ASFIR 4x4 USA
Nissan Pathfinder Fuel Tank Skid Plate by Asfir 4x4
Nissan Pathfinder Fuel Tank Skid Plate by Asfir 4x4
Couldn't load pickup availability
Share
The Asfir 4x4 Nissan Pathfinder Fuel Tank Skid Plate is a bolt-on aluminum guard built to protect the fuel tank from off-road impacts. Laser-cut from 1/4 in (6 mm) aluminum and tested on the V6 4.0L Pathfinder, it adds a reinforced barrier beneath the vehicle while keeping ground clearance close to stock. It's designed for Pathfinder owners who drive rocky or debris-heavy trails and want targeted fuel tank protection, ideally as part of a full underbody armor setup.
Key Features & Specs
- Material: Laser-cut 1/4 in (6 mm) aluminum
- Weight: 20 lb (9 kg)
- Engine compatibility tested: V6 4.0L Pathfinder
- Construction: Stiffening ribs for added structural strength
- Mounting hardware: Zinc-coated steel brackets, direct chassis bolt-on
- Installation: 100% bolt-on, no drilling or cutting required
- Ventilation: Built-in vent and drain openings for cooling and debris removal
- Included hardware: All mounting hardware supplied
- Origin: Made in Israel
How it Compares
| Feature | This Product | Why It Matters |
|---|---|---|
| Material and Thickness | Laser-cut 1/4 in. (6 mm) aluminum | Precise cutting ensures accurate fitment while the 6 mm gauge resists impact from rocks and debris |
| Weight | 20 lb (9 kg) | Adds underbody protection without a significant weight penalty affecting fuel economy or handling |
| Mounting Hardware | Zinc-coated steel brackets, bolt-on with all hardware included | Corrosion-resistant brackets support a no-drilling, no-cutting install using factory mounting points |
| Ventilation and Drainage | Includes ventilation and drain openings | Allows heat to dissipate and debris or water to clear instead of collecting against the fuel tank |
| Structural Reinforcement | Stiffening ribs built into the panel | Increases rigidity across the plate so it resists flexing or denting under repeated impact |
| Engine Testing | Tested on the V6 4.0L Pathfinder engine | Confirms clearance and fitment were verified on this specific drivetrain configuration |
Recommended Use Cases
- Protecting the fuel tank from rock strikes and debris on off-road trails
- Overlanding trips where the underbody is exposed to prolonged rough terrain
- Pairing with ASFIR's complete Pathfinder underbody protection set for full chassis coverage
- Owners seeking a bolt-on skid plate upgrade without drilling into the factory chassis
- Off-road driving where maintaining ground clearance is a priority alongside protection
Frequently Asked Questions
What's the best skid plate to protect my Pathfinder's fuel tank on off-road trails?
This ASFIR skid plate is built from laser-cut 1/4" (6 mm) aluminum with stiffening ribs and bolts directly to the chassis with zinc-coated steel brackets, giving the fuel tank a dedicated protective barrier against rocks and debris. It is tested on the V6 4.0L Pathfinder and includes ventilation and drain openings so heat and dirt do not build up underneath.
Will this fuel tank guard add too much weight to my Nissan SUV?
At 20 lb (9 kg), the plate uses 1/4" (6 mm) aluminum rather than thicker steel, which keeps the added mass modest while the stiffening ribs maintain structural strength. This makes it a reasonable choice for owners who want fuel tank protection without a heavy steel setup weighing down the underbody.
Does installing this skid plate require drilling or cutting into the Pathfinder's chassis?
No, installation is 100% bolt-on and uses the included mounting hardware along with zinc-coated steel brackets that attach to existing chassis points. No drilling or cutting is needed to fit the plate to the Pathfinder's structure.
Is this skid plate suitable for a Pathfinder set up for overlanding with full underbody protection?
Yes, ASFIR recommends this fuel tank skid plate as part of its complete Pathfinder underbody protection set, so it is designed to work alongside other skid plates rather than as a standalone piece. Pairing it with the rest of the set gives more complete coverage for extended off-road or overlanding use.
How does the plate handle heat and mud buildup around the fuel tank?
The design includes ventilation and drain openings specifically for cooling and easy debris removal, which helps prevent mud and moisture from accumulating against the tank. This is a practical detail for trail driving where water crossings and mud are common.
