Skip to product information
1 of 3

Metal Cloak

Metal Cloak JK/JL Wrangler & JT Gladiator HydraStrike Hydraulic Bump Stops, Front, Pair

Metal Cloak JK/JL Wrangler & JT Gladiator HydraStrike Hydraulic Bump Stops, Front, Pair

Regular price $829.00
Regular price Sale price $829.00
Sale Sold out
Shipping calculated at checkout.

The HydraStrike Nitrogen-Charged Hydraulic Bumps are engineered to deliver controlled, repetitive bottom-out performance for aggressive off-road use without compromise. They are designed specifically for the front upper bump location on Jeep JK/JL Wranglers and JT Gladiators. MetalCloak HydraStrike focuses on performance, durability, compatibility, and consistent damping when it matters most.

Features Include:

  • Compatible with JK/JL Wranglers & JT Gladiators
  • Hydraulic Nitrogen-Charged, Oil-Damped Bump Stops
  • Made of .125" Wall Tube Shaft For Increased Strength
  • Disogrin Seals For Superior Sealing Performance & Wear Resistance
  • 5/8" Wide PTFE-Lined Shaft Bearing
  • Body Threads Match the Fox Weld-In Mounts for Compatibility
  • Internal Reservoir Design
  • No Warm-Up Required
  • Molded Rubber Strike Pad
  • Reduced Noise & Softer Impact Feel
  • Quick and Easy Installation
  • Made In The USA
Unlike emulsion-style bumps that require heat buildup before they function properly, the HydraStrike piston design with internal reservoir delivers consistent damping performance from the very first hit. Whether dropping off an obstacle or absorbing repeated high-speed hits, HydraStrike maintains predictable control from the first impact.

The HydraStrike Disogrin seals are used to deliver exceptional sealing performance and long-term wear resistance in harsh off-road environments. These oversized, industry-leading seals provide a larger contact surface that better resists contamination, reduces leakage, and maintains consistent damping performance over time. The result is a hydraulic bump that stays smooth, reliable, and serviceable even after repeated harsh impacts.

The massive 5/8" wide Polytetrafluoroethylene (PTFE) lined shaft bearing is built into the HydraStrike to better distribute side loads and reduce friction under compression. This wider bearing improves stability during angled or high-speed impacts, minimizing shaft deflection and premature wear. The PTFE lining ensures smooth operation without binding, all while extending the service life in demanding off-road conditions.

The HydraStrike body threads allow direct compatibility with existing Fox weld-in mounts, making upgrading simple for users already running Fox hardware and eliminating the need for cutting, re-welding, or replacing mounts. It provides a true bolt-in performance upgrade path that saves time and money.

Each HydraStrike includes a molded rubber strike pad with an integrated steel core to refine impact feel and reduce noise at full compression. This design softens harsh bottom-outs while maintaining durability, making it ideal for daily drivers and trail rigs. The steel core ensures long-term strength without sacrificing performance.

HydraStrike is built around a .125" wall tube shaft, providing a substantial strength advantage over the thinner .085" wall designs. This thicker shaft improves resistance to bending and deformation under extreme loads, increasing durability during hard impacts and aggressive driving. This gives you the confidence to push your suspension to its limits.



VIDEOS

MetalCloak's Jeep Suspension

What is Corner Travel Index?

Since 2014 MetalCloak has tested thousands and thousands of rigs at events all across the country collecting specs on the build and cataloging the results. The data collected allows us to make our own products better.

THE TECH

Front HydraStrike Hydraulic Nitrogen-Charged Bump Stops

Incredible Strength

Side-by-side view of the MetalCloak HydraStrike with one solid exterior rendering and one ghosted transparent rendering revealing internal components.

HydraStrike is built around a .125" wall tube shaft, providing a substantial strength advantage over the thinner .085" wall designs. This thicker shaft improves resistance to bending and deformation under extreme loads, increasing durability during hard impacts and aggressive driving. This gives you the confidence to push your suspension to its limits.

Industry-Leading Disogrin Seals

The HydraStrike Disogrin seals are used to deliver exceptional sealing performance and long-term wear resistance in harsh off-road environments. These oversized, industry-leading seals provide a larger contact surface that better resists contamination, reduces leakage, and maintains consistent damping performance over time. The result is a hydraulic bump that stays smooth, reliable, and serviceable even after repeated harsh impacts.

Close-up of the HydraStrike hydraulic bump stop showing the Disogrin seals engineered to maintain oil control, reduce wear, and ensure consistent damping performance.

PTFE-Lined Shaft Bearing

Close-up of the HydraStrike hydraulic bump stop featuring the 5/8-inch wide PTFE-lined shaft bearing designed for smooth, low-friction operation and long service life.

The massive 5/8" wide Polytetrafluoroethylene (PTFE) lined shaft bearing is built into the HydraStrike to better distribute side loads and reduce friction under compression. This wider bearing improves stability during angled or high-speed impacts, minimizing shaft deflection and premature wear. The PTFE lining ensures smooth operation without binding, all while extending the service life in demanding off-road conditions.

Internal Reservoir

The HydraStrike's internal reservoir is engineered to maintain a precise nitrogen charge while keeping it completely separated from the shock oil. This separation eliminates foaming, stabilizes pressure, and ensures damping remains consistent no matter how hard the suspension is pushed. It's a design focused on durability, consistency, and uncompromising off-road performance.

Cutaway view of the HydraStrike hydraulic bump stop showing the oil chamber, piston, and nitrogen-charged internal reservoir that keeps gas and oil separated for consistent damping.

Molded Rubber Strike Pad

Close-up of the HydraStrike hydraulic bump stop showing the molded rubber strike pad designed to absorb impact and protect suspension components.

Each HydraStrike includes a molded rubber strike pad with an integrated steel core to refine impact feel and reduce noise at full compression. This design softens harsh bottom-outs while maintaining durability, making it ideal for daily drivers and trail rigs. The steel core ensures long-term strength without sacrificing performance.

What's in the Kit?

  • HydraStrike (2)
Contents of the MetalCloak front HydraStrike hydraulic bump stop kit, including two HydraStrike bump stops.

TECHNICAL SPECIFICATIONS



Items Details
Compatibility 2007-2018 JK Wrangler, 2018+ JL Wrangler & 2020+ JT Gladiator
Bump Stop Body Aluminum 6061-T6
Bump Stop Tube Shaft Steel, SAE C1045
Piston Aluminum 6061-T6
Body Nut Steel Tube, DOM A513
Bottom Cap Aluminum 6061-T6
Strike Pad Molded Rubber
Finish Hard Anodized Black - Bump Stop Body
Gold Zinc - Body Nuts


INSTALLATION



Difficulty Moderate
Body Modification Cutting
Time to Install 2 Hours


Fitment & Specifications

Brand Metal Cloak
Product Type Track Bars, Sway Bars & Bump Stops
Vehicle Fitment Jeep Wrangler JL, Jeep Gladiator JT, Jeep Wrangler JK
Part Number 1710
View full details