Metal Cloak JK Wrangler Front 4-Link System - Base Kit

Skip to product information
1 of 6
Regular price $1,267.00
Sale price $1,267.00 Regular price
Shipping calculated at checkout.

Want it installed?

Our techs can fit it at the shop in Vancouver, WA. Book an install or call (360) 440-6375.

The Front Four Link Long Arm System provides the most consistent wheelbase measurements throughout the suspension cycle, along with improved pinion angles for your Jeep.

Features Include:

  • Fits 2007-2018 JK Wrangler & Wrangler Unlimited
  • Frame-Mounted Lower Control Arm Brackets (1/4" Steel)
  • 2 Upper Long Arm Duroflex™ Control Arms (1.5" OD x 9/32" Wall DOM)
  • 2 Lower Long Arm Duroflex™ Control Arms (2.0" OD x 1/4" Wall DOM)
  • Choice Between Bolt-On or Weld-On Upper Arm Mounts
  • Gold Zinc Protection
  • All Required Hardware
  • Made in the USA
If you want to convert your front mid-arm suspension to front long arms, MetalCloak provides everything you need to complete the job. Thick 2.0" OD x 1/4" wall DOM steel lower control arms provide strength that can take abuse, with forged threaded ends for the ultimate in durability. The upper control arms are 1.5" OD x 9/32" wall DOM and are formed to provide clearance for up- and down-travel. The upper and lower control arms utilize our patented Duroflex™ bushings for bind-free, service-free articulation.

Fitted with Duroflex™ Joints, the only vulcanized elastomer, self-centering joint enhanced with DuPont™ Kevlar® fiber – providing incredible durability with more misalignment in the control arms and better vibration dampening than anything else available. Exclusive to MetalCloak (see detailed info in the main body).

MetalCloak Front JK Long Arm Frame Mounts are used in replacement of the factory mounts when installing the front lower control arms for a long arm suspension. Fully welded and boxed for strength, the 1/4" steel brackets are low profile for clearance and are finished in gold zinc for a long-lasting finish.

Choose between the Upper Front Long Arm Bolt-On OR Weld-On Mounts. The upper front mounts are fully welded and boxed for strength, and the 1/4" hot-rolled steel brackets are low profile for clearance. The Bolt-On brackets come in MetalCloak's signature gold zinc, while the Weld-On mounts come in raw metal for your own custom finish. The choice is yours!

This system requires cutting off the factory front control arm brackets and is for the off-roader that demands precision when it comes to wheelbase and pinion angles.

MetalCloak's Front Long Arm features our best high-speed handling properties for on- and off-road, and the Front Four Link Long Arm System is made in the USA.

Note: Exhaust modification may be required on all 2007-2011 JK Wranglers to install this kit to clear the lower front control arm mounts.

Note: This suspension requires an Exhaust Loop Bypass Pipe on 2012+ JK Wranglers.

Note: We recommend you have a suspension specialist align your Jeep once a MetalCloak suspension is installed.

Note: This item is being offered as a complete system that contains all the components shown. We cannot customize, replace or remove a component from the kit. If you need a custom order, all components are available individually and our sales team is happy to help you place your order.

Note: If you purchase this system and decide you do not need a component or part of the system, we cannot accept returns.



VIDEOS

MetalCloak's Jeep JK Wrangler Suspension Systems are the proven leader among production suspension systems

Duroflex 101

This short video covers what you need to know about the basics of the Duroflex Joint. How it should be used and what to expect when using it.

Why Gold Zinc?

It's time for The MetalCloak Minute, where we answer frequently asked questions in about a minute. Today's topic: Gold Zinc.

Duroflex Joint Maintenance

It's time for The MetalCloak Minute, where we answer frequently asked questions in about a minute. Today's topic: Joint Maintenance.

Duroflex Joint Revealed

The MetalCloak Duroflex Joint gives better dampening properties over OEM style rubber Clevite Joints and provides more misalignment than "other" inferior Flex Joints.

Vibration Dampening

We tested our Duroflex Joint using a "Shaker Table" and seismometer app to show how much Vibration Dampening the Duroflex Joint gives you compared to other industry-leading joints.

A Comparison of Flex

Comparing the Flex of the Duroflex Joint with that of the Johnny Joint, the Teraflex Monster and the typical Clevite.

FMVSS 126 Compliant

MetalCloak not only has the best off-road flex, but we are also Federal Motor Vehicle Safety Standard 126 certified and compliant. No other company can match our on- and off-road performance.

What is Corner Travel Index?

Since 2014, MetalCloak has tested thousands and thousands of rigs at events all across the country collecting specs on the build and cataloging the results. The data collected allows us to make our own products better.

THE TECH

IT ALL STARTS WITH THE BUSHINGS

The Patented Duroflex™ Joint (metalcloakpatents.com) is the key to getting the greatest flex in a JK Wrangler bolt-on suspension kit. Period.

A graphical comparison of an OEM Clevite plus a typical Flex Joint equaling a MetalCloak Duroflex Joint.

MetalCloak has taken the best features of the most widely used control arm joints and combined those features to create the Duroflex Joint, producing a Low-Maintenance, High-Misalignment (34˚), Self-Centering, Rebuildable Joint with an OEM quality ride.

Now with Kevlar!

DuPont™ Kevlar® Fiber is now compounded in the proprietary elastomer of the Duroflex Bushing, bringing even more strength, durability and performance.

Kevlar® is a synthetic fiber with an extremely high tensile strength-to-weight ratio…five times stronger than steel and commonly used in bulletproof armor applications.

Duroflex Bushings w/Kevlar® can be identified by the MetalCloak "M" located on the outer surface.

Black Duroflex bushing enhanced with Kevlar, with a metal core.

Control Arm Duroflex Joint Alignment...

Comparison of three control arm joint alignments: MetalCloak centered OEM alignment, misaligned, and parallel offset.

At MetalCloak we take the care to build every product right.

Most manufacturers build their control arms misaligned from center. Why? It simply costs less to do so.

By not cutting any corners, our joints are Centered and Aligned reducing wear and improving performance.

It makes them easier to install, too!

Lower Front 4-Link Long Arms

The Lower Front Control Arms are precision-engineered for our 4-link front suspension. Mounted using a bolt-on bracket, the control arms are designed for lift heights of 4.5" and up, provide amazing flex, the best pinion angle control for taller lifts, and still give incredible handling and the smoothest ride on- or off-road.

Two gold zinc lower front control arms with Duroflex joints on each end.

Upper Front 4-Link Long Arms

Two gold zinc upper front long arm control arms with a Duroflex joint on one end and a clevis bracket on the other.

The Upper Front Control Arms are installed using a welded-on bracket for precise geometry.

Equipped with the Duroflex™ joints at the frame end, the arms use the stock bushings or the MetalCloak Bushing Upgrade Kit (not included) at the axle end.

Threaded Forged Ends

Forged for Strength...

The adjustable threaded ends are forged, providing a 37% higher fatigue strength over inferior cast parts; this EXTRA rock bashing strength will hold up to whatever you throw at 'em.

Close-up of a metallic forged control arm end with threading and a hexagonal nut.

Control Arm Specs

JK Wrangler Lower Front (SKU #7224)

  • CNC Machined
  • 1/4" Wall DOM Steel
  • 2.0" OD
  • Threaded Forged Ends
  • Precision Locking Nut
  • Gold Zinc Plated
  • Duroflex Joint at Both Ends
Technical diagram of the JK Wrangler lower front Duroflex long arm with dimensions and specifications.

JK Wrangler Upper Front (SKU #7291)

  • CNC Machined
  • 9/32" Wall DOM Steel
  • 1.5" OD
  • 1/4" Steel Clevis
  • Precision Locking Nut
  • Gold Zinc Plated
  • Threaded Forged Ends
  • Duroflex Joint
Technical diagram of the JK Wrangler upper front Duroflex long arm with dimensions and specifications.

Degrees of Articulation

MetalCloak's Duroflex Joint provides 28˚ more articulation and flex than typical control arms! (Learn More About Duroflex Control Arms)


Illustration of a Dual Duroflex Control Arm with 68° maximum articulation and angular movement indicators. Diagram of a Clevis/Flex Joint Control Arm with 40° articulation range annotations.

Bolt-On Upper Control Arm Mounts (Option 1)

Rendering of the gold zinc lower front long arm frame mounts secured on a Jeep frame with a gold zinc long arm attached.

The Lower Front Long Arm Mounts are high clearance and tuck up under the Jeep to keep from hanging on obstacles on the trail. Simple bolt-on installation with no welding required.

  • 1/4" Hot-Rolled Steel
  • Signature Gold Zinc Chromate

Made strong and made to last!

Weld-On Upper Control Arm Mounts (Option 2)

WELD-ON Upper Front Long Arm Mounts provide new mounting locations for MetalCloak Upper Control Arms for the Jeep JK Wrangler; perfect for those who would rather attach by welding vs bolting on.

  • 1/4" Hot-Rolled Steel
  • Weld-On
  • Comes Raw for Custom Finish

Made strong and made to last!

Two raw steel weld-on upper control arm brackets with hardware on a white background.

What's in the Kit?

Contents of the MetalCloak JK Wrangler Front Four Link Long Arm Set kit, including the lower and upper front 4-link control arms, lower control arm mounts and hardware.
  • Front Lower 4-Link Control Arms
  • Front Upper 4-Link Control Arms
  • Front Lower Control Arm Mounts
  • All Required Hardware
  • Bolt-On OR Weld-On Upper Control Arm Mounts (Depending on Option Chosen)

TECHNICAL SPECIFICATIONS



Items Details
Compatibility 2007-2018 JK Wrangler & Wrangler Unlimited
Front Upper Control Arms 1.5" OD x 9/32" Wall DOM Steel Tubing
Front Lower Control Arms 2.0" OD x 1/4" Wall DOM Steel Tubing
Front Lower Control Arm Bracket 1/4" Hot-Rolled Steel
Duroflex Joint Proprietary Vulcanized Elastomer Made With DuPont™ Kevlar® Fiber
Front Upper Control Arm Bracket (Bolt-On) 1/4" Hot-Rolled Steel
Front Upper Control Arm Bracket (Weld-On) 1/4" Hot-Rolled Steel
Coating Gold Zinc


IMPORTANT NOTES



Exhaust Modification: Exhaust modification may be required on all 2007-2011 JK Wranglers to install this kit to clear the lower front control arm mounts.

Exhaust Loop: This suspension requires an Exhaust Loop Bypass Pipe on 2012+ JK Wranglers.

Suspension Alignment: We recommend you have a suspension specialist align your Jeep once a MetalCloak suspension is installed.

System Customization: This item is being offered as a complete system that contains all the components shown. We cannot customize, replace or remove a component from the kit. If you need a custom order, all components are available individually and our sales team is happy to help you place your order.

System Components: If you purchase this system and decide you do not need a component or part of the system, we cannot accept returns.

INSTALLATION



Difficulty Difficult
Body Modification Cutting & Welding (Depending on Option Chosen)
Time to Install 10-12 Hours


Fitment & Specifications

Brand Metal Cloak
Product Type Control Arms & Links
Vehicle Fitment Jeep Wrangler JK
Part Number 7278
Metal Cloak JK Wrangler Front 4-Link System - Base Kit

$1,267.00

Questions about this part?
Call the shop.