Metal Cloak JL/JT RockSport Axle Disconnect Skid Plate Upgrade Kit
Couldn't load pickup availability
Want it installed?
Our techs can fit it at the shop in Vancouver, WA. Book an install or call (360) 440-6375.
Shop safely
Secure your shopping experience with various safe and trusted payment methods.
Replace the weak factory skid cover on the center axle disconnect for your Jeep JL Wrangler or JT Gladiator Truck and upgrade from the small factory steering damper with a specifically tuned RockSport RED Steering Stabilizer; the stabilizer mounts relocate the damper up and out of harm's way.
Features Include:
- CAD/FAD Skid Plate
- Black Anodized Billet Aluminum Tie Rod Mount
- Axle Side Damper Mount
- RockSport Specifically Tuned Steering Damper
- 3/16" Laser-Cut Steel
- Gold Zinc Finish
- Made In The USA
The tie rod mount is a two-piece aluminum billet design, is simple to install, and allows you to position the stabilizer for maximum performance. Finished in anodized black with a laser-engraved "M" around the recessed bolt holes for a clean and custom look.
Note: Minimum 2" lift required.
Note: The RockSport steering stabilizer kit works with left-hand drive applications only.
Note: Raised steering stabilizer requires at least 2" of bump stop to clear frame.
Note: The billet tie rod mount does NOT work with factory tie rod.
Note: MetalCloak highly recommends using anti-seize on all billet tie rod mount bolts.
VIDEOS
MetalCloak's Jeep JL Wrangler & JT Gladiator Suspension
RockSport Axle Disconnect Skid Upgrade Kit
This short video covers what you need to know about the Jeep JL Wrangler and JT Gladiator RockSport Front Axle Disconnect Skid Upgrade Kit.
What is Corner Travel Index?
Since 2014 MetalCloak has tested thousands and thousands of rigs at events all across the country collecting specs on the build and cataloging the results. The data collected allows us to make our own products better.
FMVSS 126 Compliant
MetalCloak not only has the best off-road flex, but we are also Federal Motor Vehicle Safety Standard 126 certified and compliant. No other company can match our on- and off-road performance.
Why Gold Zinc?
It's time for The MetalCloak Minute... where we answer frequently asked questions in about a minute. Today's topic: Gold Zinc.
THE TECH
Front Axle Disconnect Skid Plate
The JL Wrangler & JT Gladiator have a low hanging axle disconnect box located off the rear side of the front axle on the passenger side. This system comes with a 3/16" Skid Plate to protect this important piece of equipment and Steering Stabilizer Relocation (S/R) brackets to move the stabilizer up and out of harm's way.
- CAD-Designed, CNC-Formed
- 3/16" Steel
- Gold Zinc Plated
- Secured With 5 Factory Locations
- Laser-Cut "M" For Extra Style Points
- Stabilizer Relocation Brackets Included

Billet Tie Rod Mount

The MetalCloak Billet Steering Stabilizer Tie Rod Mount is designed for the MetalCloak JK Wrangler, JL Wrangler & JT Gladiator Tie Rod. The billet clamp is fitted for 1.625" outer diameter.
- CNC Aluminum Billet
- Two-Piece Design
- Recessed Bolt Locations
- Laser-Engraved "M" Logo
- Black Anodized Finish
Steering Stabilizer Axle Side Mount
The MetalCloak Steering Stabilizer, Axle Side Mount relocates the axle side of the steering stabilizer to better protect the steering stabilizer from debris by moving the stabilizer up and out of harm's way from where the factory steering stabilizer is mounted. Simple to install using existing factory holes for a bolt-on application. The steering stabilizer axle side mount requires a minimum 2" lift.
RockSport Steering Stabilizer
The RockSport RED JL/JT Steering Stabilizer is specifically tuned for Jeep applications and will reduce bump-steer and vibration better than the OE factory part.
Designed for the rigors of a lifted Jeep that is equipped with oversized off-road tires, the RockSport RED Steering Stabilizer is a fantastic upgrade for Jeeps that stay on the road or go all out when off-roading.
This will reduce the damaging vibration that shortens the life of ball joints, bushings, and other front end components.

The MetalCloak JL/JT Steering Stabilizer Axle Side Mount moves the stabilizer higher and away from its factory location, keeping it out of harm's way and better protected from trail debris. It bolts on using the existing factory holes for a quick, simple install.
What's in the Kit?

- Front Axle Disconnect Skid Plate
- RockSport Steering Stabilizer
- Billet Tie Rod Mount
- Axle Mount
- All Required Hardware
TECHNICAL SPECIFICATIONS
| Items | Details |
|---|---|
| Compatibility | 2018+ JL Wrangler & 2020+ JT Gladiator (Minimum 2" Lift Required) |
| Front Axle Disconnect Skid Plate | 3/16" Hot-Rolled Steel Plate |
| Tie Rod Mount | 2" x 3" 6061-T6 Aluminum Black Anodized |
| Stabilizer Mount | 3/16" Hot-Rolled Steel Plate |
| Stabilizer Valving | 9-Stage Coil Spring |
| Stabilizer Piston Rod | 14mm (stronger than stock) |
| Stabilizer Elastomer Dust Boot | Protects from stone damage |
| Stabilizer Piston & Bore | 35mm (increased oil volume) |
| Stabilizer Tube Design | Twin Tube (Protects internals against stone damage) |
| Stabilizer Lip Seal | Multiple Seal (prevents oil loss) |
| Coating | Gold Zinc |
IMPORTANT NOTES
Factory Tie Rod: The billet tie rod mount does NOT work with factory tie rod.
Requirements: Minimum 2" lift required.
Left-Hand Drive: The RockSport steering stabilizer kit works with left-hand drive applications only.
Clearance: Raised steering stabilizer requires at least 2" of bump stop to clear frame.
Billet Mount: MetalCloak highly recommends using anti-seize on all bolts.
INSTALLATION
| Difficulty | Easy |
| Body Modification | None |
| Time to Install | 1-2 Hours |
Fitment & Specifications
| Brand | Metal Cloak |
|---|---|
| Product Type | Skid Plates & Armor |
| Vehicle Fitment | Jeep Wrangler JL, Jeep Gladiator JT |
| Part Number | 6374 |

$344.00