of top-level materials with ALL the best features contained in one package; this is the last ball joint you will need. Upper and Lower Load Bearing, Captured, Fully Sealed, Adjustable, In-Jeep rebuildable and made in the USA.
Upper Ball Joint Upgrade
(Give it a spin to see a 360 view)
Upper Ball Joint Diagram
Load Bearing Joints
Pre-load on the upper ball joint diverts force loads from the lower joint and shares the load between both pivot locations.
Thread Together Captured Design
Ball joints press in from the bottom of the C, then the aluminum lock nut and thread-on top cap capture the joints so there is no possibility of pulling the joints out.

Shaft & Ball Benefits

MetalCloak ball joints start with a Chromoly spindle & ball with induction-hardened surface strength that resists wear, with superior ability to absorb energy without fracture over inferior materials, while providing a maximized bearing area to distribute force loads.
Bearing Races
The Concave Bearing Races are high-impact, shock-resistant, machined and heat-treated S-7 tool steel with maximum surface contact to spread force loads; this allows more pre-load relief while still resisting memory steer.

Lower Ball Joint Upgrade
(Give it a spin to see a 360 view)
Lower Ball Joint Diagram
Ball Joint Wrench

The included wrench is specially designed and laser-cut to precisely fit the lower ball joint and allows for ease of maintenance. The wrench is made of laser-cut 3/16" hot-rolled steel and is finished in gold zinc for a classic premium look and long-lasting MetalCloak quality.
Made in America
The MetalCloak Upper and Lower Ball Joints are made right here in the USA.

What's in the Kit?

- Upper Ball Joints
- Lower Ball Joints
- Ball Joint Wrench
TECHNICAL SPECIFICATIONS
| Items | Details |
|---|---|
| Compatibility | 1997-2006 TJ Wrangler, 2004-2006 LJ Wrangler Unlimited, 1987-1995 YJ Wrangler, 1984-2001 XJ Cherokee, 1986-1992 MJ Comanche & 1993-1998 ZJ Grand Cherokee D30/D44 |
| Upper Ball Joint Cap | 6061 Aluminum Hex |
| Upper Ball Joint Spindle | Chromoly Steel |
| Upper Ball Joint Housing | AISI 1045 Steel |
| Lower Ball Joint Cup | AISI 1045 Steel |
| Lower Ball Joint Spindle | Chromoly Steel |
| Ball Joint Wrench | 3/16" Hot-Rolled Steel |
| Coating | Gold Zinc | Clear Zinc | Black Anodized |
IMPORTANT NOTES
RCV Axles: The TJ Baller Joints do NOT work with RCV Axles.
INSTALLATION
| Difficulty | Moderate |
| Body Modification | None |
| Time to Install | 4-5 Hours |
Fitment & Specifications
| Brand | Metal Cloak |
|---|---|
| Product Type | Joints & Bushings |
| Vehicle Fitment | Jeep Wrangler TJ, Jeep Wrangler LJ, Jeep Wrangler YJ, Jeep Cherokee XJ, Jeep Comanche MJ, Jeep Grand Cherokee ZJ |
| Part Number | 1915 |

$699.00