2003-2024 4Runner Garmin PowerSwitch Ready To Run Kit

*Please note that these Toyota Garmin PowerSwitch kits take 1-3 weeks to ship.

 5th Ready to roll, plug-and-play Garmin PowerSwitch Kit.

If you have a 4th or 5th-generation Toyota 4-Runner, you may already know that there are a handful of switching system kits on the market. However, none are as complete or as easy to install as ours. Our kit was developed after years of doing complex electrical installations for customers. Through the years we have built, modified, and refined our kits to be as easy as possible to install while maintaining the quality and reliability demanded from Toyota owners. 

Key Features:

• Works with 4th/5th gen 4-Runner, Lexus GX470, and Lexus GX460.
• EASY install. Our complete kits come pre-assembled and ready to install. Typical customer install time is under 30 minutes.
• USA-made high-quality aluminum bracket with USA-made stainless hardware.
• PEM nut mounting hardware, so no more dealing with installing washers and nuts on the back side of the bracket.
• High-quality Blue Sea Systems components are included with kits to ensure the longevity of your accessory components.
• Heat and abrasion-resistant, USA-made motorsports-grade battery cables
• MRBF fuses are included to remove all unfused cable that comes with inline fuse applications. This helps lower the short-to-ground related fire risk that can happen should you get in an accident, or have your battery shift offroading. 

Included in the complete kit and kit without PowerSwitch Options:

• Garmin PowerSwitch unit (if full kit is selected)
• Blaze Off-Road vehicle-specific Garmin PowerSwitch mount bracket
• Blaze Off-Road vehicle-specific battery cables (x3)
• Blue Sea Systems 2314 ground bar
• Blue Sea Systems 5045 4 fuse block
• Post-Mount (MRBF) Fuse Set-up (terminal fuse mount, hardware, cover, and both needed fuses)
• All Hardware needed

Included in the Bracket and hardware-only kit:

• Vehicle-Specific Garmin PowerSwitch Bracket
• Hardware

Not Included but may be shown in photos:

• Garmin Tablet/ Navigator
• Cell Phone for control
• Electrical accessories not listed above
• Other Garmin Products

Does NOT include new battery terminals

*Aftermarket terminals are required for newer 4Runners with the factory battery terminal fuse. 

*If you have hood struts, you will need spacers to space the bracket away from them. 

Hood Strut Spacer Kit

*This Garmin PowerSwitch Kit will work on 2019+ 4-runners and GX vehicles with a very slight modification (cut or bend) to a factory bracket. This can be done with a grinder or sheet metal shears. Video

*We typically recommend removing the factory plastic cover on the Lexus GX models to allow for better access to the kit. 

*Please note that these Toyota Garmin PowerSwitch kits take 1-3 weeks to ship.