Metal Cloak JL Wrangler & JT Gladiator 1350 Front Driveshaft

Skip to product information
Regular price $899.00
Sale price $899.00 Regular price
Shipping calculated at checkout.

Want it installed?

Our techs can fit it at the shop in Vancouver, WA. Book an install or call (360) 440-6375.

The Heavy-Duty Front Driveshaft is a tremendous upgrade over stock, increasing strength and providing the features you need for lifted applications on Jeep JL Wranglers & JT Gladiators.

Features Include:

  • Fits 2018+ JL Wrangler (Except 4xE) & 2020+ JT Gladiator
  • 2" Diameter Increases Clearance
  • Pre-Balanced & Pre-Measured
  • Serviceable Slip Shafts
  • 1350 Double Cardan Joints
  • Zerk Fittings for Grease
  • All Required Hardware
  • Made in the USA
2" outer diameter provides needed clearance at the crossmember and exhaust and increases durability with a thicker wall. The pre-balanced and pre-measured driveshafts are built to the correct length for each lift height.

Slip shafts are serviceable and have internal seals instead of the vulnerable "accordion" boot that comes on stock Jeeps.

The constant velocity driveshaft is specially designed for MetalCloak Suspension Systems. It features strong 1350 double cardan universal joints and grease zerks for easy servicing, and provides vibration-free movement with incredible durability. It is made in the USA.

The driveshaft is ready for installation and comes with all the needed hardware and a replacement yoke.

Note: Does not fit 4xE JL Wranglers.



VIDEOS

MetalCloak's Jeep Wrangler Suspension

What is Corner Travel Index?

Since 2014, MetalCloak has tested thousands and thousands of rigs at events all across the country collecting specs on the build and cataloging the results. The data collected allows us to make our own products better.

THE TECH

JL Wrangler & JT Gladiator Front Driveshaft

Black front driveshaft on a white background.

The MetalCloak Front Driveshaft is 2" in diameter for better clearance of the crossmember and exhaust. The front driveshaft is pre-balanced and pre-measured for the correct length, and uses thicker tube material than stock for increased strength. This constant velocity driveshaft has been specially designed for MetalCloak Suspension Systems.

The USA-made double cardan 1350 universal joints with grease fittings provide vibration-free movement and incredible durability.

Close-up of the double cardan 1350 universal joint on the MetalCloak front driveshaft.
Close-up of a metallic driveshaft slip shaft with a black sealing component with internal seals.

Slip shafts are serviceable and have internal seals instead of the vulnerable "accordion" boot that comes on stock Jeeps.

When lifting a vehicle, the factory driveshaft can bind at the transfer case side, and the factory driveshaft is too short for additional travel. An aftermarket driveshaft clears the transfer case and is optimal for maximum travel.

An animation comparing a stock driveshaft to an upgraded one measuring 2 inches in clearance under a vehicle.

What's in the Kit?

Contents of the MetalCloak JL Wrangler & JT Gladiator Front Driveshaft kit, including the front driveshaft, replacement yoke and hardware.
  • (1) Front Driveshaft
  • (1) Replacement Yoke
  • All Required Hardware

TECHNICAL SPECIFICATIONS



Items Details
Compatibility 2018+ JL Wrangler (Except 4xE) & 2020+ JT Gladiator
Coating Black Paint


IMPORTANT NOTES



JL Wrangler 4xE: Does not fit JL Wrangler 4xE.

INSTALLATION



Difficulty Easy
Body Modification None
Time to Install 3-4 Hours


Fitment & Specifications

Brand Metal Cloak
Product Type Driveshafts
Vehicle Fitment Jeep Wrangler JL, Jeep Gladiator JT
Part Number 7202
Metal Cloak JL Wrangler & JT Gladiator 1350 Front Driveshaft

$899.00

Questions about this part?
Call the shop.