Metal Cloak JL Wrangler | JT Gladiator Heavy Duty Front Sway Bar Quick Disconnects, 2024+
Couldn't load pickup availability
Want it installed?
Our techs can fit it at the shop in Vancouver, WA. Book an install or call (360) 440-6375.
Shop safely
Secure your shopping experience with various safe and trusted payment methods.
The Jeep JL Wrangler & JT Gladiator Truck Heavy-Duty Front Sway Bar Quick Disconnects (11"-12" length) by MetalCloak bolt directly into the factory locations and allow for manual disconnect of the front sway bar.
Features Include:
- Fits 2024+ JL Wranglers & JT Gladiators
- Extended Length of 11"-12"
- 1" OD x .25" Wall DOM Steel
- Spherical Rod Ends For More Rigidity
- Massive 3/4" Mounting Pins
- Stronger & More Stable Than Standard End Links
- Adjustable on the Vehicle
- Designed for MetalCloak's 2.5"-5.5" Lifts
- Designed for Non-Electronic Sway Bar
- Bolt Plate & Stow Straps
- Bar Pin Quick Clips
- Gold Zinc Plated for Protection Against the Elements
- All Required Hardware
- Quick & Easy Installation
- Made In The USA
The heavy-duty disconnects are made of 1" OD x .25" wall DOM steel, providing a stronger, more stable end link than the standard links. The disconnects come with machined wrench flats and are double adjustable for easy micro-adjustments.
The quick disconnect rod ends have precision-ground, hard chrome plated spherical rod ends made of chromoly steel with a self-lubricating race that provides more rigidity and a much longer service life over end link bushings.
The end links come with a solid 3/8" laser-cut riser bracket, allowing easier access to the thick 3/4" mounting studs and attachment points.
The disconnects come with 4130 chromoly steel gold zinc mounting pins, bar pin clips for a quick release, and a sway bar disconnect bolt plate and stow straps that secure the sway bar and end links to the frame when wheeling.
MetalCloak heavy-duty quick release disconnects are bolt-on and fit without any cutting required. The front sway bar quick disconnects are designed to work in conjunction with MetalCloak's 2.5"-5.5" lifts.
MetalCloak components have been proven safe with the FMVSS certificate of safety configured with 37" tires, full body armor and suspension lift.
Note: For use with JL Wranglers & JT Gladiators NOT equipped with electronic sway bar disconnects.
Note: MetalCloak recommends you have a suspension specialist align your Jeep once MetalCloak suspension is installed.
VIDEOS
MetalCloak's Jeep Suspension
What is Corner Travel Index?
Since 2014 MetalCloak has tested thousands and thousands of rigs at events all across the country collecting specs on the build and cataloging the results. The data collected allows us to make our own products better.
FMVSS 126 Compliant
MetalCloak not only has the best off-road flex, but we are also Federal Motor Vehicle Safety Standard 126 certified and compliant. No other company can match our on- and off-road performance.
Why Gold Zinc?
It's time for The MetalCloak Minute... where we answer frequently asked questions in about a minute. Today's topic: Gold Zinc.
THE TECH
Heavy-Duty Sway Bar Quick Disconnects

The MetalCloak heavy-duty disconnects are made of 1" OD x .25" wall DOM steel, providing a stronger, more stable end link than standard links. The disconnects come with machined wrench flats and are double adjustable for easy micro-adjustments.
The quick disconnect rod ends have precision-ground, hard chrome plated spherical rod ends made of chromoly steel with a self-lubricating race that provides more rigidity and a much longer service life over end link bushings.
What's in the Kit?
- Front Sway Bar Disconnect Rods (2)
- Sway Bar Disconnect Riser Bracket (1)
- Sway Bar Disconnect Bolt Plates (2)
- Sway Bar Disconnect Rod Ends (4)
- Sway Bar Disconnect Mount Studs (4)
- Stow Straps (2)
- Lynch Pins (4)
- All Required Hardware

TECHNICAL SPECIFICATIONS
| Items | Details |
|---|---|
| Compatibility | 2024+ JL Wrangler & 2024+ JT Gladiator |
| Sway Bar Disconnect Rods | 1" OD x .25" Wall DOM A513 Steel |
| Sway Bar Disconnect Mount Studs | 1.25" x 4130 Steel |
| Sway Bar Disconnect Riser Bracket | 3/8" Hot-Rolled Steel |
| Sway Bar Disconnect Rod Ends | Chromoly Steel w/ Self-Lubricating Race |
| Coating | Gold Zinc |
IMPORTANT NOTES
Requirements: For use with JL Wranglers & JT Gladiators NOT equipped with electronic sway bar disconnects.
Suspension Alignment: MetalCloak recommends you have a suspension specialist align your Jeep once MetalCloak suspension is installed.
INSTALLATION
| Difficulty | Easy |
| Body Modification | None |
| Time to Install | 1 Hour |
Fitment & Specifications
| Brand | Metal Cloak |
|---|---|
| Product Type | Track Bars, Sway Bars & Bump Stops |
| Vehicle Fitment | Jeep Wrangler JL, Jeep Gladiator JT |
| Part Number | 7425 |

$426.00