Metal Cloak
Metal Cloak RockSport BLACK XD Adjustable Steering Damper/Stabilizer, JK/JL Wrangler, JT Gladiator
Metal Cloak RockSport BLACK XD Adjustable Steering Damper/Stabilizer, JK/JL Wrangler, JT Gladiator
Couldn't load pickup availability
Share
The RockSport Black XD Adjustable Steering Damper is engineered for Jeep drivers who want precise steering control and high-end performance without compromise. With its through-shaft design and unique on-shaft adjustment, it delivers consistent damping, reduced steering feedback, and true left-to-right balance.
Features Include:
- On-Shaft 6-Position Adjustable Damping
- Through-Shaft Design For Neutral Steering Feel
- Clockable Shock Reservoir For Clearance Flexibility
- Gold Titanium Nitride Coated (TiN) Shaft
- Mil-Spec Type III HARD Anodized Black Infinity Finish
- CNC Aluminum Billet Tie Rod Mount
- Designed For JK/JL Wrangler & JT Gladiator
- Quick & Easy Installation
- Made In The USA
The stabilizer comes with a simple-to-use six-position adjustment knob to change the compression settings with ease, no tools required. Choose from 6 settings that add an additional 10% compression force at each click to tune in your Gold Standard. The adjustment knob provides precise tuning to match vehicle setup and driving conditions. Whether dialing in lighter damping for daily driving or firmer control for oversized tires and aggressive terrain, adjustments can be made quickly without removing the stabilizer.
The steering stabilizer reservoir can be clocked to accommodate unique clearance requirements, making it ideal for custom suspension layouts and high-articulation builds. This flexibility allows optimal fitment around track bars, tie rods, and other steering components without compromising performance or travel.
The shaft is finished in a titanium nitride coating (TiN) to reduce friction and wear at the sealing surfaces, resulting in a smoother operation as well as improved longevity. The low-friction surface allows the stabilizer to react quickly to steering inputs and impacts, delivering consistent damping while standing up to dirt and repeated high-load cycles.
The stabilizer body is finished in a Mil-Spec Type III HARD anodized black infinity finish for durability in harsh environments. It provides increased resistance to corrosion, abrasion, and trail debris while maintaining a clean, understated look.
The stabilizer comes with a two-piece, CNC aluminum billet tie rod mount. The mount was designed specifically for the MetalCloak tie rod for the Jeep JK/JL/JT but will fit any 1.625" OD, 1.75" OD, or 2" OD tie rod. The tie rod mount has recessed bolt hole locations to protect the hardware from damage and is finished in an anodized black finish for a clean look.
The RockSport Black Steering Damper is proudly made in the USA, ensuring consistent quality, precision manufacturing, and reliable performance. It is designed for a quick and easy installation, allowing it to bolt on with minimal effort so you can get back on the road or trail in no time.
Note: Hardware supplied mounts to OE track bar bracket on axle end. If using a high steer bracket, different hardware to match your application may be required.
VIDEOS
MetalCloak's Jeep Suspension
What is Corner Travel Index?
Since 2014 MetalCloak has tested thousands and thousands of rigs at events all across the country collecting specs on the build and cataloging the results. The data collected allows us to make our own products better.
THE TECH
RockSport Black Steering Stabilizer
Through-Shaft Design

The RockSport Black Steering Stabilizer's through-shaft design applies equal damping force in both directions, preventing the stabilizer from pushing the steering wheel to one side. This results in balanced, predictable steering and improved on-center feel, especially noticeable at highway speeds and on uneven surfaces.
Six-Position Adjustment
The stabilizer comes with a simple-to-use six-position adjustment knob to change the compression settings with ease, no tools required. Choose from 6 settings that add an additional 10% compression force at each click to tune in your Gold Standard. The adjustment knob provides precise tuning to match vehicle setup and driving conditions. Whether dialing in lighter damping for daily driving or firmer control for oversized tires and aggressive terrain, adjustments can be made quickly without removing the stabilizer.

Clockable Shock Reservoir

The steering stabilizer reservoir can be clocked to accommodate unique clearance requirements, making it ideal for custom suspension layouts and high-articulation builds. This flexibility allows optimal fitment around track bars, tie rods, and other steering components without compromising performance or travel.
Gold Titanium Nitride Coated Shafts
The shaft is finished in a titanium nitride coating (TiN) to reduce friction and wear at the sealing surfaces, resulting in a smoother operation as well as improved longevity. The low-friction surface allows the stabilizer to react quickly to steering inputs and impacts, delivering consistent damping while standing up to dirt and repeated high-load cycles.

Aluminum Billet Tie Rod Mount

The stabilizer comes with a two-piece, CNC aluminum billet tie rod mount. The mount was designed specifically for the MetalCloak tie rod for the Jeep JK/JL/JT but will fit any 1.625" OD, 1.75" OD, or 2" OD tie rod. The tie rod mount has recessed bolt hole locations to protect the hardware from damage and is finished in an anodized black finish for a clean look.
Billet Mount Captured Bolt Design
The RockSport Black Steering Stabilizer uses a through-bolt tie rod mount captured by a nut rather than threaded aluminum, eliminating thread loading to reduce stress risers and improve long-term durability. When installed, the bolt is positively captured by the tie rod and top-side nut to prevent the clamp bracket from becoming unsecured. A retained spherical bearing inside the clamp supports the bolt, allowing smooth articulation while isolating clamp forces from the aluminum mount.

What's in the Kit?

- Steering Stabilizer
- Billet Mount
- All Required Hardware
TECHNICAL SPECIFICATIONS
| Items | Details |
|---|---|
| Compatibility | 2007-2018 JK Wrangler, 2018+ JL Wrangler & 2020+ JT Gladiator |
| Stabilizer | 2" OD x 1/4" Wall 6061-T6511 Aluminum Tube |
| Shafts | .625" Round Bar |
| Billet Mount | Aluminum 6061-T6 |
| Finish | Hard Anodized Black Finish - Stabilizer Body Gold Titanium Nitride - Shaft |
IMPORTANT NOTES
Tie Rod Mount: The billet tie rod mount is designed to fit a 1.625" OD, 1.75" OD, or 2" OD tie rod.
Hi-Steer Bracket: Hardware supplied mounts to OE track bar bracket on axle end. If using a high steer bracket, different hardware to match your application may be required.
INSTALLATION
| Difficulty | Easy |
| Body Modification | None |
| Time to Install | 1 Hour |
Fitment & Specifications
| Brand | Metal Cloak |
|---|---|
| Product Type | Shocks & Shock Mounts |
| Vehicle Fitment | Jeep Wrangler JL, Jeep Gladiator JT, Jeep Wrangler JK |
| Part Number | 2550 |
