Skip to product information
1 of 3

Metal Cloak

Metal Cloak Jeep JK Wrangler Baller Joints™, HD Ball Joints, Full Set

Metal Cloak Jeep JK Wrangler Baller Joints™, HD Ball Joints, Full Set

Regular price $699.00
Regular price Sale price $699.00
Sale Sold out
Shipping calculated at checkout.

"BALLER" Informal adjective: extremely good, impressive or excellent.

MetalCloak's Baller Joints™ HD Ball Joints for the Jeep JK Wrangler are the ONLY ball joints that are comprised of top level materials with ALL the best features contained in one package. This is the last ball joint you will ever need. Upper and Lower Load Bearing, Captured, Fully Sealed, Adjustable, In-Jeep rebuildable and made in the USA.

Features Include:

  • Fits 2007-2018 JK Wrangler & Wrangler Unlimited
  • Load Bearing Upper and Lower Joints
  • Hardened Tool Steel Races
  • Induction-Hardened Chromoly Spindle & Ball
  • Composite Bushing For Radial Loads (Side to Side Movement)
  • Load-Rated Composite Bushing at Over 23,000 lbs Each, X2!
  • Fully Sealed Top and Bottom O-Ring AND Shaft Wiper Seals
  • Recessed Zerk Fittings For Easy Service/Grease
  • Adjustable Pre-Load for Upper & Lower Joints
  • In-Jeep Rebuildable Upper & Lower
  • Gold Zinc, Clear Zinc & Type 3 Hard Anodized Black Finish
  • Made in the USA
MetalCloak uses the best features and combines them with top quality materials to create a ball joint replacement set that is unrivaled; this is the only ball joint that is Fully Sealed, Captured, Adjustable, On-Jeep rebuildable and made in the USA. Replace your worn ball joints with the best you can get.

MetalCloak ball joints start with a Chromoly spindle & ball with an induction-hardened surface strength that resists wear and provides a maximized bearing area to distribute force loads; the material gives superior ability to absorb energy without fracture over inferior materials.

Composite bearing sleeves slide over the spindle to handle shock loads and are the most resistant to deformation. Ball and spindle are both load bearing and utilize metal-on-metal strength captured with Tool Steel Races that eliminate memory steer and are long-lasting.

Both upper and lower joints are adjustable for preload tension, have recessed zerk fittings for servicing and are sealed with multiple Buna-N Rubber O-Rings along with wiper seals on the shafts to keep contaminants out and grease in.

Aluminum lock nut and thread-on top cap capture the joints so there is no possibility of pulling the joints out of the C.

Type 3 Hard Anodized Black aluminum with Silver and Gold Zinc steel plated components highlight the quality and craftsmanship and are sure to let others know you appreciate American-made quality and top-notch performance. Sealed, Captured, Adjustable, and On-Jeep rebuildable; the last ball joints you will ever need.

Note: These are NOT compatible with TeraFlex Aftermarket D44 Axles.



VIDEOS

MetalCloak's Jeep Wrangler Accessories

Why Gold Zinc?

It's time for The MetalCloak Minute, where we answer frequently asked questions in about a minute. Today's topic: Gold Zinc.

Proudly Made in the USA

MetalCloak proudly manufactures products in America. Take a glimpse of our incredible team that lives and breathes innovation and quality.

THE TECH

Upper & Lower Upgraded Ball Joints

MetalCloak offers the ONLY ball joints that are comprised of top level materials with ALL the best features contained in one package; this is the last ball joint you will need. Upper and Lower Load Bearing, Captured, Fully Sealed, Adjustable, In-Jeep rebuildable and made in the USA.

Two renderings of ball joints, one black and gold and one gold, on a white background.

Upper Ball Joint Upgrade

(Give it a spin to see a 360 view)

Upper Ball Joint Diagram

Labeled diagram of the MetalCloak upper Baller ball joint, including the black anodized cap, O-rings, wave spring, and split pin.

Load Bearing Joints

Pre-load on the upper ball joint diverts force-loads from the lower joint and shares the load between both pivot locations.

Comparison of axle designs showing force load distribution differences between other manufacturers and MetalCloak.

Thread Together Captured Design

Animation of the ball joint installing from the bottom of the C as the black cap encapsulates the top.

Ball joints press in from the bottom of the C, then the aluminum lock nut and thread-on top cap capture the joints so there is no possibility of pulling the joints out.

Shaft & Ball Benefits

MetalCloak ball joints start with a Chromoly spindle & ball with an induction-hardened surface strength that resists wear with superior ability to absorb energy without fracture over inferior materials while providing a maximized bearing area to distribute force loads.

A metal spindle and ball with a lathe tailstock taper laying on a wooden surface.

Bearing Races

Two-part metal bearing races with a circular design, on a wooden surface.

The Concave Bearing Races are high-impact, shock-resistant, machined and heat-treated S-7 tool steel with maximum surface contact to spread force loads; this allows more pre-load relief while still resisting memory steer.

Lower Ball Joint Upgrade

(Give it a spin to see a 360 view)

Lower Ball Joint Diagram

Exploded diagram of a mechanical joint with labeled parts, including races, seals, and tensioner.

Ball Joint Wrench

The included wrench is specially designed and laser-cut to precisely fit the lower ball joint and allows for ease of maintenance. The wrench is made of laser-cut 3/16" hot-rolled steel; the tool is finished in gold zinc for a classic premium look and long-lasting MetalCloak quality.

A hand holding a spanner wrench with lower ball joint over a vise, with tool bins in the background.

Made in America

Hands assembling a black cap on a ball joint on a white workbench.

The MetalCloak Upper and Lower Ball Joints are made right here in the USA.

What's in the Kit?

  • Upper Ball Joints
  • Lower Ball Joints
  • Ball Joint Wrench
Contents of the MetalCloak JK Wrangler Baller Joints HD Ball Joint kit, including the upper ball joints, lower ball joints and ball joint wrench.

TECHNICAL SPECIFICATIONS



Items Details
Compatibility 2007-2018 JK Wrangler & Wrangler Unlimited
Upper Ball Joint Cap 6061 Aluminum Hex
Upper Ball Joint Spindle Chromoly Steel
Upper Ball Joint Housing AISI 1045 Steel
Lower Ball Joint Cup AISI 1045 Steel
Lower Ball Joint Spindle Chromoly
Ball Joint Wrench 3/16" Hot-Rolled Steel
Coating Gold Zinc | Clear Zinc | Black Anodize


IMPORTANT NOTES



Axle Compatibility: These are NOT compatible with TeraFlex Aftermarket D44 Axles.

INSTALLATION



Difficulty Moderate
Body Modification None
Time to Install 4-5 Hours


Fitment & Specifications

Brand Metal Cloak
Product Type Joints & Bushings
Vehicle Fitment Jeep Wrangler JK
Part Number 1910
View full details