Metal Cloak JT Gladiator, 3.5" True Dual Rate™ Coils, Rear
Couldn't load pickup availability
Want it installed?
Our techs can fit it at the shop in Vancouver, WA. Book an install or call (360) 440-6375.
Shop safely
Secure your shopping experience with various safe and trusted payment methods.
Jeep JT Gladiator Truck Rear True Dual Rate™ Coils are manufactured of high-tensile chrome-silicon steel alloy that surpasses the typical aftermarket coil springs in extended length, ride quality and long-lasting durability. These springs are made specifically for the JT Gladiator.
Features Include:
- Fits 2020+ JT Gladiator
- 3.5" Lift
- Two Rear True Dual Rate Coils
- Two Elastomer Coil Sleeves
- One of the Longest Free Lengths in the Industry
- Stays in Coil Buckets, Even at Full Droop
- Superior Ride Quality
- Excellent On- & Off-Road Stability
- Consistent Ride Height
- Resists Sagging
- Allows for Unbeatable Articulation
- Additional Coil Sleeves Dampen Coil Harmonics
Fit the MetalCloak Coil Sleeves on your True Dual Rate™ Coils along with the factory sleeves to minimize unwanted clatter or harmonics coming from your rear coils. The additional high-durometer elastomer sleeves isolate and dampen noises that may be caused when coil loops contact.
MetalCloak components have been proven safe with the FMVSS certificate of safety configured with 37" tires, full body armor and suspension lift.
Note: True Dual Rate Coils have been engineered to perform best with Duroflex control arms and 6Pak or RockSport shocks.
Note: MetalCloak does not recommend powder coating your True Dual Rate coils. The baking process in powder coating can, in some cases, cause the metallurgical properties of the coils to be changed, resulting in the loss of the lift properties of the coils. As such, the process of powder coating the coils will void any warranty stated or implied in relation to the coils.
Note: MetalCloak recommends you have a suspension specialist align your Jeep once MetalCloak suspension is installed.
VIDEOS
MetalCloak's Jeep Suspension
True Dual Rate Centered Coils 101
This short video covers all you need to know about MetalCloak's True Dual Rate Centered Coils.
MetalCloak True Dual Rate Coils vs Rock Krawler, Teraflex & Skyjacker
We take a deep dive into coil spring performance in this side-by-side comparison of MetalCloak's True Dual Rate coils against Rock Krawler, Teraflex, and Skyjacker options.
What is Corner Travel Index?
Since 2014 MetalCloak has tested thousands and thousands of rigs at events all across the country collecting specs on the build and cataloging the results. The data collected allows us to make our own products better.
FMVSS 126 Compliant
MetalCloak not only has the best off-road flex, but we are also Federal Motor Vehicle Safety Standard 126 certified and compliant. No other company can match our on- and off-road performance.
THE TECH
What are True Dual Rate Coils?
MetalCloak True Dual Rate™ Coils have one of the longest free lengths in the industry for greater articulation without sacrificing the OEM ride quality.
Without the advantage of the Dual Rate Design, the required Spring Rate would be too low and "squishy" -- just loading your Jeep up with supplies would affect ride height and quality.
True Dual Rate Coils Create A "Virtual" Bucket!
By effectively lowering the bucket on the coil, you get a much more stable ride that reduces the potential for buckling. (Learn More about True Dual Rate Coils)
True Dual Rate Coil Specifications
Spring Specifications
- Free Length: 21"
- Solid Height: 7.5"
- Lift: 3.5"
- Coating: Black Powder Coat

Rear Coil Sleeves

Fit the MetalCloak Coil Sleeves on your True Dual Rate™ Coils to dampen unwanted clatter or harmonics coming from your rear coils. The high-durometer elastomer isolates and quiets noise that may be caused when coil loops contact. These sleeves are to be used in addition to the factory coil sleeves.
What's in the Kit?
- Rear True Dual Rate Coils (2)
- Rear Coil Sleeves (2)

TECHNICAL SPECIFICATIONS
| Items | Details |
|---|---|
| Compatibility | 2020+ JT Gladiator |
| Lift | 3.5" |
| True Dual Rate Coils | High-Tensile Chrome-Silicon Steel |
| Rear Coil Sleeves | High-Durometer Elastomer |
| Coating | Black Powder Coat |
IMPORTANT NOTES
Performance: True Dual Rate Coils have been engineered to perform best with Duroflex control arms and 6Pak or RockSport shocks.
True Dual Rate Coils: MetalCloak does not recommend powder coating your True Dual Rate coils. The baking process in powder coating can, in some cases, cause the metallurgical properties of the coils to be changed, resulting in the loss of the lift properties of the coils. As such, the process of powder coating the coils will void any warranty stated or implied in relation to the coils.
Suspension Alignment: MetalCloak recommends you have a suspension specialist align your Jeep once MetalCloak suspension is installed.
INSTALLATION
| Difficulty | Easy |
| Body Modification | None |
| Time to Install | 1-2 Hours |
Fitment & Specifications
| Brand | Metal Cloak |
|---|---|
| Product Type | Coil Springs |
| Vehicle Fitment | Jeep Gladiator JT |
| Part Number | 7661 |

$339.00