Metal Cloak Sector Shaft Brace, JL Wrangler | JT Gladiator (2018-2023)

Skip to product information
1 of 4
Regular price $179.00
Sale price $179.00 Regular price
Shipping calculated at checkout.

Want it installed?

Our techs can fit it at the shop in Vancouver, WA. Book an install or call (360) 440-6375.

The Sector Shaft Brace for the 2018-2023 Jeep JL Wrangler and JT Gladiator provides additional strength to help protect against steering component and frame damage.

Features Include:

  • Fits 2018-2023 JL Wrangler & JT Gladiator
  • Made of 3/8" Steel Plate
  • Chromoly Laser-Engraved Sector Shaft Nut
  • High-Load Oil-Embedded Bronze Bushing
  • Service-Free (Self-Lubricating)
  • 100% Bearing Contact
  • Splits Force Loads To The Frame and Front Crossmember
  • CAD-Designed
  • Laser-Cut
  • Made In The USA
Supported at the vital sector shaft on your JL or JT, this brace provides additional protection to steering components with thick 3/8" formed steel. The sector shaft brace is CAD-designed, laser-cut, and attaches to the crossmember instead of adding additional force to an already stressed frame section that the track bar mounts to.

Mounting at the crossmember splits the force loads so they aren't carried by the Jeep frame alone, adding the strength of the crossmember.

Mounting the brace on the opposing side from the steering box keeps the box from being pulled away from the frame, relieves stress on the steering box bolts, and alleviates unwanted stress on the frame.

The high-load oil-embedded bronze bushing provides no wear points on its surface and gives 100% contact without the issues found with inferior braces using needle bearings. The bronze bushing provides a higher load rating than the comparable needle bearings (3,500 lbs vs 3,100 lbs dynamic radial load), is completely service-free, and will provide long-lasting performance.

The brace is plated with our signature gold zinc chromate for a long-lasting finish and is made here in the USA.

Note: MetalCloak recommends you have a suspension specialist align your Jeep once MetalCloak suspension is installed.

Note: This is not compatible with 2024+ models.

Note: The Sector Shaft Brace may require additional bump stop for better track bar clearance; 2" of bump stop is the minimum.

Note: The Sector Shaft Brace does NOT work on a factory height Jeep.

Note: The Sector Shaft Brace does NOT work with a drag link flip kit.



VIDEOS

MetalCloak's Jeep JL Wrangler Suspension

Sector Shaft Brace

The Sector Shaft Brace is CAD-designed, laser-cut, and attaches to the crossmember instead of adding force to the already stressed frame.

What is Corner Travel Index?

Since 2014 MetalCloak has tested thousands and thousands of rigs at events all across the country collecting specs on the build and cataloging the results. The data collected allows us to make our own products better.

Why Gold Zinc?

It's time for The MetalCloak Minute... where we answer frequently asked questions in about a minute. Today's topic: Gold Zinc.

THE TECH

Sector Shaft Brace

Close-up of vehicle's undercarriage with sector brace mounted, suspension components and part of a tire.

Supported at the vital sector shaft on your JL or JT, this brace provides additional protection with thick 3/8" formed steel. The sector shaft brace is CAD-designed, laser-cut, and attaches to the crossmember rather than the track bar bracket, splitting the force loads between the frame and crossmember.

Bronze Bushing

The high-load oil-embedded bronze bushing (self-lubricating) gives 100% bearing contact without any of the needle bearing issues found with inferior "braces".

A dark metal bronze bushing on a wooden surface.

What's in the Kit?

Contents of the MetalCloak JL Wrangler & JT Gladiator sector shaft brace kit, including the bracket, sector shaft nut, bronze bushing, and hardware.
  • Sector Shaft Bracket
  • Sector Shaft Nut
  • Bronze Bushing
  • All Required Hardware

TECHNICAL SPECIFICATIONS



Items Details
Compatibility 2018-2023 JL Wrangler & 2020-2023 JT Gladiator
Sector Shaft Brace 3/8" Hot-Rolled Steel
Coating Gold Zinc - Sector Shaft Brace
Clear Zinc - Sector Shaft Nut


IMPORTANT NOTES



Suspension Alignment: MetalCloak recommends you have a suspension specialist align your Jeep once MetalCloak suspension is installed.

Compatibility: This is not compatible with 2024+ models.

Bump Stop: The Sector Shaft Brace may require additional bump stop for better track bar clearance; 2" of bump stop is the minimum.

Stock Height: The Sector Shaft Brace does NOT work on a factory height Jeep.

Drag Link Flip: The Sector Shaft Brace does NOT work with a drag link flip kit.

INSTALLATION



Difficulty Easy
Body Modification Some Drilling
Time to Install 1 Hour


Fitment & Specifications

Brand Metal Cloak
Product Type Steering
Vehicle Fitment Jeep Wrangler JL, Jeep Gladiator JT
Part Number 7690
Metal Cloak Sector Shaft Brace, JL Wrangler | JT Gladiator (2018-2023)

$179.00

Questions about this part?
Call the shop.